Professional Documents
Culture Documents
Fuji Maintenance
Fuji Maintenance
Unit
Unit
Device Units
An inspection jig for the
upkeep of feeders.
Auto Feeder
Auto Splicing Unit Reel Loader
Maintenance Unit
Unit
http://www.fuji.co.jp/e/ Cat.No.NAD_2017.Aug_E
NXT Series / AIMEX Series Device Units
Device Units
FUJI intelligent Auto loading Tray unit-LT2 Tray unit-LTC Tray unit-LTW2 Tray unit-M
Stacked JDEDC Single Stacked Belt type
HexaFeeder Tray feeder-L Tray feeder-M
feeder feeder tray feeder stick feeder stick feeder stick feeder
Unit
Supports 8 to 104 Allows for six part Parts are This unit is used in Has 19 feeder slots Allows for up to 48 A tray part supply Used to supply one 2 to 4 inch chip 2 to 4 inch chip trays Four types are A unit in which A unit for supplying
mm wide tape. types to be loaded automatically place of a feeder and a dip flux unit tray parts and 25 8 unit that can be part type non-stop to trays are supported are supported. available for sticks are stacked various types of
in the space of four indexed to the pallet. can be set. mm tape feeders to loaded into a the machine from as well as JEDEC various part widths to allow for stick parts.
slots. pickup position just be loaded at the feeder pallet. stacked JEDEC trays. and lengths. non-stop part
by inserting tape same time. standard trays. supply.
into the rear of the
feeder.
- - ●
module type
M3 III / IIIc ● ● ● - - - - ● ● ●
Used with
M6 III / IIIc ● ● ● ● ● - ● ● ● ● ● ● ●
Stick Feeder Dip Flux Unit Reject Parts Conveyor GCU (Glue Check Unit)
Single Rotary-type Rotary-type Rotary-type Bridge-type Reject parts Reject parts Reject parts Reject parts
Vibratory vibratory dip flux unit dip flux unit conveyor M GCU
stick feeder dip flux unit dip flux unit conveyor L conveyor 1.5L conveyor M
stick feeder plus (High speed) (long type)
Unit
A unit for supplying A unit for supplying A unit for Supports varying Supports The dip tank moves Parts for which Supports 1.5 inch Used when two Trial glue dot
various types of stick parts which transferring flux to bump sizes. high-speed heads. back and forth to imaging errors parts for OF heads. tray unit-Ms are unit to measure
stick parts using are not free bumped parts create an even film occur are unloaded loaded. glue dot
vibration. standing. before placement. thickness using a without being
damaged.
diameters.
squeegee.
Applicable part size: Applicable part size: Applicable part size: Applicable part size:
74 x 180 x 25.4 mm. 74 x 180 x 38.1 mm. 45 x 180 x 13 mm. 45 x 180 x 13 mm.
M3 III / IIIc ● ● ● ● ● ● ● - ● - ●
module type
Used with
M6 III / IIIc ● ● ● ● ● ● ● - ● ● ●