Professional Documents
Culture Documents
Auxmach 1 (B) Final Quiz
Auxmach 1 (B) Final Quiz
FINAL QUIZ
10. The best method of fixing a winch motor bearing of the sealed
type that is running hot is to ______ Replace new bearing
_______
14. The most common failure related to the crane is the failure of
___wire____
B.
16. The principal purpose of an anchor windlass chain stopper is to
______hold the anchor_______
24. How would you direct the crane operator to hoist the load if you
are the one making the hand signal to the crane operator? ___
Extend an arm vertically, pointing a finger toward the sky, and
make small clockwise circles with the hand.____
25. How will you know if the mooring winch’s brake band is still in
good condition? ___ Ensure that pressure gauge on the hydraulic
jack showing zero.___
26. What would you do if you saw the brake lining has worn away?
__replace a new break lining
29. If an anchor windlass has been idle for some time, you should
___lubricate___
30. The best method of fixing a winch motor bearing of the sealed
type that is running hot is to ___ apply a light oil to the bearing
housing. ____