Professional Documents
Culture Documents
INTERNATIONAL LLP
Innovative Solutions For More than you think
www.vurtexinternational.com 2
VURTEX INTERNATIONAL LLP
Strengths of Cup Forming Machine
Sealed by Copper Heating Rod resulting in better Sealing and Low Leakage Problems.
The applied Knurling Device is endowed with high pressure, over 10 times as high as that of
traditional Knurling Machine.
The retractable knife makes even wrinkles at the bottom of cup, leading to low leakage and long-
time use.
A Robot Arm is Used to collect and turn over cups, decreasing working time and energy cost.
VI-950 paper cup machine is improved based on the normal chain driving type. In this machine is
adopted which is based on Open Cam System(Automatic Gear Box).This machine runs a whole
procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom punching, heating, rolling, rimming,
rounding and tripping. It is an idea equipment for producing drinking cups, market cups, coffee
cups, advertising cups , etc. It is widely used for hot drink and beverage. If you need double pe
coated paper cups or paper gram higher 250g/m2, we recommend you to use Ultrasonic paper cup
machine. It can produce single pe coated paper cups and double pe coated paper cups.
Technical Specification
TypeTechnical
: Specification VI95 (Open Cam)
Type : PC95(Open Cam)
Cup size :
Cup size :
35-330 ml (different size mold exchanged)
35-330 ml (different size mold exchanged)
Suitable paper material : 150-380g/m2 (single or double PE-coated paper)
Suitable paper material : 150-380g/m2(single or double PE-coated
Capacity : 85-95 pcs/min
paper) Speed affected by cup size,paper quality & Thickness
Capacity : 85-95 pcs/min
Power source : 220V-380V 50HZ (please inform us your power in advanced)
Speed affected by cup size,paper
Total power : 7 KW quality & Thickness
Working Power
Power source : : 3.5 KW 220V、380V 50HZ(please inform us your
power in advanced)
Weight : power :
Total 2.8 Ton 7 KW
Package sizePower
Working : 2250 x 13403.5
x 1950
KW mm
Weight : 2.8 Ton
Package size : 2250 x 1340 x 1950 mm
Working Air Source: Air pressure 0.4Mpa
Air pressure
0.4Mpa; Air
Air output: 0.6m3/min
output:0.6m3/min
A: Top diameter: Min 45mm---Max 90mm
B:
A:Bottom diameter
Top diameter: Min 35mm--- Max 75mm
Min 45mm---Max
90mm
C: B: Bottom
Total heightdiameter
Min Min 35mm---
30mm--- Max 115mm
Max 75mm C: Total height Min 30mm---
Max 115mm
D: Bottom knurling depth Min 4mm---Max 12mm
D: Bottom knurling depth Min 4mm---Max
E: Rim diameter Usually Φ2.5---Φ3
12mm
E:Rim diameter Usually Φ2.5---Φ3
www.vurtexinternational.com 3
Advantage
age and
VURTEX INTERNATIONAL LLP
and improvement:
improvement:
1. Use
. Use of Open CamofTechnology
Open Cam Technology
instead Gearinstead
Box forGear
moreBox for more stable
stable
running and running and speed up.
speed up.
Advantage and improvement:
2.Use
continuous continuous
lubrication
2.Use continuous
lubrication
recycle
lubrication system
recycle
recycle system
instead
system instead of of
instead
oiling
oiling
of oiling
by hand
by hand
by handthe
to reduce
to reduce the friction
to
and
reduce
friction
and wear and gears,improve
between
wear between wear between
gears,improve gears,improve
the safety
the machine and the
machine machine
safety
reduce theand safety
costreduce
of and reduce
the cost
maintenance. of the cost o
maintenance.
nance.
www.vurtexinternational.com 4
VURTEX INTERNATIONAL LLP
3.We
3.We useuse 125gear
125 type type gearis box,which
box,which is longer life and
longer life and more
accurate.Normally,100 type gear box is used.
We use
more
e 125 125accurate.Normally,100
type typebox,which
gear gear box,which
is longeris longer
type life and
gear
life and box is used.
ore accurate.Normally,100
curate.Normally,100 typebox
type gear gearisbox is used.
used.
.We use 125 type gear box,which is longer life and
more accurate.Normally,100 type gear box is used.
VS
VS
The speed reducer and the gear box are very important to the machine.They control the whole
machine,if there are some problems with these two parts,then,you have to change the gear box and
peedspeed
reducer
reducer and and
the
reducer.In thecase,the
gear
this gearare
box box are
very
machine verybeimportant
important
should takento the to thethey are inside the machine.
apart,because
ine.They
hey control control
It takes the the whole
muchwhole
time,and machine,if
machine,if
sometimes there
you there
are
cannot are
some
install some
problems
the machine problems
withSo itwith
correctly. is necessary yo
speed reducer
two parts,then,you and the
use better gear box andhavegear box are
to reducer.
speed very important
change the gear box and speed to the
parts,then,you
The speed
hine.They have
reducer
control towhole
the change
and the the gear
gear
machine,if boxboxare
thereand speed
very
are someimportant
problems towith
the
er.In
his this case,the
case,the
machine.They machine
machine should
control theshould
be bemachine,if
taken
whole taken apart,because
apart,because
therethey they
areare
some areproblems with
e two parts,then,you
e the machine.It takeshave
much to change
time,and the gear
sometimesbox and
you speed
cannot install the
machine.It
thesethis
cer.In twotakes much time,and
parts,then,you
case,the machine sometimes
have to
should bechange you
www.vurtexinternational.com cannot install
the gear boxthey
taken apart,because the
andarespeed 5
VURTEX INTERNATIONAL LLP
5. New design5.knurling
New design
wheel knurling wheel
is used to is usedthe
guarantee to guarantee
even the even
pressure
5. New 5.
and
design New design
pressure
better
knurling bottom
wheel knurling
andisbetter
sealing.
used towheel
bottom is used
sealing.
guarantee toeven
the guarantee the even
pressure and better
pressure and better bottom sealing. bottom sealing.
7. We use manipulator to
transfer the cup body instead VS
of falling itself by pipe,It is
more stable and accurate
under the fast8.running.
Organ type 8.8. sucker
Organ type
istype
used sucker
for cup isfan
used forfan
sucked cup
to fan sucked
gaurantee to gaurantee
8. Organ Organ
type sucker sucker
is used is
for used
cup for
fan cup
sucked sucked
to to gaurantee
gaurantee
powerful
8. sucking
Organ 8.
powerful
type and Organ
powerful sucking
more
sucker type sucker
and more
successful.The
is type
used
sucking andfor cup
more is used
life for cup
fansuccessful.The
is much
sucked to fan
more sucked
lifeto
gaurantee ismore
longer to gaurantee
much more longer
8. 8. Organ sucker is successful.The
used for cup lifesucked
fan
Organ type sucker is used for cup fan sucked to gaurantee
powerful sucking and more successful.The life is much more longer is much longer
gaurantee
than normal
powerful suckingpowerful
than
sucker.
powerful and
than sucking
normal
more
normal
powerful
sucking sucker.
sucking
and and
more and
sucker. more
successful.The
more successful.The
life islifemuch
successful.The
successful.The lifelonger
lifemore
is much ismore
much islonger
muchlonger
more more longer
than normal sucker.
than normal than
sucker.
than normal
than normal
normal sucker.
sucker.sucker.
www.vurtexinternational.com 6
VURTEX INTERNATIONAL LLP
Knurling Motor
Main Motor Oil pump
Motor Knurling Motor
Automatic Oil Lubrication
MainAutomatic
Motor oil lubricate, keep the moving
Oil pumpparts (bearing, axis, cam, chain) more long
Motor
life time. And reduce the noise, machine running more stable and reliable.
Automatic Oil Lubrication
Oil: use 40#~50# machine oil (hydraulic oil), about 20~35 liter (cover the pump).
Automatic oil lubricate, keep the moving parts (bearing, axis, cam, chain) more
Main Motor long
Oil pump
e time. And reduce the noise, machine running more stable and reliable.
Motor
Oil: use 40#~50# machine oil (hydraulic oil), about 20~35 liter (cover the pump).
Automatic Oil Lubrication
Automatic oilKnurling
lubricate, keep
Motor
Knurling Motor
the moving part
Main
MainMotor
MotorMain Motor
lifeOil
time.
pump
Oil Oil
pump
And reduce the noise, machine running
Motor Knurling Motor
pump Knurling Motor
Motor Oil: use 40#~50# machine oil (hydraulic oil),
Motor
Motor
Automatic OilOil
Automatic Lubrication Oil pump
Lubrication
Automatic oil oil
Automatic lubricate,www.vurtexinternational.com
Motor
keep
lubricate, thethe
keep moving parts
moving parts Knurling
(bearing, axis,
(bearing, cam,
axis, Motor
chain)
cam, more
chain) longlong
more
7
omatic oil lubricate, keep the moving parts (bearing, axis, cam, ch
e. And reduce the noise, machine running more stable and reliab
VURTEX INTERNATIONAL LLP
use 40#~50# machine oil (hydraulic oil), Knurling
about Motor
20~35 liter (cover
Main Motor Oil pump
Automatic Oil Lubrication Motor
Automatic Automatic
oil lubricate,Oil Lubrication
keep the moving parts (bearing, axis, cam, chain) more long life time. And
reduce the Automatic
noise, machine runningkeep
oil lubricate, morethe
stable andparts
moving reliable.
(bearing, axis, cam, chain) more long
Oil: uselife
40#~50# machine
time. And reduceoilthe(hydraulic oil), about
noise, machine 20~35
running liter stable
more (coverand
the pump).
reliable.
Oil: use 40#~50# machine oil (hydraulic oil), about 20~35 liter (cover the pump).
www.vurtexinternational.com 8