Professional Documents
Culture Documents
① Place the device on Pad within ② Connect charging adpator's DC jack to magnetic
① Put the external battery in the external ② Pull out the external battery's output
outline pattern. connector. After connecting, place the magnetic
battery pocket. jack out of the pocket thru the
conector near the device and push the cable in
undercover of sleeve.
the holder.
③ Move magnetic connector calble ④ Magnetic connertor will stick to the device
③ Hook neck strap to main body's ④ Plug in external battery's output
to the device manually unless together.
D ring. jack to main body's charging
connected.
terminal.
I. While charging begins, the indicator II. When the device is fully charged, the
lamp displays red. indicator lamp displays green.
⑤ Appearance after a neck strap hooked
with the device
How to exposure Main control screen consist
① ③ ⑤
⑥
④
②
⑧
② Use the navigation button (Upper arrow for increase,
Low arrow for decrease) to adjust the exposure time.
③ Exposure buttons are set due to the position of the ② Pedo Mode ⑥ Status of Battery
slide switch. For example, the slide switch is in the right ③ Teeth part of adult ⑦ Exposure setting time
position then right exposure button will be functioned. ④ Teeth part of Pedo ⑧ Exposure Button status (Left, Right)
CAUTION
The battery is designed as an embedded. Unauthorized detaching the label
④ The x-ray will be exposed when exposure button is could cause warranty or legal issue. Please refrain removing the label.