RAAGEN Material
Testing Machines
Turkey
. wir schneiden Stahl
Neusa®, 25.02.21
Non-binding offer no. 210225-0001 — subject to modifications
RFQ by email of January, 25" 2021 / Quotation valid until April, 30" 2021
KRENN — Material testing press 2160 / 2400 (1600 kN / 4000 kN)
+ Consisting of two single presses for shearing and upsetting of wire rod samples ranging
from 5 to 45 mm @ (dependent on alloys)
+ For crack testing of steel rod, bars and wire in accordance with DIN EN 10263-1 to -5
+ Shearing of samples up to a length of approx. 300 mm (normal bending radius) possible
+ Extremely solid and durable 4-post design
+ With pneumatic safeguards at shearing press and upsetting press in compliance with
OHS regulations (at least 6 and up to 10 bar air pressure at approx. SOl/min necessary
for operation)
+ Emergency stop functions integrated
+ Stepless stroke adjustment via Siemens $7-1500 Controller
+ Standard voltage 3 x 400 v / 50 Hz
+ Connected load 11 kW
+ CE-conformity declaration
+ Type of drive: hydraulic (power pack outside of the press)
Working pressure: 600 bar / Oil filing: approx. 100 liter
+ Color RAL 5015 or according to customer's requirements / moving parts and obstacles
RAL 1003
+ More than 90% of all components are “Made in Germany”
Page 1 of 10RAAGEN Material
Testing Machines : i
Turkey
Sample configuration double press 2160/2215
Page 2 of 10RAAGEN Material
Testing Machines
Turkey
>
. wir schneiden Stahl
Properties of the press and equipment included in the total price
1) Shearing press
+ Press capacity 1600 kN
+ One set (3 pcs) of cutting blades included, consisting of one upper and two lower
blades
+ One shearing device KP0040 size 1 (for mounting the blades) included /
suitable for mounting blades @ 5 to 30 mm
+ Hydraulic clamping fixture for locking wire samples into position during cutting
(controlled by PLC / can be switched off)
Important note: For wire bigger than @ 30mm a different shearing device and a revised
clamping fixture is necessary. This has to be considered before ordering a new machine.
2) Upsetting press
+ Press capacity 4000 kN
+ One set of pressure plates included (upper and lower plate)
+ Stepless stroke adjustment
3) Controller / PLC
+ Siemens SIMATIC $7-1500 within Rittal control cabinet including air conditioning
+ Operated via SIMATIC HMI 19” Panel
+ System parameters can be set up and monitored via the panel
+ Stepless presetting and saving of all necessary upsetting processes
+ Measurement and monitoring of (sensors included):
Pressure / oil temperature / piston position / status clamping fixture / air
pressure / piston stroke speed / total no. of strokes and more)
Page 3 of 10RAAGEN Material
Testing Machines
Turkey
. wir schneiden Stahl
+ incl. KRENN-software (individual software)
+ Very sturdy metal construction for the HMI
alternatively: Rittal support arm system for HMI 19" Panel
+ PILZ safety control system included
4) Type of drive
+ Hydraulic power pack including oil heating
+ 600 bar working pressure
+ Improved oil-air cooling for continuous operation in hot environments
+ Oil tray in accordance with environmental protection rules
+
Multi-stage pump
5) Additional equipment / custom modifications
none
Services included within this offer
Transport, packaging and insurance
CIF Ankara, TURKEY including packaging and insurance (except unloading)
Installation and training
Installation of the press as well as instruction and training will be carried out by KRENN at
your plant for approx. 5 days (medium supply, such as compressed air and electric power,
will be provided by customer)
Page 4 of 10RAAGEN Material
Testing Machines
Turkey
r >
Maintenance
One maintenance at customer's plant during warranty period (one year) included (spare
parts not included)
Documentation
Complete documentation complying with Machine Directive 2006/42/EC in English
as pdf-files:
- electrical diagrams
- technical drawings (only for the complete machine)
~ manual
- CE conformity declaration
- cable routes
Total price excl. VAT: 357.500 EUR
All additional services, works and requirements requested by customer are subject to discussion
and would be offered separately if necessary
Page 5 of 10RAAGEN Material
Testing Machines
Turkey
i >
Spare parts and accesso
nd
oe
Quantity |)Prieeiper
Pan
[ees Vcd acy
Schervorrichtung Gr. 1 Shearing device size 1
+ _| 70040 |i0042010000 10042010000, Be eaenee||
2 | x [obermesser (bis 6 30mm) Upper blade (upto 3emm) | 1 430,00€
3 |v JUntermesservorne (bis 6 30mm) [Lower Blade (front) -(up to] 470,00€
30mm)
4 | 2 JUntermesser hinten (bis ¢ 30mm) [Lower Blade (back): (unto | 275,00€
30mm)
5 | kszaea | Druckplatte oben 2400 Ind.¢ | UPPer Pressure plate 2400 1 1.135,00€
Lower pressure plate 2400
6. | KP34o1 |rucplotte unten 2400 8220mm | 1 855,00€
7 | kP1001 | Filterelement far Ageregat Filter for hydraulic drive unit, 1 307,10€
SCHUTZFOLIE 19" WIDESCREEN | Protective sheet 19°-
8 | 185420 | Far HMI Panel WIDESCREEN for HMI Panel a Stans
Dichtsatz kompl. fir
9 eo eo oD Set of seals for cylinderZ160| 1 656,65 €
Dichtsatz kom fr 5
10 | KP3601 | Arbeitszylinder 2400 / ab ee 1 | 1.168,20€
Maschinennummer #10008 re
| a1 | xp2873 | schutescheibe 2100 Fronttur | Protective sleld 7100 one 1 129,00€
12 | KP2872 | schutescheibe 2400 Fronttiir eee ee om a 161,00€
Page 6 of 10RAAGEN Material
Testing Machines .
A a > >
Turkey ... wir schneiden Stahl
Conditions of sale
Preliminary approval / FAT (factory acceptance test)
Before delivery a preliminary acceptance of the machine will take place in the presence of
company representatives of the customer at the Krenn facilities in Neusa&. After successful FAT
the equipment will directly be shipped to the customer for installation and final approval based
on FAT,
Final acceptance / approval
The final acceptance of the equipment will take place on customer's site directly after
installation and training in the presence of KRENN employees. If all functional tests according to
FAT can be reproduced successfully and stable the final acceptance can’t be withheld.
The final acceptance report has to forwarded to KRENN by email within 5 days after final
acceptance. In case this time-| exceeded the equipment will be understood and treated as
“finally accepted” by the customer.
Warranty period
Claims arising from defects expire 12 months after final technical approval. During warranty
period KRENN will be responsible for repairing defects which arise from ‘aulty elements.
Defects caused by customer are in customer's area of responsibility. Par:s subject to wear and
tear are not covered by this warranty.
Lead time
Currently 11 months after receipt of order and subject to changes dependent on our order
book / detailed schedule will be provided with order confirmation.
If any technical changes occur during the scheduled project time the lead time will be extended
accordingly and a new schedule will be valid for this project.
= h
‘Technical Documentation
Planning & Engineerir
“Purchasing & Construction
Factor ance Test
Delivery & installation
Final approval & final invoice
“fnal documentation provided with FAT
Page 7 of 10RAAGEN Material |
Testing Machines .
Turk aAvR rB >
ay ... Wir schneiden Stahl
If any technical changes induced by the customer extend the time schedule by more than 3
months the final invoice (30%) will be issued in M11 at the latest even without FAT/final
approval.
Place of jul
iction and applicable law
Place of jurisdiction is Augsburg / Germany. Contract will be governed by German law. The
provisions of the UN Convention on Contracts for the International Sale of Goods (CISG) shall
not be applicable.
Contract language
Contract language will be English / all technical documentation will be provided in English /
further translation services are not included and translators will not be provided by KRENN.
Location and construction works
Customer is responsible for providing an adequate location for the press based on our layout.
All additional disassembly or construction works will be done by the customer.
Transfer of ownership
The transfer of ownership shall take place at the date of receipt of final |100%) payment from
the Buyer.
Miscellaneous
Piping from press to drive unit to be executed by customer according to their wishes - KRENN
would support during installation of the press.
Wires to be cut need to be specified exactly by the customer / samples should be sent in
advance before start of project in order to ensure that requirements could be met.
Page 8 of 10RAAGEN Material
Testing Machines .
Turke Ane ot
v wir schneiden Stahl
Delivery: approx. 11 months after receipt of order
CIF Ankara, TURKEY including packaging and insurance
Payment: 40 % down payment when order is placed against bank guarantee
50 % with dispatch against letter of credit (LC)
10 % after approval at your plant against performance bank guarantee
Important note: project will only be started after receipt of down payment
All payments 10 days net
KRENN GmbH & Co. KG / 25.02.2021
Albert Krenn Thomas Friske
Managing Director jead of Sales~ Hydraulic steel cutters and
testing presses
Page 9 of 10KRENN Material Testing Press Z160 / Z400 (1600/4000 kN)
Specifications, Shearing Press Upsetting Press.
Press force of working piston 1600 kN 4000 kN
Piston forward stroke speed 6.3 mmis 8.0 mm/s
{dependent on piping, abrasion etc (1.7 mmis)
Piston return stroke speed 12.3 mmis 15.2 mms
dependent on pping, abrasion ete
Piston stroke 0-200 mm 0-90. mm
+ am, fiited by PLE
Gil fil quantity (max.): 101
Working space
Height 490 mm 615 mm
Width 605 mm 760 mm
Depth 520 mm 610 mm
+F Sam, without plas andor other structures
‘Supply voltage and 400 V, 60 Hz
connected load 11k
Press dimensions
Height: 3000 mm
Width 2200 mm
Depth: 1080 mm
Weight: ca. 7.000 kg
_angrox. dimensions without guarantee / dependent an final yout
Noise intensity ca, <80 dB (4)