SHENLI
Model YQ Series Upset Testing Machine
Application
The upset testing standard in China is drafted by Shenli together with the Chinese
Authorities, and with a utility model patent (patent number: ZL 2011 2 0490824.3, and
21.201130493724.). The machines work with the standards ISO 9443 surface quality
requirement, YB/T5293, and GB/T 233 etc.
The test method of metal material upset test is to apply the compression force along the axis
of the specimen at room temperature or elevated temperature, to compress the specimen and.
check the metal ability to withstand the plastic deformation and show the surface defects
under the prescribed upset ratio. It is mainly used for the quality control in order to improve
the defect situation of the molded metallic parts in mass production. According to the national
standard, the upset ratio 2/3 shall be done within only 0.5s. In addition, the system has the
function of adjusting the upset speed, that is, it can complete the upset at various slow
speeds so as to meet various actual demands in production. Therefore, its performance fully
meets the requirements of material production enterprises and material application
enterprises for testing the performance of materials in the rapid stamping process.
The upset machines are mainly used in iron and steel enterprises, standard parts
manufacturers, and tool manufacturers etc for their production and inspection of metal
materials.
www.shenlltest.comSpecification
SHENLI
Model/ specification (cold upset specification)| __Ya-1000 ya-2000 ya-3000 9-500
Type specification (hot Upset Specification) oR-1000 vyaR-2000 vyaR-s000 va-5000
Max, upset force (kN) 1000 2000 3000 5000
Max. shearing force (kN) 1000 1000 (Optiona
Max. alignment force (kN)
160 (Standard) 30¢
0, 600 (Optional)
150 ,300 600 (Optional)
Cold upset speed (mms) 5 eo 70
Hot upset speed (mms) 60 70 90
Upset time (s) os
Shearing capacity (mm) 5~20 5~25 Optional
Cold upset capacity (mm) s~20 5-25 1e~35, 20~05
Hot upset capacity (mm) 5~35 20~60 20~90 20~110
Cold Upset ratio 12
Hot upset ratio 18
Oiltank volume ‘About!50 liters | About200 titers | About300 titers | About350 titers
Safety protection device
Multiple protections, such as overioad, travel imit, safety shield and so on
Load frame dimension (mm) 1800%670%1400 | 2050x840%1650| 750x750 1906 |1100% 1100x2260]
Pump station dimension (mm) '300%900 1000, }1950x 1100 1050|1950 x 1400%1360|
Table size (mm) 560%550%950
Power 3 4 9 12
Weight (kg) 1900 2600 5500 7500
www.shenlitest.comSHENLI
Model YQ-Z series Computer Controlled or PLC Controller Upset
Testing Machine
Computer controlled machine
PLC controlled machine
‘The Model YQ-Z series Computer Controlled Upset Testing Machine and the model YOA-Z
series PLC control upset testing machine are newly developed on basis of the YQ series;
Compared with the YQ series, the YQ-Z series and YQA-Z series are complemented with
computer software controller and PLC controller respectively, with extra advantages of quick
and accurate testing position setup, flexible upset ration setup by the software, no needs of
the different dies; all above make the tests much easier and higher efficiency. All YQ series
upset testing machines can be upgraded into the computer control version YQ-Z or PLC
control version YQA-Z.
www.shenlltest.com