Professional Documents
Culture Documents
Mechanical Governor
1000rpm
Electronic speed management
1000rpm
Governor reaction
PTO speed
R F
Best for transport
A light tractor is always the best choice for transport. New Holland T7000
tractors have more power available to pull the load, they do not waste it on
AUTO AUTO moving the tractor. A light haulage tractor also allows for larger payloads
while still staying within any local highway legislation limits.
rpm
1000 1200 1400 1600 1800 2000 2200
180/245
160/218
Nm Power
140/190
1000 Torque
120/163
900
100/136
800
ENGINE OUTPUT (hp) 225 235
Torque 210 80/109 246
PTO OUTPUT (hp) 205700 205 205 60/81 205
FORWARD SPEED (kph) 8 600 8 8 8
kW/hp(CV)
Forward
19 49.963
18 40.417
17 33.826
16 28.424
15 23.788
14 19.788
13 16.561
12 13.997
11 11.714
10 9.843
9 8.238
8 6.853
Reverse 7 5.735
10.676 6 4.822
8.935 5 4.035
7.508 4 3.391
6.284 3 2.833
5.227 2 2.361
4.375 1 1.976
20 10 0 10 20 30 40 50
kph
Speed diagram
2 3 EED
1 T O 1 0 % ENGINE SP TER
U P FOR GREA
REDUCTIONECONOMY*
FUEL
1700
1700
1550
1500
1400
forward
1300
0 5 10 15 20 25 30 35 40 45 50
T7000 Competitor A Competitor B
kph
AUTO AUTO
R F
LIFTING FORCE
High output implements such as reversible
ploughs demand greater lifting capacity.
Optional 110 mm lift rams give a maximum lift
capacity of 10320 kg ensuring the heaviest of
implements are catered for.
PRODUCTIVE HYDRAULICS
High oil flow is essential for productivity.
Especially for implements like precision air
seeders that need maximum consistent oil
output. T7000 tractors deliver this with an oil
flow of up to 150 litres per minute, and thanks to
a separate, dedicated steering pump, hydraulic
performance is not compromised. In the right
conditions EPM increases engine power to
maintain productivity and forward speed.
DURABLE HYDRAULICS
Flat face hydraulic connectors considerably
reduce the chance of oil leaks. Premium quality
seals keep out contaminants. Hydraulic oil
temperature has been significantly reduced
over previous and competitive models to deliver
consistent performance and a reliable system.
Designed for productivity
Where specified, the full integrated front
linkage and PTO can be operated via
the armrest mounted controls or front
mounted controls. Purpose developed
for T7000 tractors, the linkage will lift
up to 3785 kg. Lift arms can be folded
up when not in use.
Finished using high quality materials, the spacious Horizon™ cab provides exceptionally high levels of comfort.
All-round visibility allows the operator to see exactly what is going on through 360 degrees.
72
up to 42%
less noise
70
[dB(A)]
68
66
Competitor T7000
Easy cab access Every decibel makes a difference Auto Comfort™ seat
Manufactured from a single piece Sound levels are recorded in decibels, a does what it says
of glass, the one-piece doors on logarithmic scale that means a one decibel Low frequency suspension
New Holland T7000 tractors open reduction leads to a significant drop in noise technology reduce shock loads
wide to provide easy cab access. levels. A typical tractor in the 165-215 hp(CV) reaching the operator. Over a long
The doors are easy to open category will have in-cab noise levels of between working day, this helps reduce
from inside the cab and, equally 71 and 72 dB(A). New Holland T7000 tractors fatigue. For the ultimate in luxury
important, can be closed from have noise levels as low as 69.6 dB(A). a heated grey leather Auto Comfort™
the operator’s seat. Small details The significance? Sit in a T7000 to find out. seat can be specified on
that make a big difference. No other tractors come close. SideWinder™ II tractors.
Tested electronics
The CAN-BUS electrical system employed in T7000 tractors reduces wiring
by 20% compared to existing designs and has 50% fewer connectors.
With the IntelliView™ monitor diagnostics checks are made simpler, faster
and more accurate. Engine power output and fuel usage are also shown
on the screen, helping the operator to optimise settings to minimise fuel use.
IntelliView Touchscreen
All key tractor controls can be accessed through this easy to navigate
touchscreen mounted on the SideWinder II armrest or for the Classic
configuration - the baler bar mount. IntelliView™ IV is standard on Auto
Command™ and optional on baler mount for Power Command™ tractors.
Ergonomic delight
The optional SideWinder™ II armrest comes as standard with electronic
remote valves. It brings all key controls within easy reach, with the
ergonomic layout reducing the movement needed to carry out repeated
operations. Quiet and offering brilliant all-round visibility, Horizon™ cabs
are designed and built to reduce the strain of a long working day.
Navigation Controller II
The Navigation Controller II is the main
control system which continually corrects
for roll, pitch, and yaw by using state
of the art 6-axis solid state inertial sensors
to give you a true on-ground position.
E D
B A
NEW HOLLAND.
A REAL SPECIALIST IN YOUR
AGRICULTURAL BUSINESS.
The data indicated in this folder are approximate. The models described here can be subjected to modifications without any notice by the manufacturer.
The drawings and photos may refer to equipment that is either optional or intended for other countries. Please apply to our Sales Network for any further
information. Published by New Holland Brand Communications. Bts Adv. (Turin) - 01/16 - MEA5133N/INB