Professional Documents
Culture Documents
SCS64
SCS64
Membrane Accumulator
Piston
Piston Ring
56
HYDNET ab: Stockholm tel:08-59 470 470 fax:08-59 470 479, Göteborg tel:031-499 490 fax:031-499 499 Malmö tel:040-66 44 511 fax:040-66 43 510
ACE-Kat_2003_UK_056-061 22.09.2003 17:32 Uhr Seite 59
Anschlag
Positive Stop NM 64 QF 64
11
M64x2 ∅ 48
∅ 76
Klemm-
Clamping
schlitz
Slot
B ∅ 60 Hub
Stroke
A max Breite
Thick
58 16 mm
Note: 150Beimmeinem Hubmodel
stroke von 150
doesmmnotentfällt
includedieStop
Anschlaghülse.
Collar and 9,5 80
Festanschlag
positive stop durch
is provided Aufprallkopf
by the rod button(60which
mm) realisiert.
is 60 mm dia.
Basic Unit Locking Ring Square Flange
Install with 4 machine screws with
Tightening torque: 50 Nm
Clamping torque: > 210 Nm
S 64
100
12
80
40
25 12 M10
12,5 C max
min D 78
Technical Data
Energy capacity W3: At max. side load angle do not In creep speed the shock absorber can be pushed through
exceed 80 % of rated max. energy capacity below. its stroke.
Return spring force: 75 to 365 N. In creep speed conditions the shock absorber provides
Issue 4.2003 Specifications subject to change
Operating temperature range: -12°C to 70°C. minimal resistance and there is no braking effect.
Impact cycles per hour: Emergency use only. Calculation: For further details of calculation and selection
please consult ACE.
The calculation and selection of the correct ACE Safety
Shock Absorber for your application should be referred to
ACE for approval and assignment of unique identification
number.
HYDNET ab: Stockholm tel:08-59 470 470 fax:08-59 470 479, Göteborg tel:031-499 490 fax:031-499 499 Malmö tel:040-66 44 511 fax:040-66 43 510 59