Professional Documents
Culture Documents
Etut-Floor Finishes
Etut-Floor Finishes
the edges complete at all leads and lifts as per the direction of
the Engineer-in-charge.
(12) FLOORING:
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 264
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 265
shade (Raw silk white, Raw silk pink, Ivory Raw silk), (viii) Wood shade (Teak
wood beige, Fine Teak wood, Fine wood) or equivalent as per the approved
colour, design and pattern, all complete as specified and as directed
by the Engineer-in-Charge. The laid flooring shall be protected with an
8mm thick PU Floor Cover till the end of the project. The rate includes for
architectural Ornamental Designs/patterns etc., upto 10% of the flooring
area
(iv) Pre-Polished Granite Flooring: (Refer Drawing 49,50,51& 52)
Lift lobby flooring in all floors, shall be provided as per
Architectural drawings colour coding with Pre-Polished Granite Stone
Flooring (minimum size1200 x 800 mm) in required design and patterns,
in linear as well as curvilinear portions of the building all complete with
gangsaw cut18 mm thick Granite stone slab over 20 mm (average) thick
base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with
cement slurry and pointing with white cement slurry admixed with pigment
of matching shade including nosing, rubbing, curing and polishing etc. The
Pre-Polished Granite stone slab Gang saw cut colour and shades shall be
from any of the or combination of (i) Black shade (Jet Black, Black galaxy,
impala black, black pearl) (ii) white shade (River white, Cera white, Kashmir)
(iii) Gold (Imperial Gold, Ivory Gold, Ivory Gold TP, Kashmir Gold, Kashmir
Gold B, Madura Gold, Madura Gold honey, Madura Gold Light) (iv) Brown
shade (Icon brown, Ivory brown, Brown pearl, Silk brown, D brown, Paradisso
brown, Tan Brown), (v) Red shade (Imperial red, Mapple red, Cherry red,
classic red), (vi) Grey shade (Cera Grey, Steel Grey, Ash grey), (vii) Raw
Silk shade (Raw silk white, Raw silk pink, Ivory Raw silk), (viii) Wood shade
(Teak wood beige, Fine Teak wood, Fine wood) or equivalent as per the
approved colour, design and pattern, all complete as specified and as
directed by the Engineer-in-Charge. The size of stone slabs for steps i.e.,
treads, risers etc., shall be of single length. The laid flooring shall be
protected with an 8mm thick PU Floor Cover till the end of the project.
The rate includes for architectural Ornamental Designs/patterns etc., upto
10% of the flooring area.
(v) Fully Body Glazed Vitrified Matt/Antiskid Finish Tiles (Refer Drawing
49,50,51& 52)
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 266
chipping diamond cutter only. Laying of tiles will be done with the notch
trowel, plier, wedge, clips of required thickness, leveling system and rubber
mallet for placing the tiles gently and easily. The cost includes making cut
holes & providing PVC sleeves in the openings as necessary to run
different services including electrical/plumbing/HVAC/Fire integrating all
services complete at all leads and lifts as per the directions of the
Engineer-in-charge. The laid flooring shall be protected with an 8mm thick
PU Floor Cover till the end of the project. The rate includes for architectural
Ornamental Designs/patterns etc., up to 10% of the flooring area.
(vi) Combination of Pre-Polished Granite Stone and Fully Body Glazed
VitrifiedMatt/Anti skid Finish Tiles Flooring: (Refer Drawing 49,50,51& 52)
Corridors (Air-Cooled) flooring in all floors shall be provided as per
Architectural drawings colour coding with Combination of “Fully Body Glazed
Vitrified tiles Matt/Antiskid finish Tiles (Combination of 1200 x 800 mm /
1200 x 1200 mm size) (thickness to be specified by the manufacturer)
with water absorption less than
0.08% and conforming to IS:15622, of approved brand &
manufacturer, in all colours and shade, laid on 20 mm thick cement mortar
1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3
kg/sqm including grouting the joints with white cement and matching
pigments etc. The tiles must be cut with the zero- chipping diamond
cutter only. Laying of tiles will be done with the notch trowel, plier, wedge,
clips of required thickness, leveling system and rubber mallet for placing
the tiles gently and easily”
and
“Pre-Polished Granite Stone Flooring (minimum size 1200 x 800 mm) in
required design and patterns, in linear as well as curvilinear portions of the
building all complete with gangsaw cut 18 mm thick Granite stone slab over
20 mm (average) thick base of cement mortar 1:4 (1 Cement : 4 Coarse
sand) laid and jointed with cement slurry and pointing with white cement
slurry admixed with pigment of matching shade including nosing, rubbing,
curing and polishing etc. The Pre-Polished Granite stone slab Gang saw
cut colour and shades shall be from any of the or combination of (i) Black
shade (Jet Black, Black galaxy, impala black, black pearl) (ii) white shade
(River white, Cera white, Kashmir) (iii) Gold (Imperial Gold, Ivory
Gold, Ivory Gold TP, Kashmir Gold, Kashmir Gold-B, Madura Gold, Madura
Gold honey, Madura Gold Light) (iv) Brown shade (Icon brown, Ivory brown,
Brown pearl, Silk brown, D brown, Paradiso brown, Tan Brown), (v) Red
shade (Imperial red, Mapple red, Cherry red, classic red), (vi) Grey
shade (Cera Grey, Steel Grey, Ash grey), (vii) Raw Silk shade (Raw silk white,
Raw silk pink, Ivory Raw silk), (viii) Wood shade (Teak wood beige, Fine
Teak wood, Fine wood) or equivalent as per the approved colour, design
and pattern, all complete as specified and as directed by the Engineer-
in-Charge”
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 267
The cost includes making cut holes & providing PVC sleeves in the openings
as necessary to run different services including
electrical/plumbing/HVAC/Fire integrating all services complete at all leads
and lifts as per the directions of the Engineer-in-charge. The laid flooring
shall be protected with an 8mm thick PU Floor Cover till the end of the
project. The rate includes for architectural Ornamental Designs/patterns
etc., upto 10% of the flooring area.
(vii) Fully Body Glazed Vitrified Antiskid Finish Tiles Flooring: (Refer
Drawing 49,50,51& 52)
In the following Floors Fully Body Glazed Vitrified Antiskid Finish Tiles
Flooring shall be provided as per Architectural drawings colour coding with
Fully Body Glazed Vitrified tiles Antiskid finish Tiles (800 x 800 mm size)
(thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS:15622, of approved
brand & manufacturer, in all colours and shade, laid on 20 mm thick
cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement
slurry @3.3 kg/sqm including grouting the joints with white cement and
matching pigments etc. The tiles must be cut with the zero-chipping
diamond cutter only. Laying of tiles will be done with the notch trowel,
plier, wedge, clips of required thickness, leveling system and rubber
mallet for placing the tiles gently and easily. The cost includes making
cut holes & providing PVC sleeves in the openings as necessary to run
different services including electrical/plumbing/HVAC/Fire integrating all
services complete at all leads and lifts as per the directions of the
Engineer-in-charge. The laid flooring shall be protected with an 8mm thick
PU Floor Cover till the end of the project. The rate includes for architectural
Ornamental Designs/patterns etc., upto 10% of the flooring area.
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 268
iii) Fully Body Heavy Duty Vitrified Matt/Antiskid Finished Tiles Flooring:
(Refer Drawing 49,50,51& 52)
In Open Courtyards and similar locations Fully Body Heavy Duty
Vitrified Matt/Antiskid Finish Tiles Flooring shall be provided as per
Architectural drawings colour coding with Fully Body Heavy Duty Vitrified
tiles Matt/Antiskid finish Tiles (600 x 600 mm size) (thickness to be
specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all
colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4
coarse sand) jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments etc. The tiles
must be cut with the zero-chipping diamond cutter only. Laying of tiles will
be done with the notch trowel, plier, wedge, clips of required thickness,
leveling system and rubber mallet for placing the tiles gently and easily.
The cost includes making cut holes & providing PVC sleeves in the openings
as necessary to run different services including
electrical/plumbing/HVAC/Fire integrating all services complete at all leads
and lifts as per the directions of the Engineer-in-charge. The laid flooring
shall be protected with an 8mm thick PU Floor Cover till the end of the
project. The rate includes for architectural Ornamental Designs/patterns
etc., up to 10% of the flooring area.
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 269
(x) Rectified Polished Ceramic Tiles: The Flooring for Toilet Blocks in all
floors for the Hospital Building and Ancillary structures shall be done as per
Architectural drawings colour coding, with anti-skid Matt finished Ceramic
floor tiles of size 400 x 400 mm / 300 x 600 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS: 10545 in
colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement
mortar 1:4 (1 Cement: 4 coarse sand) jointing with white cement slurry @
3.3kg/sqm including chipping, hacking, slurry, curing, grouting the joints with
white cement and matching pigments, etc. The tiles must be cut with zero
chipping diamond cutter only. The laying of tiles will be done with the notch
trowel plier, with a rubber mallet for placing the tiles gently and easily. The
cost includes making services cut out / openings for electrical, plumbing
pipes, etc., removing all loose material and disposal of all debris to the
designated place, all as per drawings and directions of the Engineer-in-
charge. No extra payment for any architectural Ornamental Design up to
10% of the cladding area.
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 270
The above flooring shall be done over the vacuum dewatering flooring
(VDF) with M35 grade cement concrete with appropriate thickness as per
structural design and the technical specifications mentioned in the tender
document.
(xii) High performance Epoxy Flooring system with Highest Degree Skid
resistance: The flooring for Ramps, sloped portion of drive ways and
similar locations in the Hospital Building shall be done as per Architectural
drawings colour coding with High-Performance epoxy anti-skid flooring
system of 2mm thickness. The flooring system comprises of applying (1)
Application of solvent free epoxy primer at 200-300 gm/Sqm (depending
on surface condition) (2) Application of three component high build
solvent free epoxy base coat at minimum 300 Micron thickness (3)
Providing specialized anti slip grain No. 2 at minimum dosage of 1.25 Sqm
per kg (4) The final application shall be done with High built solvent free
epoxy top coat at dosage of 500 gm per Sqm. The product shall comply
with manufacturer’s specifications.
(xiii) Kota Stone Flooring and Skirting: The flooring and skirting for all
Ancillary Structures and Fire Escape Staircase (from basement to ground
floor) in the Hospital Building shall be provided with Kota Stone as per
Architectural drawings. The flooring shall be done with
25mm thick Kota stone slabs over 20 mm (average) thick base laid over
and jointed with grey cement slurry mixed with pigment to match the shade
of the slab, including rubbing and polishing complete with base of cement
mortar 1 : 4 (1 cement : 4 coarse sand). The Skirting shall be done with
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars
laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse
sand) and jointed with grey cement slurry mixed with pigment to match the
shade of the slabs, including rubbing and polishing complete. The steps of
Kota Stone shall have pre-finished nosing the length of the steps i.e.,
treads and risers shall be of single length not less than 1.20 m. The Kota
Stone flooring except treads of steps shall be Mirror polished to give
high gloss finish complete.
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM
Part – B, 271
(.5mm). The consumption of Yarn is 19 oz/ yd 2 i.e., 915 g/sqm. The rate
includes cost of material, labour, adhesive, bal tile filler, all wastages,
preparation of surface etc., in all leads & lifts complete as per
direction of Engineer- in- Charge. The Product should be installed as per
manufacturers specification. The P r o d u c t Should be CRI
Certified (Green Plus).
Note: The under layer shall be done by laying 40mm thick Cement
Concrete flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 graded stone
aggregate) with a floating coat of need cement, including cement slurry.
Correction/Omission/Insertion/Overwriting//Nil AE EE&SM