Professional Documents
Culture Documents
INDEX
COMPANY PRESENTATION P. 4
CERTIFICATIONS P. 6
LOW VOLTAGE P. 13
MEDIUM VOLTAGE P. 17
LOW VOLTAGE P. 39
MEDIUM VOLTAGE P. 43
1
About the group
2
LEANER. SMARTER. SIMPLER.
FOR NEXANS, INNOVATION IS THE ART OF DOING THINGS BETTER FOR
THE BENEFIT OF OUR CUSTOMERS AND THE COMMUNITY.
3
NEXANS ITALY - OFFIDA
Company
presentation
INTRODUCTION
The origins of the Nexans Offida began with
a company called ITALCO founded in 1969.
Three entrepreneurs from Milan set up the company
in order to manufacture high quality
metal-connectors for the Italian energy networks.
The company’s focus soon shifted towards
the design and manufacturing of accessories
for cable installers.
4
R&D AND LABORATORY
Heatshrink tubes Heatshrink technology dates Our group of engineers and technicians use the
back to 1960s. In Nexans, thanks to R&D activity, most advanced tools and equipment to create,
HS technology has been improved and tailored verify and test all our products among the different
according to the market needs. Today we produce laboratories and material research centers of
a complete range of tubes to cover Low and Medium the Nexans group. Offida has extensive know
voltage applications till 52kV in our Extruders/ how in the field of heat shrink materials as well
Expanders lines with diameters starting from 20mm as mastics.
till 300mm and up to 4 different layers.
We are well equipped to perform physical
Mastics for electrical use: the complete range of our and chemical analysis of insulating, anti-tracking,
mastics have been developed and are manufactured and stress control materials, both for tubing and
totally in company, they are produced by means of mastics. We supply training and failure analysis
a 630 liter mixer in a dedicated part of the plant. for all our customers. In the electrical laboratory
we can perform type test and routine tes
Resins for electrical use, casting and insulating, (PD measurement at hot and ambient temperature,
have been designed by Nexans Italy for more heating cycles in air and water, humidity
than 35 years. and salt fog).
5
Certifications
Multisite certificate. Certified sites are listed in the appendix to this certificate
Bureau Veritas Italia S.p.A. certifies that the Management System of the
above organisation has been audited and found to be in accordance
with the requirements of the management system standards detailed below
ISO 9001:2015
Scope of certification
Via
Certification body Piemonte, 20-20096 PIOLTELLO
address: (MI) - Italy
Bureau Veritas Italia S.p.A., Viale Monza, 347 - 20126 Milano, Italia
Bureau Veritas Certification Holding SAS – UK Branch certifies that the Management System of the
IAF sector:
above 14,19
organisation has been audited and found to be in accordance with the requirements of the
Original cycle start date: management system standards detailed below 16-June-2006
Expiry date of previous cycle: 14-June-2021
Certification / Recertification Audit date:
ISO 45001:2018 14-May-2021
Scope of certification
Certification / Recertification cycle start date: 26-May-2021
Subject to the continued satisfactory operation of the organization’s
Design, manufacture
Management System, thisand trading
certificate of: energy
expires on: cables, telecommunication cables14-June-2024
in copper and
fiber optics obtained through drawing, stranding, extrusion, shielding and armouring process.
Certificate No.: obtained
Compounds IT306730
by coumpounding Version: 1
and extrusion Issue Date:
process. 26-May-2021and
Design, manufacturing
trading of accessories (joints, terminations, connectors, mastics and heat shrinkable products)
for energy cables obtained through extrusion, expansion, molding of plastics, resin and
mastics process. Management of installatio n and junctions process of (MV/HV) energy and
telecom cables for aerial and underground applications with supervision the excavations and
horizontal drillings.
IAF: 14, 19
Certification / Recertification
Further clarifications Audit
regarding the scope of this date:
certificate and the applicability of the management system11-September-2020
requirements may be obtained by consulting the organisation.
Certification / Recertification
To check this certificate cycle
validity please refer start
to the date:
website www.bureauveritas.it 12-October-2020
6
Signed on behalf of BVCH SAS UK Branch
Certification Body Address: 5th Floor, 66 Prescot Street, London, E1 8HG, United Kingdom
Carbon footprint external communication report (CFP report)
compliant with ISO 14067
EDS 1048
PEPecopassport N° NXNS-00097-V01.01-EN
FOR-58004 issue 14 CFP report 1
7
HEAT-SHRINK MEDIUM VOLTAGE INDOOR AND OUTDOOR
TERMINATIONS MONOi/MONOe FOR SINGLE/THREE CORE
POLYMERIC INSULATED CABLES UP TO Umax 42 kV
INSTALLATION
Each kit contains easy
guided installation
instructions with
installation steps made
by 3D pictures.
9
10
LOW VOLTAGE TERMINATIONS
11
1TTE
APPLICATION
The 1TTE heat-shrink low voltage outdoor termination kits are designed
for cables up to 4 cores with or without armor.
The adhesive coating on the lug sealing tubes, the breakout body and
fingers provides a good environmental seal, while the cores are protected
with thin or medium wall tubing.
All components are UV resistant.
KIT CONTENTS
- Breakout
- Core protection tube (thin or medium wall sleeves)
- Lug sealing tubes w. adhesive
- For armored cable: Armor continuity kit consist of corrosion protection
sleeve and earth braid
Application range
Type
(mm²)
Application range
Type
(mm²)
12
1SES
APPLICATION
The SES kits provides insulation for energized LV cables.
The end caps are spiral coated with adhesive, therefore the cables can be
left outdoors.
The caps are weathering resistant are supplied with the required
‘’energized’’ symbol warning mark.
KIT CONTENTS
- 3, or 4 core protective caps, 1 outer sealing cap
- Tinned copper mesh supplied neutral for concentric neutral cable
Meets specifications:
EN 50393
Application range
Type Max size Max. core Max. outer
(mm²) Ø cable (mm) Ø cable (mm)
13
14
MEDIUM VOLTAGE TERMINATIONS
MONOi I Heat-shrink MV indoor termination for single core polymeric cables with P. 16
Cu wire screen
MONOe I Heat-shrink MV outdoor termination for single core polymeric cables P. 17
with Cu wire screen
MONOi AI Heat-shrink MV indoor termination for single core polymeric cables with P. 18
Cu tape screen
MONOe AI Heat-shrink MV outdoor termination for single core polymeric cables P. 19
with Cu tape screen
MONOi FCi Heat-shrink MV indoor termination for single core polymeric cables with P. 20
Al tape screen
MONOe FCI Heat-shrink MV outdoor termination for single core polymeric cables P. 21
with Al tape screen
MONOi3 W Heat-shrink MV indoor termination for three core polymeric cables with P. 22
STA or SWA armor
MONOe3 W Heat-shrink MV outdoor termination for three core polymeric cables with P. 23
STA or SWA armor
MONOi3 CW Heat-shrink MV indoor termination for non armored three core polymeric P. 24
cables with copper wire screen
MONOe3 CW Heat-shrink MV outdoor termination for non armored three core P. 25
polymeric cables with copper wire screen
TK NOT ARM Heat-shrink trifurcations kits for MV applications cables without armor P. 26
TK ARM Heat-shrink trifurcations kits for MV applications cables with armor P. 27
TTGI1 Z Heat-shrink MV indoor termination for single core polymeric cables with P. 28
Cu wire/tape screen, AL wire/tape armor
TTGE1 Z Heat-shrink MV outdoor termination for single core polymeric cables P. 29
with Cu wire/tape screen, AL wire/tape armor
52TTGI1 Heat-shrink LHV indoor teminations for single core polymeric cables P. 30
with Cu wire screen
52TTGE1 Heat-shrink LHV outdoor termination for single core polymeric cables P. 31
with Cu wire screen
15
MONOi I
APPLICATION
The ‘’MONOi” terminations are a single component solution, for single core polymeric
cables.
TECHNICAL FEATURES
The ‘’MONOi’’ indoor terminations are designed for max system voltages of 42 kV for
compact switchgears as well as for installations where space is limited.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and red
anti-tracking sealing mastic.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Each “MONOi” termination kit contains material to allow for 3 phase installation.
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
3x12MONOi1.95i 25-95 12-20 20-34 300
3x12MONOi1.240i 70-240 16-30 24-40 300
3x12MONOi1.300i 95-300 18-32 26-44 300
12 kV 3x12MONOi1.400i 185-400 22-36 28-48 350
3x12MONOi1.630i 400-630 26-42 36-54 350
3x12MONOi1.1000i 630-1000 34-52 42-58 400
3x12MONOi1.1200i 1000-1200 44-58 48-64 400
3x24MONOi1.95i 25-95 14-26 24-42 350
3x24MONOi1.240i 70-240 18-34 30-44 350
3x24MONOi1.300i 95-300 20-38 32-50 350
24 kV 3x24MONOi1.400i 185-400 25-40 36-52 350
3x24MONOi1.630i 400-630 30-46 38-60 400
3x24MONOi1.1000i 630-1000 36-56 44-64 400
Sealing
3x24MONOi1.1200i 1000-1200 46-60 52-66 450 mastic
3x36MONOi1.95i 25-95 20-32 30-44 450
3x36MONOi1.240i 70-240 22-38 36-52 450 Mono
tube
3x36MONOi1.300i 95-300 24-42 38-54 450
36 kV 3x36MONOi1.400i 185-400 28-46 42-60 450 L
3x36MONOi1.630i 400-630 32-52 44-66 500
3x36MONOi1.1000i 630-1000 42-60 48-70 500
Stress relief
3x36MONOi1.1200i 1000-1200 48-64 54-72 500 mastic
3x42MONOi1.95i 25-95 20-34 34-50 500
Sealing
3x42MONOi1.240i 70-240 26-42 38-54 500 mastic
3x42MONOi1.300i 95-300 28-46 40-60 500
42 kV 3x42MONOi1.400i 185-400 32-48 42-64 550
3x42MONOi1.630i 400-630 34-56 46-68 550
3x42MONOi1.1000i 630-1000 44-62 50-74 550
3x42MONOi1.1200i 1000-1200 50-66 56-76 550
16
MONOe I
APPLICATION
The ‘’MONOe’ terminations are a single component solution, for single core polymeric
cables.
TECHNICAL FEATURES
The ‘’MONOe’’ outdoor terminations are designed for max system voltages of 42 kV.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and red
anti-tracking sealing mastic.
Anti-tracking rain sheds are supplied to withstand outdoor enviroments.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Each “MONOe” termination kit contains material to allow for 3 phase installation.
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
3x12MONOe1.95i 25-95 12-20 20-34 500
3x12MONOe1.240i 70-240 16-30 24-40 500
3x12MONOe1.300i 95-300 18-32 26-44 500
12 kV 3x12MONOe1.400i 185-400 22-36 28-48 500
3x12MONOe1.630i 400-630 26-42 36-54 500
3x12MONOe1.1000i 630-1000 34-52 42-58 500
3x12MONOe1.1200i 1000-1200 44-58 48-64 500
3x24MONOe1.95i 25-95 14-26 24-42 500
3x24MONOe1.240i 70-240 18-34 30-44 500
3x24MONOe1.300i 95-300 20-38 32-50 500 Sealing
mastic
24 kV 3x24MONOe1.400i 185-400 25-40 36-52 500
3x24MONOe1.630i 400-630 30-46 38-60 600
Mono
3x24MONOe1.1000i 630-1000 36-56 44-64 600 tube
3x24MONOe1.1200i 1000-1200 46-60 52-66 600
3x36MONOe1.95i 25-95 20-32 30-44 550 Shed
L
3x36MONOe1.240i 70-240 22-38 36-52 550
3x36MONOe1.300i 95-300 24-42 38-54 550
36 kV 3x36MONOe1.400i 185-400 28-46 42-60 650
3x36MONOe1.630i 400-630 32-52 44-66 650 Stress relief
3x36MONOe1.1000i 630-1000 42-60 48-70 650 mastic
17
MONOi AI
APPLICATION
The ‘’MONOi A’’ terminations are a single component solution, for single core
polymeric cables
TECHNICAL FEATURES
The ‘’MONOi A’’ indoor terminations are designed for max system voltages of 42 kV,
for compact switchgears as well as for installations where space is limited.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and red
anti-tracking sealing mastic.
A solderless roll force spring and an earthing braid is included in the kit.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Each “MONOi A” termination kit contains material to allow for 3 phase installation. Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
3x12MONOi1.95Ai 25-95 12-20 20-34 300
3x12MONOi1.240Ai 70-240 16-30 24-40 300
3x12MONOi1.300Ai 95-300 18-32 26-44 300
12 kV 3x12MONOi1.400Ai 185-400 22-36 28-48 350
3x12MONOi1.630Ai 400-630 26-42 36-54 350
3x12MONOi1.1000Ai 630-1000 34-52 42-58 400
3x12MONOi1.1200Ai 1000-1200 44-58 48-64 400
3x24MONOi1.95Ai 25-95 14-26 24-42 350
3x24MONOi1.240Ai 70-240 18-34 30-44 350
Sealing
3x24MONOi1.300Ai 95-300 20-38 32-50 350 mastic
24 kV 3x24MONOi1.400Ai 185-400 25-40 36-52 400
3x24MONOi1.630Ai 400-630 30-46 38-60 400 Mono
tube
3x24MONOi1.1000Ai 630-1000 36-56 44-64 400
3x24MONOi1.1200Ai 1000-1200 46-60 52-66 450
3x36MONOi1.95Ai 25-95 20-32 30-44 450 L
3x36MONOi1.240Ai 70-240 22-38 36-52 450
3x36MONOi1.300Ai 95-300 24-42 38-54 450
36 kV 3x36MONOi1.400Ai 185-400 28-46 42-60 450 Stress relief
mastic
3x36MONOi1.630Ai 400-630 32-52 44-66 500
3x36MONOi1.1000Ai 630-1000 42-60 48-70 500 Sealing
mastic
3x36MONOi1.1200Ai 1000-1200 48-64 54-72 500
3x42MONOi1.95Ai 25-95 20-34 34-50 500
3x42MONOi1.240Ai 70-240 26-42 38-54 500
3x42MONOi1.300Ai 95-300 28-46 40-60 500
42 kV 3x42MONOi1.400Ai 185-400 32-48 42-64 550
3x42MONOi1.630Ai 400-630 34-56 46-68 550
3x42MONOi1.1000Ai 630-1000 44-62 50-74 550
3x42MONOi1.1200Ai 1000-1200 50-66 56-76 550
18
MONOe AI
APPLICATION
The ‘’MONOe A’’ terminations are a single component solution, for single core
polymeric cables.
TECHNICAL FEATURES
The ‘’MONOe A’’ outdoor terminations are designed for max system voltages
of 42 kV.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and
red anti-tracking sealing mastic. Anti-tracking rain sheds are supplied to withstand
outdoor environments.
A solderless roll force spring and an earthing braid is included in the kit.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs. Type tested acc.
Each “MONOe A” termination kit contains material to allow for 3 phase installation Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
3x12MONOe1.95Ai 25-95 12-20 20-34 500
3x12MONOe1.240Ai 70-240 16-30 24-40 500
3x12MONOe1.300Ai 95-300 18-32 26-44 500
12 kV 3x12MONOe1.400Ai 185-400 22-36 28-48 500
3x12MONOe1.630Ai 400-630 26-42 36-54 500
3x12MONOe1.1000Ai 630-1000 34-52 42-58 500
3x12MONOe1.1200Ai 1000-1200 44-58 48-64 500 Sealing
mastic
3x24MONOe1.95Ai 25-95 14-26 24-42 500
3x24MONOe1.240Ai 70-240 18-34 30-44 500
3x24MONOe1.300Ai 95-300 20-38 32-50 500
24 kV 3x24MONOe1.400Ai 185-400 25-40 36-52 500 Mono
tube
3x24MONOe1.630Ai 400-630 30-46 38-60 600
3x24MONOe1.1000Ai 630-1000 36-56 44-64 600 L Shed
3x24MONOe1.1200Ai 1000-1200 46-60 52-66 600
3x36MONOe1.95Ai 25-95 20-32 30-44 550
3x36MONOe1.240Ai 70-240 22-38 36-52 550
3x36MONOe1.300Ai 95-300 24-42 38-54 550 Stress relief
36 kV 3x36MONOe1.400Ai 185-400 28-46 42-60 650 mastic
Sealing
3x36MONOe1.630Ai 400-630 32-52 44-66 650 mastic
3x36MONOe1.1000Ai 630-1000 42-60 48-70 650
3x36MONOe1.1200Ai 1000-1200 48-64 54-72 650
3x42MONOe1.95Ai 25-95 20-34 34-50 650
3x42MONOe1.240Ai 70-240 26-42 38-54 650
3x42MONOe1.300Ai 95-300 28-46 40-60 650
42 kV 3x42MONOe1.400Ai 185-400 32-48 42-64 650
3x42MONOe1.630Ai 400-630 34-56 46-68 750
3x42MONOe1.1000Ai 630-1000 44-62 50-74 750
3x42MONOe1.1200Ai 1000-1200 50-66 56-76 750
19
MONOi FCi
APPLICATION
The ‘’MONOi FCi’’ terminations are a single component solution, for single core
polymeric cables.
TECHNICAL FEATURES
The ‘’MONOi FCi’’ indoor terminations are designed for max system voltages
of 42 kV, for compact switchgears as well as for installations where space is limited.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and red
anti-tracking sealing mastic.
A cheese-rasp + earthing braid is included in the kit.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Each “MONOi FCi” termination kit contains material to allow for 3 phase installation.
WSK 2.0 type with “T” braid and roll force spring instead of cheese rasp available
upon request.
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
3x24MONOi1.95FCi 25-95 14-26 24-42 350
3x24MONOi1.240FCi 70-240 18-34 30-44 350
3x24MONOi1.300FCi 95-300 20-38 32-50 350
24 kV 3x24MONOi1.400FCi 185-400 25-40 36-52 400
3x24MONOi1.630FCi 400-630 30-46 38-60 400
3x24MONOi1.1000FCi 630-1000 36-56 44-64 400
3x24MONOi1.1200FCi 1000-1200 46-60 52-66 450
3x36MONOi1.95FCi 25-95 20-32 30-44 450 Sealing
mastic
3x36MONOi1.240FCi 70-240 22-38 36-52 450
3x36MONOi1.300FCi 95-300 24-42 38-54 450
36 kV 3x36MONOi1.400FCi 185-400 28-46 42-60 450 Mono
3x36MONOi1.630FCi 400-630 32-52 44-66 500 tube
20
MONOe FCi
APPLICATION
The ‘’MONOe FCi’’ terminations are a single component solution, for single core
polymeric cables.
TECHNICAL FEATURES
The ‘’MONOe FCi’’ outdoor terminations are designed for max system voltages
of 42 kV.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and
red anti-tracking sealing mastic. Anti-tracking rain sheds are supplied to withstand
outdoor environments.
A cheese-rasp + earthing braid is included in the kit.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Each “MONOe FCi” termination kit contains material to allow for 3 phase installation.
WSK 2.0 type with “T” braid and roll force spring instead of cheese rasp available
upon request.
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
3x24MONOe1.95FCi 25-95 14-26 24-42 500
3x24MONOe1.240FCi 70-240 18-34 30-44 500
3x24MONOe1.300FCi 95-300 20-38 32-50 500
24 kV 3x24MONOe1.400FCi 185-400 25-40 36-52 500
3x24MONOe1.630FCi 400-630 30-46 38-60 600
3x24MONOe1.1000FCi 630-1000 36-56 44-64 600 Sealing
mastic
3x24MONOe1.1200FCi 1000-1200 46-60 52-66 600
3x36MONOe1.95FCi 25-95 20-32 30-44 550 Mono
3x36MONOe1.240FCi 70-240 22-38 36-52 550 tube
21
MONOi3 W
APPLICATION
The ‘’MONOi3 W” indoor terminations are designed for armored three core polymeric
cables with Cu wire or tape screen.
TECHNICAL FEATURES
The ‘’MONOi3 W’’ indoor terminations are designed for max system voltages
of 42 kV, for compact switchgears as well as for installations where space is limited.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and red
anti-tracking sealing mastic.
Red anti-tracking break-out and red anti-tracking tubes “GT2” with adjustable length
“D” are included in the kit.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs
Right angle or straight heat-shrinkable boots are available on request.
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
12MONOi3.95W 25-95 12-20 38-56 500 L*
12MONOi3.240W 70-240 16-30 46-72 500
12 kV
12MONOi3.300W 95-300 18-32 48-82 600
12MONOi3.400W 185-400 22-36 58-84 600
24MONOi3.95W 25-95 14-26 40-62 650
24MONOi3.240W 70-240 18-34 48-76 650
24 kV
24MONOi3.300W 95-300 20-38 52-84 650
24MONOi3.400W 185-400 25-40 62-90 650
36MONOi3.95W 25-95 20-32 58-76 950
36MONOi3.240W 70-240 22-38 64-90 950
36 kV
36MONOi3.300W 95-300 24-42 68-94 950 L*
36MONOi3.400W 185-400 28-46 78-102 950
42MONOi3.95W 25-95 20-34 60-90 1000
42MONOi3.240W 70-240 26-42 66-110 1000
42 kV L
42MONOi3.300W 95-300 28-46 70-120 1000
42MONOi3.400W 185-400 32-48 80-130 1000
D
22
MONOe3 W
APPLICATION
The ‘’MONOe3 W” outdoor terminations are designed for armored three core
polymeric cables with Cu wire or tape screen.
TECHNICAL FEATURES
The ‘’MONOe3 W’’ outdoor terminations are designed for max system voltages
of 42 kV.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and red
anti-tracking sealing mastic.
Red anti-tracking break-out and red anti-tracking tubes “GT2” with adjustable length
“D” are included in the kit.
Anti-tracking rain sheds are supplied to withstand outdoor enviroments.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm) L*
12MONOe3.95W 25-95 12-20 38-56 690
12MONOe3.240W 70-240 16-30 46-72 690
12 kV
12MONOe3.300W 95-300 18-32 48-82 690
12MONOe3.400W 185-400 22-36 58-84 690
24MONOe3.95W 25-95 14-26 40-62 800
24MONOe3.240W 70-240 18-34 48-76 800
24 kV
24MONOe3.300W 95-300 20-38 52-84 800
24MONOe3.400W 185-400 25-40 62-90 800
36MONOe3.95W 25-95 20-32 58-76 1000
36MONOe3.240W 70-240 22-38 64-90 1000 L*
36 kV
36MONOe3.300W 95-300 24-42 68-94 1000
36MONOe3.400W 185-400 28-46 78-102 1000
42MONOe3.95W 25-95 20-34 60-90 1100 L
42MONOe3.240W 70-240 26-42 66-110 1100
42 kV
42MONOe3.300W 95-300 28-46 70-120 1100
D
42MONOe3.400W 185-400 32-48 80-130 1100
23
MONOi3 CW
APPLICATION
The ‘’MONOi3 CW” indoor terminations are designed for not armored three core
polymeric cables with common Cu wire screen.
TECHNICAL FEATURES
The ‘’MONOi3 CW’’ indoor terminations are designed for max system voltages
of 42 kV, for compact switchgears as well as for installations where space is limited.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube
and red anti-tracking sealing mastic.
Red anti-tracking break-out and red anti-tracking tubes “GT2” with adjustable length
“D” are included in the kit.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Right angle or straight heat-shrinkable boots are available on request.
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
12MONOi3.95CW 25-95 12-20 38-56 500
12MONOi3.240CW 70-240 16-30 46-72 500 L*
12 kV
12MONOi3.300CW 95-300 18-32 48-82 600
12MONOi3.400CW 185-400 22-36 58-84 600
24MONOi3.95CW 25-95 14-26 40-62 650
24MONOi3.240CW 70-240 18-34 48-76 650
24 kV
24MONOi3.300CW 95-300 20-38 52-84 650
24MONOi3.400CW 185-400 25-40 62-90 650
36MONOi3.95CW 25-95 20-32 58-76 950
36MONOi3.240CW 70-240 22-38 64-90 950
36 kV
36MONOi3.300CW 95-300 24-42 68-94 950
L*
36MONOi3.400CW 185-400 28-46 78-102 950
42MONOi3.95CW 25-95 20-34 60-90 1000
42MONOi3.240CW 70-240 26-42 66-110 1000
42 kV L
42MONOi3.300CW 95-300 28-46 70-120 1000
42MONOi3.400CW 185-400 32-48 80-130 1000
D
24
MONOe3 CW
APPLICATION
The ‘’MONOe3 CW” outdoor terminations are designed for not armored three core
polymeric cables with common Cu wire screen.
TECHNICAL FEATURES
The ‘’MONOe3 CW’’ outdoor terminations are designed for max system
voltages of 42 kV.
Easy, quick to install, reducing installation time and errors.
The kit consists of a stress control mastic pad, a co extruded dual wall tube and red
anti-tracking sealing mastic.
Red anti-tracking break-out and red anti-tracking tubes “GT2” with adjustable length
“D” are included in the kit.
Anti-tracking rain sheds are supplied to withstand outdoor enviroments.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L min
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
12MONOe3.95CW 25-95 12-20 38-56 690
12MONOe3.240CW 70-240 16-30 46-72 690
L*
12 kV
12MONOe3.300CW 95-300 18-32 48-82 690
12MONOe3.400CW 185-400 22-36 58-84 690
24MONOe3.95CW 25-95 14-26 40-62 800
24MONOe3.240CW 70-240 18-34 48-76 800
24 kV
24MONOe3.300CW 95-300 20-38 52-84 800
24MONOe3.400CW 185-400 25-40 62-90 800
36MONOe3.95CW 25-95 20-32 58-76 1000
36MONOe3.240CW 70-240 22-38 64-90 1000
36 kV L*
36MONOe3.300CW 95-300 24-42 68-94 1000
36MONOe3.400CW 185-400 28-46 78-102 1000
42MONOe3.95CW 25-95 20-34 60-90 1100
L
42MONOe3.240CW 70-240 26-42 66-110 1100
42 kV
42MONOe3.300CW 95-300 28-46 70-120 1100
42MONOe3.400CW 185-400 32-48 80-130 1100 D
25
TK NOT ARM
APPLICATION
Designed to accommodate not armored, three core cables to 3 single core
terminations.
TECHNICAL FEATURES
The TK A/1 kit consists of an anti-tracking breakout for the cable crotch area,
1 pc of “GT2” anti-tracking tube to cover the cores.
The red anti-tracking tubes “GT2” in the kit can be selected from 3 different spool
lengths to be adjusted, by cutting in 3 parts, according to the required tail length “D”
(800,1200,1600 mm).
TK1A-2M/1 25-95 2
TK2A-2M/1 70-240 2
12 kV
TK3A-2M/1 95-300 2
TK4A-2M/1 185-400 2
TK1A-3M/1 25-95 3
TK2A-3M/1 70-240 3
17/24 kV
TK3A-3M/1 95-300 3
TK4A-3M/1 185-400 3
TK1A-5M/1 25-95 5
TK2A-5M/1 70-240 5
D
36/42/52 kV
TK3A-5M/1 95-300 5
TK4A-5M/1 185-400 5
26
TK ARM
APPLICATION
Designed to accommodate armored, three core cables to 3 single core terminations.
TECHNICAL FEATURES
The TK A kit consists of an anti-tracking breakout for the cable crotch area,
1 pc of “GT2” anti-tracking tube to cover the cores, plus an earthing braid kit
(consisting of a worm clip, tinned copper braid with water blocking and
a connection point). A sealing mastic is provided to ensure water/moisture
penetration.
The red anti-tracking tubes “GT2” in the kit can be selected from 3 different spool
lengths to be adjusted, by cutting in 3 parts, according to the required tail length
(800,1200,1600 mm).
TK1A-2M 25-95 2
TK2A-2M 70-240 2
12 kV
TK3A-2M 95-300 2
TK4A-2M 185-400 2
TK1A-3M 25-95 3
TK2A-3M 70-240 3
17/24 kV
TK3A-3M 95-300 3
TK4A-3M 185-400 3
TK1A-5M 25-95 5
TK2A-5M 70-240 5 D
36/42/52 kV
TK3A-5M 95-300 5
TK4A-5M 185-400 5
27
TTGI1 Z
APPLICATION
“TTGI1 Zi” heat-shrink medium voltage indoor terminations for single core polymeric
insulated cables with either Cu wire screen or Cu tape screen with aluminium wire/
tape armor.
TECHNICAL FEATURES
The “TTGI Zi” indoor terminations utilize stress control tubing with stress grading
mastic to control the electric field. The cut of the semi-conductive screen on the
termination is covered by stress control mastic strip, acting as both stress control and
void filler. The stress control tubing completes the control of the electric field.
The lug barrel is covered with anti-tracking mastic to create complete
environmental seal.
Anti-tracking mastic is also used to seal the earth/armor connection.
“GT2” anti-tracking tube completes the termination and covers armor connection.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
DOI DOE
Um Section L
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
28
TTGE1 Z
APPLICATION
“TTGE1 Zi” heat-shrink medium voltage outdoor terminations for single core polymeric
insulated cables with either Cu wire screen or Cu tape screen with aluminium wire/
tape armor.
TECHNICAL FEATURES
The “TTGE Zi” indoor terminations utilize stress control tubing with stress grading
mastic to control the electric field. The cut of the semi-conductive screen on the
termination is covered by stress control mastic strip, acting as both stress control
and void filler. The stress control tubing completes the control of the electric field.
The lug barrel is covered with anti-tracking mastic to create complete
environmental seal.
Anti-tracking mastic is also used to seal the earth/armor connection.
“GT2” anti-tracking tube completes the termination and covers armor connection.
Rain sheds are included in the kit.
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
Type tested acc.
Cenelec HD 629.1
IEC 60502-4
DOI DOE
Um Section L
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
29
52TTGI1
APPLICATION
The “52TTGI1” terminations are designed for single core polymeric cables.
TECHNICAL FEATURES
A stress control patch is applied at the screen cut of the termination and helps
to control the field together with stress control tubing.
Semiconductive tubing creates a bridge for leakage currents placed onto and
covering the screen wires or earth braid.
Another layer of stress control mastic covers the top end
of the semiconductive tubing.
Red anti-tracking mastic is wrapped onto the top end of the tubing.
The lug and cable outer sheath is sealed with anti-tracking mastic.
Heavy wall anti-tracking tube and anti-tracking rain sheds complete the termination.
A solderless roll force spring and an earthing braid are included in the kit (type Ai).
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
For cable with Al foil screen please ask to our sales representative.
Meet the requirements.
IEC 60840
DOI DOE
Um Section L
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
52TTGI1.95i 25-95 26-32 30-44 900
Sealing
mastic
Antitracking
tube
L
Shed
Stress control
tube
Sealing
mastic
30
52TTGE1
APPLICATION
The “52TTGE1” terminations are designed for single core polymeric cables.
TECHNICAL FEATURES
A stress control patch is applied at the screen cut of the termination and helps
to control the field together with stress control tubing.
Semiconductive tubing creates a bridge for leakage currents placed onto
and covering the screen wires or earth braid.
Another layer of stress control mastic covers the top end
of the semiconductive tubing.
Red anti-tracking mastic is wrapped onto the top end of the tubing.
The lug and cable outer sheath is sealed with anti-tracking mastic.
Heavy wall anti-tracking tube and anti-tracking rain sheds complete the termination.
A solderless roll force spring and an earthing braid are included in the kit (type Ai).
The design accommodates various conductor lugs.
MC types are supplied with “GPH” mechanical conductor lugs.
For cable with Al foil screen please ask to our sales representative.
Meet the requirements.
IEC 60840
DOI DOE
Um Section L
Type insulation outer sheath
(Kv) (mm²) (mm)
(mm) (mm)
52TTGE1.95i 25-95 26-32 30-44 900
Antitracking
tube
Shed
Stress control
tube
Sealing
mastic
31
HEAT SHRINK MEDIUM VOLTAGE
STRAIGHT/TRANSITION JOINTS FOR SINGLE/THREE
CORE CABLES UP TO Umax 42 kV
The new range of Nexans JTS heat shrink medium-voltage straight joints is
compatible with single or three-core polymeric cables with copper wire screen,
copper tape screen or with Aluminum tape screen.
For 12 to 24kV applications, the Nexans JTS 17/24 heat shrink joint is the
new high performance, compact and easy-to-install joint: a single body with all
electrical functions integrated!
The JTS 17/24 is using the Nexans “TRIPLE GT125”, an integrated stress
control field, insulating and conductive tube, which can support voltage classes
up to 24 kV up to 400 mm².
A double layer pad with conductive rubber inside and HK orange mastic
outside ensure a Faraday cage and smooth the effect of the electrical field in the
connector area.
The electrical continuity of the screen is ensured by a tinned copper stocking with
roll constant force springs in case of copper wire/tape screen (CS type).
A standard tinned copper tape plus an earthing ferrule in case of only copper
wire screen (W type).
Finally, the outer sheath is restored with heavy wall adhesive lined tubing
or, in case of limited space, with a wrap-around sleeve
with or without Al foil.
32
For 12 to 24 kV applications from 400mm² up to 1200 mm² and
36 to 42 kV applications, the Nexans JTS 36/42 heat shrink joint is also
12/17 – 24 kV up to 400mm2
a high performance, compact and easy-to-install joint: GT 125
The JTS 36/42 is using an integrated co extruded “stress control field 12/17 – 24 kV 500 up to 1200mm2
+ insulating” (DUAL GT12) tube nested in a co extruded “insulating 36/42 kV
The new Nexans JTS/JTM Heat Shrink joint - Features & Benefits
- Reduced installation time / training time, with standard cable preparation work
- Simplified stress control with 2-layer plate
=> no need to conform the mastic before shrinking the tube
- Design adapted for all type and brands of mechanical / crimping connectors B
INSTALLATION
Each kit contains easy guided mounting instructions with installation steps made
by 3D pictures.
PRODUCT RANGE
The product line is designed for polymeric cables from 16 to 1200 mm² and up
to Umax 42 kV with different screen type (CWS-CTS, Al Foil).
The JTS are fully type tested in accordance with IEC 60502-4
and the Cenelec Hd 629.1 standards.
33
34
LOW VOLTAGE JOINTS
35
1GLT GR
APPLICATION
The 1GLT 4 GR 1 - 7 low voltage heat-shrink straight joint kits are designed for plastic
insulated cables in full accordance with DIN47640.
The kits are designed to accommodate the DIN specific mechanical shear bolt
connectors (GPH D-Series), and are fully type tested acc. to EN50393.
GT 4 heavy wall tubing with adhesive is used to create the joint.
The tube is used to insulate the core/connector as well as rebuilding the outer jacket.
Meets specifications:
KIT CONTENTS EN50393
- 4 x GT 4 heavy wall tubing with adhesive for core insulation Meets specifications:
- 4 x GPH D type mechanical shear bolt connectors (only “C” series) DIN47640
- 1 x GT 4 heavy wall tubing with adhesive to rebuild the outer sheath
Application range L
Type
(mm²) (mm)
Application range L
Type
(mm²) (mm)
36
1GLT KI
APPLICATION
The 1GLT KI heat-shrink low voltage straight through joints, are designed to connect
armored cables with STA or SWA having PVC, PE, XLPE or EPR insulation.
The joints are designed to accommodate both crimp or mechanical ferrules.
KIT CONTENTS
- Inner core/connector insulating tubes with adhesive
- Canister & earthing kit (depending on cable)
Meets specifications:
- Outer protective tube(s) with adhesive EN50393
Application range L
Type
(mm²) (mm)
37
38
MEDIUM VOLTAGE JOINTS
17/24JTS1 W (CS) Heat-shrink MV straight joints for unarmored single core polymeric cables with Cu wire or tape screen P. 40
36/42JTS1 W (CS) Heat-shrink MV straight joints for unarmored single core polymeric cables with Cu wire or tape screen P. 41
24JTS1 FC Heat-shrink MV straight joints for unarmored single core polymeric cables with Al tape screen P. 42
36/42JTS1 FC Heat-shrink MV straight joints for unarmored single core polymeric cables with Al tape screen P. 43
17/24JTS1 KZ Heat-shrink MV straight joints for armored single core polymeric cables with Cu wire or tape screen P. 44
36/42JTS1 KZ Heat-shrink MV straight joints for armored single core polymeric cables with Cu wire or tape screen P. 45
JTSR1 W (CS) Heat-shrink MV repair joints for unarmored single core polymeric cables with Cu wire or tape screen P. 46
GTSIS1 Heat-shrink MV shield break straight joints for unarmored single core polymeric cables with Cu wire or tape P. 47
screen
17/24JTS3 CW Heat-shrink MV straight joints for unarmored three core polymeric cables with Cu wire screen P. 48
36/42JTS3 CW Heat-shrink MV straight joints for unarmored three core polymeric cables with Cu wire screen P. 49
17/24JTS3 K Heat-shrink MV straight joints for armored three core polymeric cables with Cu wire or tape screen P. 50
36/42JTS3 K Heat-shrink MV straight joints for armored three core polymeric cables with Cu wire or tape screen P. 51
JTS3.1 CW Heat-shrink MV transition joints between unarmored three core polymeric cables with Cu wire screen P. 52
and n°3 single core cables with polymeric insulation and Cu wire screen
JTM1 W (CS) Heat-shrink MV transition joints between single core polymeric cables with Cu wire or tape screen P. 53
and single core paper insulated PILC cables
JTM3 W Heat-shrink MV transition joints between three core polymeric cables with Cu wire screen and three core P. 54
paper insulated PILC (1 Lead) armored/unarmored cables
JTM3.1 W Heat-shrink MV transition joints between armored/unarmored three core paper insulated cables PILC P. 55
(1 lead) and n°3 single core cables with polymeric insulation and Cu wire screen
JTM3 K Heat-shrink MV transition joints between three core polymeric cables with Cu wire and tape screen P. 56
armored and three core paper insulated PILC (1 lead) armored cables
JTM3 KB Heat-shrink MV transition joints between three core polymeric cables with Cu wire and tape screen armored P. 57
and three core paper insulated PILC (HSL) armored cables
3. JTM1 W(CS) Heat-shrink MV transition joints between single core polymeric cables with Cu wire or tape screen and three P. 58
core paper insulated PILC cables (HSL)
52GTS.1 Heat-shrink straight joints for unarmored single core polymeric cables with Cu wire screen P. 59
39
17/24JTS1 W (CS)
APPLICATION
JTS1 heat-shrink straight joints are designed for unarmored, plastic insulated cables
with Cu wire or Cu tape screen, to accommodate either crimped or mechanical
connectors.
TECHNICAL FEATURES
JTS is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating
and conductive tube, which can withstand
high voltage applications up to 24kV and up to 400 mm² .
Type tested acc.
From 400 up to 1200 mm² a double dual layer tube is used. Cenelec HD 629.1
A double layer pad with conductive rubber inside and HK orange mastic outside IEC 60502-4
ensure a Faraday cage and smooth the effect of the electrical field in the connector
area.
The electrical continuity of the screen (both Cu tape or Cu wire) is ensured by a
tinned copper stocking with roll force springs (CS type) or for Cu wire with a standard
tinned copper tape plus an earthing ferrule (W type).
MC types are supplied with GPH® mechanical connectors.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
17JTS1.95W-(CS) 25-95 600 12-24 20-38
17JTS1.240W-(CS) 70-240 600 16-32 24-44
17JTS1.300W-(CS) 95-300 750 18-34 26-48
12/17,5 17JTS1.400W-(CS) 185-400 750 22-38 30-52
17JTS1.630W-(CS) 400-630 750 (1000-CS) 26-44 36-58
17JTS1.1000W-(CS) 630-1000 1000 34-52 42-68
17JTS1.1200W-(CS) 800-1200 1000 38-58 48-72
24JTS1.95W-(CS) 25-95 600 18-28 24-40
24JTS1.240W-(CS) 70-240 600 20-36 26-48
24JTS1.300W-(CS) 95-300 750 22-38 28-52
24 24JTS1.400W-(CS) 185-400 750 24-40 32-54
24JTS1.630W-(CS) 400-630 750 (1000-CS) 30-46 38-60
24JTS1.1000W-(CS) 630-1000 1000 36-56 44-70
24JTS1.1200W-(CS) 800-1200 1000 40-60 52-74
For cables with CS type is suitable W type is supplied For other cable Please contact our Various earth Design Various earth for
additional vapor both cables with with standard types please sales office when connection design accommodates connection kits
screen please copper wire / metallic tape design contact our sales inquiring joints for solutions exist for various connector/ are available for
contact our sales copper tape and earth ferrule office. same type cables armoring. For exact ferrule types. screen connection.
office. screen. for copper wire with different cross details contact our For exact details
screen cable. sections. sales office. contact our sales
office.
40
36/42JTS1 W (CS)
APPLICATION
36-42JTS1 heat-shrink straight joints are designed for unarmored, plastic insulated
cables with Cu wire or Cu tape screen, to accommodate either crimped or mechanical
connectors.
TECHNICAL FEATURES
36-42JTS is the NEW high performance, compact and easy to install joint.
Double bodies with all the electrical functions integrated!
The Nexans 36/42JTS is an integrated coextruded “stress control field + insulating”
tube nested in a coextruded “insulating + conductive” tube which can withstand high
voltage applications up to 42kV.
Type tested acc.
A double layer pad with conductive rubber inside and HK orange mastic outside Cenelec HD 629.1
ensure IEC 60502-4
a Faraday cage and smooth the effect of the electrical field in the connector area.
The electrical continuity of the screen (both Cu tape or Cu wire) is ensured by a
tinned copper stocking with roll force springs (CS type) or for Cu wire with a standard
tinned copper tape plus an earthing ferrule (W type).
MC types are supplied with GPH® mechanical connectors.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
36JTS1.95W-(CS) 25-95 750 20-32 30-44
36JTS1.240W-(CS) 70-240 750 22-38 34-52
36JTS1.300W-(CS) 95-300 750 24-42 34-54
36 36JTS1.400W-(CS) 185-400 1000 28-46 38-60
36JTS1.630W-(CS) 400-630 1000 32-52 44-66
36JTS1.1000W-(CS) 630-1000 1000 42-60 48-76
36JTS1.1200W-(CS) 800-1200 1000 48-64 54-78
42JTS1.95W-(CS) 25-95 750 20-34 34-50
42JTS1.240W-(CS) 70-240 750 26-42 38-54
42JTS1.300W-(CS) 95-300 750 28-46 40-60
42 42JTS1.400W-(CS) 185-400 1000 32-48 42-64
42JTS1.630W-(CS) 400-630 1000 34-56 46-68
42JTS1.1000W-(CS) 630-1000 1000 44-62 50-78
42JTS1.1200W-(CS) 800-1200 1000 50-66 56-80
For cables with CS type is suitable W type is supplied For other cable Please contact our Various earth Design Various earth for
additional vapor both cables with with standard types please sales office when connection design accommodates connection kits are
screen please copper wire / metallic tape design contact our sales inquiring joints for solutions exist for various connector/ available for screen
contact our sales copper tape and earth ferrule office. same type cables armoring. For exact ferrule types. connection. For exact
office. screen. for copper wire with different cross details contact our details contact our
screen cable. sections. sales office. sales office.
41
24JTS1 FC
APPLICATION
24JTS1 FC heat-shrink straight joints are designed for unarmored, plastic insulated
cables
with Al tape screen, to accommodate either crimped or mechanical connectors.
TECHNICAL FEATURES
24JTS1 FC is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating
and conductive tube, which can withstand high voltage applications up to 24kV
and up to 400mm².
Type tested acc.
From 400 up to 1200 mm² a double dual layer tube is used. Cenelec HD 629.1
A double layer pad with conductive rubber inside and HK orange mastic outside IEC 60502-4
ensure a Faraday cage and smooth the effect of the electrical field in the connector
area.
The electrical continuity of the screen is ensured by a tinned copper stocking with
roll force springs, the contact from the cable Al foil and the stocking is made with
“cheese grader
+ soldered earthing braids”.
WSK2.0 types are available for the same screen cable without cheese grader
DOI DOE
Um Section range
Type L (mm) insulation outer sheath
kV (mm²)
(mm) (mm)
24JTS1.95FC 25-95 600 18-28 24-40
24JTS1.240FC 70-240 600 20-36 26-48
24JTS1.300FC 95-300 750 22-38 28-52
24 24JTS1.400FC 185-400 750 24-40 32-54
24JTS1.630FC 400-630 1000 30-46 38-60
24JTS1.1000FC 630-1000 1000 36-56 44-70
24JTS1.1200FC 800-1200 1000 40-60 52-74
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
42
36/42JTS1 FC
APPLICATION
36/42JTS1 FC heat-shrink straight joints are designed for unarmored, plastic
insulated cables with Al tape screen, to accommodate either crimped or mechanical
connectors.
TECHNICAL FEATURES
36/42 JTS1 FC is the NEW high performance, compact and easy to install joint.
The Nexans 36/42JTS FC is an integrated coextruded “stress control field +
insulating” tube nested in a coextruded “insulating + conductive” tube which can
withstand high voltage applications up to 42kV.
A double layer pad with conductive rubber inside and HK orange mastic Type tested acc.
outside ensure a Faraday cage and smooth the effect of the electrical field in the Cenelec HD 629.1
connector area. IEC 60502-4
The electrical continuity of the screen is ensured by a tinned copper stocking with
roll force springs, the contact from the cable Al foil and the stocking is made with
“cheese grader + soldered earthing braids”.
WSK2.0 types are available for the same screen cable without cheese grader
earthing system.(Tinned copper stocking and roll force springs)
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
36JTS1.95FC 25-95 750 20-32 30-44
36JTS1.240FC 70-240 750 22-38 34-52
36JTS1.300FC 95-300 750 24-42 34-54
36 36JTS1.400FC 185-400 1000 28-46 38-60
36JTS1.630FC 400-630 1000 32-52 44-66
36JTS1.1000FC 630-1000 1000 42-60 48-76
36JTS1.1200FC 800-1200 1000 48-64 54-78
42JTS1.95FC 25-95 750 20-34 34-50
42JTS1.240FC 70-240 750 26-42 38-54
42JTS1.300FC 95-300 750 28-46 40-60
42 42JTS1.400FC 185-400 1000 32-48 42-64
42JTS1.630FC 400-630 1000 34-56 46-68
42JTS1.1000FC 630-1000 1000 44-62 50-78
42JTS1.1200FC 800-1200 1000 50-66 56-80
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
43
17/24JTS1 KZ
APPLICATION
17/24JTS1 KZ heat-shrink straight joints are designed for armored, plastic insulated
cables with Cu wire or Cu tape screen Armored (AWA/ATA), to accommodate either
crimped or mechanical connectors.
TECHNICAL FEATURES
17/24JTS KZ is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating and
conductive tube, which can withstand high voltage applications up to 24kV and up to
400 mm² .
Type tested acc.
From 400 up to 1200 mm² a double dual layer tube is used. Cenelec HD 629.1
A double layer pad with conductive rubber inside and HK orange mastic outside IEC 60502-4
ensure
a Faraday cage and smooth the effect of the electrical field in the connector area.
The electrical continuity of the screen (both Cu tape or Cu wire) is ensured with a
standard tinned copper tape plus an earthing ferrule or braid.
Armor mechanical protection and electrical continuity is achieved by using a wrap-
around aluminum canister.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
17JTS1.95KZ 25-95 1000 12-24 24-44
17JTS1.240KZ 70-240 1000 16-32 26-50
17JTS1.300KZ 95-300 1000 18-34 28-54
12/17,5 17JTS1.400KZ 185-400 1000 22-38 30-58
17JTS1.630KZ 400-630 1000 26-44 38-64
17JTS1.1000KZ 630-1000 1500 34-52 44-78
17JTS1.1200KZ 800-1200 1500 38-58 50-88
24JTS1.95KZ 25-95 1000 18-28 26-52
24JTS1.240KZ 70-240 1000 20-36 28-56
24JTS1.300KZ 95-300 1000 22-38 30-62
24 24JTS1.400KZ 185-400 1000 24-40 38-66
24JTS1.630KZ 400-630 1000 30-46 44-78
24JTS1.1000KZ 630-1000 1500 36-56 48-88
24JTS1.1200KZ 800-1200 1500 40-60 52-98
JTS1 KZ type is For other cable Please contact our Various earth Design Various earth for
suitable both cables types please sales office when connection design accommodates connection kits
with copper wire / contact our sales inquiring joints for solutions exist for various connector/ are available for
copper tape office. same type cables armoring. For exact ferrule types. screen connection.
screen. with different cross details contact our For exact details
sections. sales office. contact our sales
office.
44
36/42JTS1 KZ
APPLICATION
36/42JTS1 KZ heat-shrink straight joints are designed for armored, plastic insulated
cables with Cu wire or Cu tape screen Armored (AWA/ATA), to accommodate either
crimped or mechanical connectors.
TECHNICAL FEATURES
36/42JTS KZ is the NEW high performance, compact and easy to install joint.
Double bodies with all the electrical functions integrated.
The Nexans 36/42JTS KZ is an integrated coextruded “stress control field +
insulating” tube nested in a coextruded “insulating + conductive” tube which can
withstand high voltage applications up to 42kV.
Type tested acc.
A double layer pad with conductive rubber inside and HK orange mastic outside Cenelec HD 629.1
ensure IEC 60502-4
a Faraday cage and smooth the effect of the electrical field in the connector area.
The electrical continuity of the screen (both Cu tape or Cu wire) is ensured with a
standard tinned copper tape plus an earthing ferrule or braid.
Armor mechanical protection and electrical continuity is achieved by using a wrap-
around aluminum canister.
MC types are supplied with GPH® mechanical connectors.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
36JTS1.95KZ 25-95 1000 20-32 34-54
36JTS1.240KZ 70-240 1000 22-38 38-62
36JTS1.300KZ 95-300 1000 24-42 42-64
36 36JTS1.400KZ 185-400 1500 28-46 44-70
36JTS1.630KZ 400-630 1500 32-52 48-82
36JTS1.1000KZ 630-1000 1500 42-60 52-92
36JTS1.1200KZ 800-1200 1500 48-64 56-102
42JTS1.95KZ 25-95 1000 20-34 36-56
42JTS1.240KZ 70-240 1000 26-42 40-68
42JTS1.300KZ 95-300 1000 28-46 42-72
42 42JTS1.400KZ 185-400 1500 32-48 46-76
42JTS1.630KZ 400-630 1500 34-56 50-84
42JTS1.1000KZ 630-1000 1500 44-62 56-96
42JTS1.1200KZ 800-1200 1500 50-66 58-108
JTS1 KZ type is For other cable Please contact our Various earth Design Various earth for
suitable both cables types please sales office when connection design accommodates connection kits are
with copper wire / contact our sales inquiring joints for solutions exist for various connector/ available for screen
copper tape office. same type cables armoring. For exact ferrule types. connection. For
screen. with different cross details contact our exact details contact
sections. sales office. our sales office.
45
JTSR1 W (CS)
APPLICATION
JTSR1 heat-shrink repair joints are designed for unarmored, plastic insulated cables
with Cu wire or Cu/Al tape screen, to be used to fix MV cables in which a di-
electrical/mechanical damage occurred.
TECHNICAL FEATURES
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating
and conductive tube, which can withstand high voltage applications up to 24kV and Type tested acc.
400 mm² . Cenelec HD 629.1
From 400 up to 630 mm² and 36/42 kV a double dual layer tube is used. IEC 60502-4
The joints JTSR are supplied with GPH® mechanical repair connectors (L = 440 mm).
JTSR1 W (CS) type for CWS/CTS cables.
JTSR1 FC type for Al foil screen cables.
The outer sheath is restored with heavy wall adhesive lined tubing.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
24JTSR1.240W (CS) 70-240 1300 20-36 26-48
24JTSR1.300W (CS) 95-300 1300 22-38 28-52
24
24JTSR1.400W (CS) 185-400 1300 24-40 32-54
24JTSR1.630W (CS) 400-630 1300 30-46 38-60
36JTSR1.240W (CS) 70-240 1500 22-38 34-52
36JTSR1.300W (CS) 95-300 1500 24-42 34-54
36
36JTSR1.400W (CS) 185-400 1500 28-46 38-60
36JTSR1.630W (CS) 400-630 1500 32-52 44-66
42JTSR1.240W (CS) 70-240 1500 26-42 38-54
42JTSR1.300W (CS) 95-300 1500 28-46 40-60
42
42JTSR1.400W (CS) 185-400 1500 32-48 42-64
42JTSR1.630W (CS) 400-630 1500 34-56 46-68
For cables with CS type is suitable For other cable Please contact our Various earth Various earth for
additional vapor both cables with types please sales office when connection design connection kits
screen please copper wire / contact our sales inquiring joints for solutions exist for are available for
contact our sales copper tape office. same type cables armoring. For exact screen connection.
office. screen. with different cross details contact our For exact details
sections. sales office. contact our sales
office.
46
GTSIS1
APPLICATION
GTSIS1 heat-shrink shield break straight joints are designed for unarmored, plastic
insulated cables with Cu wire or Cu tape screen, to accommodate either crimped
or mechanical connectors.
Nexans GTSIS provide screen interruption in the joint in order to separate
earthing system networks (AC 20kV - impulse 70kV).
It can be supplied with single (GTSIS “L”) or double (GTSIS “L2”) earthing exits
to allow screen transposition and cross bonding. Type tested acc.
Cenelec HD 629.1
TECHNICAL FEATURES IEC 60502-4
Along each section, a standing voltage is induced. In ideal cross-bonding systems
the three section lengths are equal, so that no residual voltage occurs and thus no
screen current flows.
GTSIS W type for CWS cables
GTSIS AW type for CTS cables
GTSIS FC type for Al foil screen cables.
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy wall adhesive lined tubing or in case of
DOI DOE
Um Section range
Type L (mm) insulation outer sheath
kV (mm²)
(mm) (mm)
24GTSIS1.95W 25÷95 750 18-28 24-40
24GTSIS1.240W 70÷240 750 20-36 26-48
24GTSIS1.300W 95÷300 750 22-38 28-52
24
24GTSIS1.400W 185÷400 1000 24-40 32-54
24GTSIS1.630W 400÷630 1000 30-46 38-60
24GTSIS1.1000W 630÷1000 1200 36-56 44-70
36GTSIS1.95W 25÷95 750 20-32 34-44
36GTSIS1.240W 70÷240 1000 22-38 30-52
36GTSIS1.300W 95÷300 1000 24-42 34-54
36
36GTSIS1.400W 185÷400 1000 28-46 38-60
36GTSIS1.630W 400÷630 1200 32-52 44-66
36GTSIS1.1000W 630÷1000 1200 42-60 48-76
42GTSIS1.95W 25÷95 750 20-34 34-50
42GTSIS1.240W 70÷240 1000 26-42 38-54
42GTSIS1.300W 95÷300 1000 28-46 40-60
42
42GTSIS1.400W 185÷400 1000 32-48 42-64
42GTSIS1.630W 400÷630 1200 34-56 46-68
42GTSIS1.1000W 630÷1000 1200 44-62 50-78
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
47
17/24JTS3 CW
APPLICATION
17/24JTS3 CW heat-shrink straight joints are designed for unarmoured, plastic
insulated cables with Cu wire screen, to accommodate either crimped or mechanical
connectors.
TECHNICAL FEATURES
17/24JTS is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating and
conductive tube, which can withstand high voltage applications up to 24kV.
A double layer pad with conductive rubber inside and HK orange mastic outside Type tested acc.
ensure Cenelec HD 629.1
a Faraday cage and smooth the effect of the electrical field in the connector area.
The electrical continuity of the screen is ensured with a standard metallic tape plus
earthing ferrules.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
Vapor barrier protection available upon request (VS).
MC types are supplied with “Nexans GPH” mechanical connectors.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
17JTS3.95CW 25-95 1200 12-24 38-66
17JTS3.240CW 70-240 1200 16-32 46-80
12/17,5
17JTS3.300CW 95-300 1400 18-34 52-86
17JTS3.400CW 185-400 1500 22-38 62-94
24JTS3.95CW 25-95 1200 18-28 46-72
24JTS3.240CW 70-240 1200 20-36 48-88
24
24JTS3.300CW 95-300 1400 22-38 54-92
24JTS3.400CW 185-400 1500 24-40 68-96
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits
contact our sales inquiring joints for solutions exist for various connector/ are available for
office. same type cables armoring. For exact ferrule types. screen connection.
with different cross details contact our For exact details
sections. sales office. contact our sales
office.
48
36/42JTS3 CW
APPLICATION
36/42JTS3 CW heat-shrink straight joints are designed for unarmoured, plastic
insulated cables with Cu wire, to accommodate either crimped or mechanical
connectors.
TECHNICAL FEATURES
36/42JTS is the NEW high performance, compact and easy to install joint.
Double bodies with all the electrical functions integrated!
The Nexans 36/42JTS is an integrated coextruded “stress control field + insulating”
tube nested in a coextruded “insulating + conductive” tube, which can withstand high
voltage
Type tested acc.
applications up to 42kV. Cenelec HD 629.1
A double layer pad with conductive rubber inside and HK orange mastic outside IEC 60502-4
ensure
a Faraday cage and smooth the effect of the electrical field in the connector area.
The electrical continuity of the screen is achieved with a standard metallic tape plus
earthing ferrules.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
Vapor barrier protection available upon request (VS).
MC types are supplied with “Nexans GPH” mechanical connectors.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
36JTS3.95CW 25-95 1600 20-32 64-92
36JTS3.240CW 70-240 1600 22-38 66-112
36
36JTS3.300CW 95-300 1600 24-42 70-118
36JTS3.400CW 185-400 1800 28-46 80-132
42JTS3.95CW 25-95 1600 20-34 64-94
42JTS3.240CW 70-240 1600 26-42 66-114
42
42JTS3.300CW 95-300 1600 28-46 70-122
42JTS3.400CW 185-400 1800 32-48 80-136
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits
contact our sales inquiring joints for solutions exist for various connector/ are available for
office. same type cables armoring. For exact ferrule types. screen connection.
with different cross details contact our For exact details
sections. sales office. contact our sales
office.
49
17/24JTS3 K
APPLICATION
17/24JTS3 K heat-shrink straight joints are designed for armored, plastic insulated
cables with Cu wire or Cu tape screen, to accommodate either crimped or
mechanical connectors.
TECHNICAL FEATURES
17/24JTS is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating and
conductive tube, which can withstand high voltage applications up to 24kV.
A double layer pad with conductive rubber inside and HK orange mastic outside
Type tested acc.
ensure Cenelec HD 629.1
a Faraday cage and smooth the effect of the electrical field in the connector area. IEC 60502-4
Screen connection and armor continuity material whether SWA, STA, DSTA
are included in the kit.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
17JTS3.95K 25-95 1400 12-24 40-74
17JTS3.240K 70-240 1400 16-32 48-92
12/17,5
17JTS3.300K 95-300 1400 18-34 56-98
17JTS3.400K 185-400 1600 22-38 64-102
24JTS3.95K 25-95 1400 18-28 48-82
24JTS3.240K 70-240 1400 20-36 54-98
24
24JTS3.300K 95-300 1400 22-38 58-98
24JTS3.400K 185-400 1600 24-40 66-106
For cables with For other cable Please contact our Various earth Design Various earth for
additional vapor types please sales office when connection design accommodates connection kits
screen please contact our sales inquiring joints for solutions exist for various connector/ are available for
contact our sales office. same type cables armoring. For exact ferrule types. screen connection.
office. with different cross details contact our For exact details
sections. sales office. contact our sales
office.
50
36/42JTS3 K
APPLICATION
36/42JTS3 K heat-shrink straight joints are designed for armored, plastic insulated
cables with Cu wire or Cu tape screen, to accommodate either crimped or
mechanical connectors.
TECHNICAL FEATURES
36/42JTS is the NEW high performance, compact and easy to install joint.
Double bodies with all the electrical functions integrated!
The Nexans 36/42JTS is an integrated coextruded “stress control field + insulating”
tube nested in a coextruded “insulating + conductive” tube, which can withstand high
voltage Type tested acc.
applications up to 42kV. Cenelec HD 629.1
A double layer pad with conductive rubber inside and HK orange mastic outside IEC 60502-4
ensure
a Faraday cage and smooth the effect of the electrical field in the connector area.
Screen connection and armor continuity material whether SWA, STA, DSTA
are included in the kit.
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
DOE
DOI
Um Section range outer
Type L (mm) insulation
kV (mm²) sheath
(mm)
(mm)
36JTS3.95K 25-95 1600 20-32 64-92
36JTS3.240K 70-240 1600 22-38 66-112
36
36JTS3.300K 95-300 1800 24-42 70-118
36JTS3.400K 185-400 2100 28-46 80-132
42JTS3.95K 25-95 1600 20-34 64-94
42JTS3.240K 70-240 1600 26-42 66-114
42
42JTS3.300K 95-300 1800 28-46 70-122
42JTS3.400K 185-400 2100 32-48 80-136
For cables with For other cable Please contact our Various earth Design Various earth for
additional vapor types please sales office when connection design accommodates connection kits are
screen please contact our sales inquiring joints for solutions exist for various connector/ available for screen
contact our sales office. same type cables armoring. For exact ferrule types. connection. For
office. with different cross details contact our exact details contact
sections. sales office. our sales office.
51
JTS3.1 CW
APPLICATION
JTS3.1 CW heat-shrink transition joints are designed to connect three core plastic
insulated cables with 3 single core cables.
TECHNICAL FEATURES
JTS is the NEW high performance, compact and easy to install joint. Type tested acc.
Cenelec HD 629.1
A single body with all the electrical functions integrated!
IEC 60502-4
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating and
conductive tube, which can withstand high voltage applications up to 24kV.
From 36kV a double dual layer tube is used.
A double layer pad with conductive rubber inside and HK orange mastic outside
ensure
a Faraday cage and smooth the effect of the electrical field in the connector area.
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
52
JTM1 W (CS)
APPLICATION
JTM1 heat-shrink transition joints are designed to connect single core plastic
insulated cables with Cu wire or Cu tape screen and paper insulated PILC cables.
TECHNICAL FEATURES
JTM is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating Type tested acc.
and conductive tube, which can withstand high voltage applications up to 24kV Cenelec HD 629.2
and up to 400 mm² . IEC 60055-1
From 36kV and sections from 400 up to 1000 mm² a double dual layer tube is used.
A double layer pad with conductive rubber inside and HK orange mastic
outside ensure a Faraday cage and smooth the effect of the electrical field in the
connector area.
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
DOI DOE
Um Section range
Type L (mm) insulation outer sheath
kV (mm²)
(mm) (mm)
24JTM1.95W-CS 25-95 600 18-28 24-40
24JTM1.240W-CS 70-240 600 20-36 26-48
24JTM1.300W-CS 95-300 750 22-38 28-52
24
24JTM1.400W-CS 185-400 750 24-40 32-54
24JTM1.630W-CS 400-630 1200 30-46 38-60
24JTM1.1000W-CS 630-1000 1200 36-56 44-70
36JTM1.95W-CS 25-95 900 20-32 30-44
36JTM1.240W-CS 70-240 1000 22-38 34-52
36 36JTM1.300W-CS 95-300 1000 24-42 34-56
36JTM1.400W-CS 185-400 1200 28-46 38-60
36JTM1.630W-CS 400-630 1200 32-52 44-66
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
53
JTM3 W
APPLICATION
JTM3 heat-shrink transition joints are designed to connect three core plastic
insulated cables with Cu wire screen and three paper insulated armored PILC
cables.
TECHNICAL FEATURES
JTM3 is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
Type tested acc.
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating Cenelec HD 629.2
and conductive tube, which can withstand high voltage applications up to 24kV IEC 60055-1
and up to 400 mm².
For 36kV a double dual layer tube is used.
A double layer pad with conductive rubber inside and HK orange mastic outside
ensure a Faraday cage and smooth the effect of the electrical field in the connector
area.
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
DOI DOE
Um Section range
Type L (mm) insulation outer sheath
kV (mm²)
(mm) (mm)
17JTM3.95W 25-95 1500 12-24 32-74
17JTM3.240W 70-240 1600 16-32 42-92
12/17,5
17JTM3.300W 95-300 1600 18-34 44-96
17JTM3.400W 185-400 1600 22-38 54-102
24JTM3.95W 25-95 1500 18-28 44-82
24JTM3.240W 70-240 1600 20-36 50-98
24
24JTM3.300W 95-300 1600 22-38 52-106
24JTM3.400W 185-400 1600 24-40 64-116
36JTM3.95W 25-95 1700 20-32 62-96
36JTM3.240W 70-240 1800 22-38 68-120
36
36JTM3.300W 95-300 1800 24-42 72-132
36JTM3.400W 185-400 1800 28-46 84-142
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
54
JTM3.1 W
APPLICATION
JTM3.1 W heat-shrink transition joints are designed to connect three core paper
insulated cables PILC (1 LEAD) with 3 single core cables.
TECHNICAL FEATURES
JTM3.1 is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
Type tested acc.
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating
Cenelec HD 629.2
and conductive tube, which can withstand high voltage applications up to 24kV IEC 60055-1
and up to 400mm².
From 36kV a double dual layer tube is used.
A double layer pad with conductive rubber inside and HK orange mastic
outside ensure a Faraday cage and smooth the effect of the electrical field in the
connector area.
- JTM3.1 W type for CWS cables
- JTM3.1 AW type for CTS cables
- JTM3.1 FC type for Al foil screen cables.
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy wall adhesive lined tubing or in case of
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
55
JTM3 K
APPLICATION
JTM3 K heat-shrink transition joints are designed to connect three core plastic
insulated cables with Cu wire/tape screen armored and three core paper insulated
armored
PILC (1 Lead) cables.
Type tested acc.
TECHNICAL FEATURES Cenelec HD 629.2
JTM3 K is the NEW high performance, compact and easy to install joint. IEC 60055-1
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating
and conductive tube, which can withstand high voltage applications up to 24kV
and up to 400 mm².
For 36kV a double dual layer tube is used.
A double layer pad with conductive rubber inside and HK orange mastic outside
ensure a Faraday cage and smooth the effect of the electrical field in the connector
area.
Screen connection and armor continuity material whether SWA, STA, DSTA
are included in the kit.
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
DOI DOE
Um Section range
Type L (mm) insulation outer sheath
kV (mm²)
(mm) (mm)
17JTM3.95K 25-95 1600 12-24 32-74
17JTM3.240K 70-240 1600 16-32 42-92
12/17,5
17JTM3.300K 95-300 1600 18-34 44-96
17JTM3.400K 185-400 1800 22-38 54-102
24JTM3.95K 25-95 1600 18-28 44-82
24JTM3.240K 70-240 1600 20-36 50-98
24
24JTM3.300K 95-300 1600 22-38 52-106
24JTM3.400K 185-400 1800 24-40 64-116
36JTM3.95K 25-95 1800 20-32 62-96
36JTM3.240K 70-240 1800 22-38 68-120
36
36JTM3.300K 95-300 1800 24-42 72-132
36JTM3.400K 185-400 2100 28-46 84-142
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
56
JTM3 KB
APPLICATION
JTM3 KB heat-shrink transition joints are designed to connect three core plastic
insulated cables with Cu wire/tape screen armored and three core paper insulated
armored
PILC (HSL) cables.
TECHNICAL FEATURES
JTM3 KB is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating
and conductive tube, which can withstand high voltage applications up to 24kV
and up to 400 mm². Type tested acc.
Cenelec HD 629.2
For 36/42kV a double dual layer tube is used.
IEC 60055-1
A double layer pad with conductive rubber inside and HK orange mastic
outside ensure a Faraday cage and smooth the effect of the electrical field in the
connector area.
Screen connection and armor continuity material whether SWA, STA, DSTA
are included in the kit
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
DOI DOE
Um Section range
Type L (mm) insulation outer sheath
kV (mm²)
(mm) (mm)
24JTM3.95KB 25-95 1600 18-28 44-82
24JTM3.240KB 70-240 1600 20-36 50-98
24
24JTM3.300KB 95-300 1600 22-38 52-106
24JTM3.400KB 185-400 1800 24-40 64-116
36JTM3.95KB 25-95 1800 20-32 62-96
36JTM3.240KB 70-240 1800 22-38 68-120
36
36JTM3.300KB 95-300 1800 24-42 72-132
36JTM3.400KB 185-400 2100 28-46 84-142
42JTM3.95KB 25-95 1800 20-34 68-98
42JTM3.240KB 70-240 1800 24-40 74-124
42
42JTM3.300KB 95-300 1800 28-46 78-138
42JTM3.400KB 185-400 2100 32-48 84-152
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
57
3. JTM1 W(CS)
APPLICATION
3. JTM1 heat-shrink transition joints are designed to connect single core plastic
insulated cables with Cu wire or Cu tape screen and paper insulated PILC (HSL)
armored/unarmored cables.
TECHNICAL FEATURES
3. JTM is the NEW high performance, compact and easy to install joint.
A single body with all the electrical functions integrated!
The Nexans “TRIPLE GT125” is an integrated stress control field, insulating Type tested acc.
and conductive tube, which can withstand high voltage applications up to 24kV Cenelec HD 629.2
and up to 400mm². IEC 60055-1
From 36kV a double dual layer tube is used.
A double layer pad with conductive rubber inside and HK orange mastic
outside ensure a Faraday cage and smooth the effect of the electrical field in the
connector area.
MC types are supplied with GPH® mechanical connectors.
The outer sheath is restored with heavy/medium wall adhesive lined tubing.
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
58
52GTS.1
APPLICATION
52GTS1 heat-shrink straight joints are designed to connect single core plastic
insulated cables with Cu wires screen with Um=52kV.
TECHNICAL FEATURES
Conductive tape is used to fill the gaps and cover the connector.
The screen cut on both sides are covered with stress grading mastic plates
as well as the connector area. Type tested acc.
IEC 60840
The joint body consists of a stress control tubing, an insulating, heavy wall
tubing and finally heavy dual wall screened insulating tube.
For other cable Please contact our Various earth Design Various earth for
types please sales office when connection design accommodates connection kits are
contact our sales inquiring joints for solutions exist for various connector/ available for screen
office. same type cables armoring. For exact ferrule types. connection. For exact
with different cross details contact our details contact our
sections. sales office. sales office.
59
• QUICK AND EASY TO INSTALL, SHORT DESIGN • COMPLIANT TO REACH REGULATIONS
60
Nexans Power Accessories
sales.npai@nexans.com
www.nexans.com/power_accessories