Name of students : Amhamd Abdullah & Aws Al-Hajjaji
Supervisor : Khalid al-Kurani
Date : 25/2/2024 Well head and x-mass tree Flange Provide connection for wellhead espsially tubing head adaptor Lower Gate valve used to control the flow of the master well and normally it is always open but used valve in maintain the upper equipment (standpipe) Upper Gate valve used to control the flow of the master well (Primary valve). valve Flow tee Allows production to flow from the well to the flow line. Kill valve Used to circulate kill fluid or Corrosion inhibitor into the well. Kill line The line which the kill fluid inject from. Wing Gate valve Used to control the production of valve the well Chock Hydraulic valve used for control the well production Adjustable The choke is used to control the production, perhaps to prevent sand production or to maintain the most efficient rate for the well Swap provides access to the well for a wireline or valve coiled tubing operation. Pressure Used for read the production pressure gauge T-cap Isolate the upper section of x-mass tree