TECHNOGENIA S.A. Z.A. des Marais - BP 151 74410 SAINT-JORIOZ - FRANCE Tél. : +33 (0)4 50 68 56 60 Fax : +33 (0)4 50 68 62 77 E-mail : technogenia@technogenia.fr Web Site : http://www.technogenia.com The Technopowders have F.D.A. approval and can Technogenia markets three classes of Technopowder . ® therefore be used in the agrifood industry. 1. Nickel-based resurfacing powders 2. Premixed fused tungsten carbide powders Sphérotène® is a very high 3. Lasercarb® powders for special laser applications hardness fused tungsten carbide in the form of spherical grains.
Other compositions and
types of powder can be supplied on request. Special Powders for Laser Nickel-based Resurfacing Powders Premixed Carbide Powders Applications Supplied in 1 and 5 kg pots Supplied in 1kg pots Supplied in 1kg pots
Technopowder 20Rc: Technopowder 2030 Technopowder 4000 Technolase 60 S
Nickel Resurfacing Powder Nickel base + crushed fused tungsten carbide Nickel base + : Sphérotène 3000 Hv ± 500 Hv ® Base Nickel + Sphérotène®: very high hardness spherical Hardness: 20Rc 1800 to 2400 Hv Very high hardness spherical fused tungsten carbide fused tungsten carbide Base composition : Ni B Si Applications: thin hardfacing Applications: very high performance surfacing, low Special powder for laser resurfacing. Machining: possible Machining: not possible thicknesses Applications: boring tools, screens, protective plates, etc., Grinding: possible Grinding: possible Machining: not possible for all types of parts, including weldable cast iron and Main application: resurfacing of glassworks moulds Method of Application: Grinding: possible / depending on the shape stainless steel. Method of application: oxyacetylene torch: Technokit 2000 Method of application: oxyacetylene torch:Technokit 2000 Machining: not possible oxyacetylene torch:Technokit 2000 Grinding: possible / depending on the shape Technopowder 40/40 Technopowder 4040S Thickness: 0.5 to 3 mm (up to 5mm possible) Technopowder MB40: Nickel base + crushed fused tungsten carbide: Nickel base + : Sphérotène® 3000 Hv ± 500 Hv Method of application: heavy-duty laser 1800 to 2400 Hv Very high hardness spherical fused tungsten carbide Technogénia’s Lasercarb® process Underlayer Powder Applications: Hardfacing, medium thicknesses, causes very Applications: very high performance resurfacing, medium Hardness: 40Rc few deformations. thicknesses on subfinishes susceptible to deformation, e.g. Technolase 40S Main application: rust-inhibiting underlayer for Technodur® Crack-free hardfacing stainless steels. Nickel base + Sphérotène®: very high hardness spherical and Technosphère® Recommended for stainless steels, for example. Crack-free resurfacing. fused tungsten carbide Method of application: Machining: not possible Machining: not possible Special powder for laser resurfacing oxyacetylene torch: Technokit 2000 Grinding: possible / depending on the shape Grinding: possible / depending on the shape Applications: pump shafts, rolls in the iron and steel and Method of application: oxyacetylene torch: Method of application: oxyacetylene torch: paper industries, Technopowder 40 RC Technokit 2000 Technokit 2000 for all types of parts, including weldable cast iron and Hardness 40 RC stainless steel. Chrome nickel powder Machining: not possible Main application: glassworks punches Summary Table : TechnoPowder Grinding: possible / depending on the shape Method of application: oxyacetylene torch: Thickness: 0.5 to 6 mm (up to 8 mm possible) Technokit 2000 Item Base Alloy Melting Deposit Spherotene Crushed Carbide Carbide Recomm. Cat. Method of application: heavy-duty laser Alloy Hardness Point Density Carbide Carbide Concentration Size Dep. Technogénia’s Lasercarb ® process Hardness Hardness Thickness Technopowder 60Rc : Powder TP 60Rc 20RC NiCr 20 HRc 1050°C 8.6 no 1 to 3mm NiCr Hardness: 60Rc Powder Main application: finishing or sliding coat for barrel extruder MB40 NiCr 40 HRc 1087°C 8.2 no 0.5 mm NiCr and screw conveyor faces Powder TP 40 RC NiCr 40 HRc 1087°C 8.2 no 0.5 to 3 mm Method of application: NiCr oxyacetylene torch: Powder TP 60 RC NiCr 60 HRc 1038°C 7.8 no 1 to 2mm Technokit 2000 NiCr 1800 / 40% Powder TP2030 NiCr 60 HRc 1038°C 11.2 no 40-80µ 1 to 2mm 2400 HV by weight WC 1800 / 40% Powder TP40/40 NiCr 40 HRc 1087°C 10.5 no 40-100µ 1 to 2mm 2400 HV by weight WC Powder 3000± 40% TP4000 NiCr 60 HRc 1038°C 12 40-100µ 1 to 2mm WC 500 HV by weight Spherotene Powder 3000± 40% TP 4040S NiCr 40 HRc 1087°C 10.5 40-100µ 1 to 2mm WC 500 HV by weight Spherotene T.LASE 3000± + 60% Powder NiCr 60 HRc 1038°C 13 40-160µ 0.5 to 3mm 60S 500 HV by weight Lasercarb® T.LASE 3000± +60% Powder NiCr 40 HRc 1087°C 13 40-160µ 0.5 to 8mm 40S 500 HV by weight Lasercarb® average Recomm. Th.