Professional Documents
Culture Documents
Summit Boot
Summit Boot
abbreviations
• Approx..……approximately
• beg.....................beginning
• BLO………….back loop only. Instead
of inserting your hook under both
Pull through until the invisible st is the same When instructed to join to ch2, join at the
size and appearance as the other slst’s. Sew in
orange arrow, when instructed to join to the 1st
ends.
Use normal slst’s to join all rounds unless hdc, join to blue arrow (on the left). If you join
instructed to finish with an invisible slst/join. to ch2, the first st of the round should be
worked into the 1st hdc (blue arrow).
When joining the soles together for round 4, Sole On the first round it changes back
ensure that the 2hdc at the centre of the heel
and forth from sc to hdc – so pay
of each sole is lined up with the other sole and
start your slst’s from here. This will ensure that attention!
the sole is nice and straight. Round 1. With MC, ch11, 2sc in 2nd ch from
hook, hdc 8, 6hdc in last, hdc 8, 2sc in last.
Join to 1st sc with a slst (26sts).
ends (42slsts – join counts as a st). Flip work back around the right way and
sew in ends (slst’s are on the inside).
Tongue
Size 3-6 mos
Row 1. Join MC in the BLO of the 5th
st to 4” (10cm) finished length
the right from the central hdctog (arrow).
Sole On the first round it changes back
and forth from sc to hdc – so pay
attention!
Go to finishing instructions on pg 8.
Tongue
Flip work back around the right way and
sew in ends (slst’s are on the inside). Row 1. Join MC in the BLO of the 5th st to
the right from the central hdctog (arrow).
Sides
Upper
Go to finishing instructions on pg 8.
Sides
(2sts).
Finishing – All sizes
Fur Trim
Copyright Notice
This pattern (including text and images) is copyright to
Inventorium. Please do not make copies for others. Do not
post or share this pattern (in whole or in part) on any form of
Continue to end. webpage or information sharing network and definitely do not
plagiarize my work. This pattern is my intellectual property and
Row 2. Ch1, turn, sc normally to end. may not be resold, shared, adjusted, modified or used to create
Fasten off and sew in ends. your own patterns or tutorials either in whole or in part. You
may sell finished items in small amounts but please credit
D ring tabs for laces Inventorium as the designer. © Alana Harley 2017. Thanks!
Follow me here…
Row 1. Using black CC3 yarn, and holding www.etsy.com/shop/inventorium
a D ring between your thumb and middle Instagram: @inventoriumpatterns
finger, join CC3 to ring with a ch1, then sc Facebook: www.facebook.com/inventoriumpatterns
Ravelry: www.ravelry.com/stores/inventorium
2 into the D ring along the straight edge