‘Schedule of Rates, LGED, February 2023
Tom Code
Brief Description of tern
cage. [Pwo
anda
600 mm creulr da (PWD 21.140
1047000
anrae
"5 ram Greer do (PWD ALTA)
T5600
Bans
Tarafactrina, sopping, fttng end thing tel aril ending n boundary wal wih 38 mm da
MS Pipe with thickness 6 mm placed @ 150 rm cle vertically and mending geod the
damages wth C., (1:2:4),feshng wit two coats of painting with synthetic enamel paint
‘vera coat ofant-corosive pant et. complete as per crawing and design and accepted by
the Engineerin-charge, (Rates exuding te cost f pant) [PWD 21.15]
san
728405]
e206
‘Sepalyng ting and Mong of wooden wedge (22 mim base x 12 mn height) instead of paty
for fing glass panes with wooden frame by nals r by any ether approved methad inlucing
the cost of necessary wood (Garan Jany Loca a), nal etc, all complete and accepted by
the Engineerinecharge. (Rate is exdding the cst of wenden frame, pang and 8 mam thick
ass panes) [PWD 22.1
ana
‘Supplying ting and fing of best quly of differant da foreen made aluminium pipe carta
ral for door and window induding cting and ftng-faing as per required measurement and
Supplying necessary screws SS clamp, electric dl and rowel plug induing charge of
locrcty etal complete and accepted by the Engneerin-charge[PWO 22.2],
20a
20 mm da Aluminium pipe curtain rll [PWD 22.2.1]
708.00
s20ara
25 mi da Aluminvo pipe cata rall [PWD 22.2.2)
788.00
S208
‘Sopplvng ting nd Thing ferent da bet quality Stainless steal (SS) pipe 5 curtain ral
for door and wondows inducing cutting and ting fing as per required measurement and
Suopling heavy type SS Clamps & 2 nos SS End Caps, necessary screws, electre del and
rowel pig including charge of elect ee, all comple and acceptes by the Engineer
charge PWD 22.3
20084
20 mm da Staness steal (5) pipe with wal Wiexness 1.00 wm [PWD 223.1)
3.00
2082
75 mim da Sales seal (5) pipe with wal hieaness 1.20 mm [PWD 2232
385.00
ante
32 mim da Staness seal (55) pipe wih wall Wiemness 120 wm [PWD 2233
5.00
ans
‘Supplying iting and Ting spedl qaly 10 mm tick car tempered glass doo: cuding al
accessors, 1 Set Noor mounted auto door closure, 2 nos. camping devies, 1 set locking
eve, top hinge and mandi et. complete inal respect as per erawing ard direction ofthe
Engineersn-charge (PWD 224]
san
T5760
2020
Supplying ting and fing best quality of diferent Wick cer glass parton with 44 rm, 48
rm, 1.5 hm aluminium box, protector bt (inal), protector bi (double), lan Including all
‘Sccessories et. all complete and as pe draveng and Grecton of te Enginerin-charge (PWD
225)
20204
1 mm tek clear sass partion with aluminum Box [PWD 22.54)
sam
7942.00
20302
Tm Tick clear Gbss patton with laraniom box (PWD 2252]
sain
310600
2007
“Supplying iting and Ting of Chatiogram Teak wood Sip (62 mim x 2 mmx ZO man) for
fixing of alumvnium curtain ras as per design and drawing, Ring and fing coat of ring
eal complete and accopted by the Engincerin-charge (Rate is excluding the cst of
polishing ete) [PWD 22.61
wa.
nz
‘Sunayng iting and fining verkal venetian binds made with glass fer fares (erign
made) with supoly ofa the best qualty materials (fregn made) uch ax head ai
(aluminium), end cape, rod tt, sigger (stopper), runner, spacer (ink), hancing cord bal
‘han nk chain, coré-weight wghtalate laste washer, alas Aber fabrics, and head cap-st
all complete and accepted by the Enginee-n-charge, [PWD 22.7)
an
7208.5
20a
Supplying ting and fing horantal venetian Bods of 25mm wieth made with aluranium
fol sips (oregn made) with suply ofall materials (foreign made) sucr as head ral,
bottom al roe tit, ead cap, batlom cap, gear ba, stick, support and cap, caré drum ard
Suppor, bracket, core lock, cord equalizer, top holder, ladder, cord, handling cord and
aluniium fos ee all complete and accepted by the Enginesr=r-charge, [PWD 2.8)
can
2034
‘Supplying ting snd Thing of Poizonta ebra Blind made with palester fabrics, synthetic net
with 3 inch vngfupwe coated sips (foreign mace) with supply ofall mata (foreign made)
Such a head ral, botom ral, rod tt, head cap, bottom cap, gearbox, stck, support and cap,
Cord drum and stpport, bracket, cord lock, cord equazer, top elder, ladder, coe, handling
{ord and aluminium Pls et all complete and accepted by the Engineerincharge, [PWD 22.9]
sam
5500
2025
‘Sopalyng fing and fring of lockout translucent roller lind of PVC wn lavas
fiberglass fabrics (orion made) with supply of al materials (feeign made) such 2s head ral
(aluminium), end cap-set, rod tit, siger (stopper), runnes, spacer (nk), hancng cord ball
chan nk chain, cond-weight we'ghtolate paste washer, las ber abies, and head capset
fe all complete and accepted by the Engineerin-charge [PWD 22.10]
san
3507.00
[Section 21 : Concrete Solid And Hollow Blocks, Facing And Paving Stones Etc,
ie,
Tote Rae ofa ee seu be weliove oa aupp and cara,‘Schedule of Rates, LGED, February 2023
Tom Code
Brio Description of arn
Sano
a0 re tick Concrete Sad Block wall works having rnnum compressive svength of 15
MPa and water absorption not greater than 79% of size (240 x 14x 70) my laying wth
specfied mara” of cement ard sand ina vati 1:5 (sand not less than FM = 1.2) ang
minimum thickness of 12 mm in foundation an pint, fling the joints interstices uly wit
‘mortar, racking ut the joint and curing fer minimum 3 (thre) days on mertar ots by jute
{ots in wet, fellowes by impervious wet coverng for another 4 (our) days curing et. ll
Completed by the contractor and accepted by the Engineerinecarge, [PWD 30.1]
Sa
‘he layer of Concrete Sold Block Song having minima compressive strength of 15 MPa and
water absorption not greater than 7% of size (240 x 114 x70) mm in ground fer] foundation
Incluging preparaton of be and lg the Interstces with ne sand (FM. = 0.8), leveling et
all completed by the contractor end aceptes by the Engineesn-charge. (PWD 30.2
san
5.00
cea
7240 mm thick Exterior Wal wth Conerete Sod Block having minimum compresive strength of
15 MPa and water absorstion not greater than 7% of sze (240 x 114 x70) rm, baying with
spectied mortar of cement and sand in arti 1:5 (sand notless than FM =1-2) and mir
thickness of 12 re, illng the interstices with mortar and making ond with cannectng walls
‘Mrames including necessary scaflding and curng for micimum 3 (Gree) days on mortar
Sains by ute forsh in wey, flowed by impervious /wet covering for another 4 (fur) days
{ring et.al completed by contractor and accepted by the Engineersn-carge. (PWD 30.3]
cere
(Groun feo [PWD 30.3.
3036.00
Eau
"hd foreach ad fear above ground Roar [PHD 3032]
73.00
Loe
TI mam Bick Parton Wall with Conereta Sod Block having minimum compressive rength oF
15 MPa and water absorstion not greater tran 7% of sze (240 x 114 x70) rm, ly with
spectied mortar of coment and sand ina ratio 1:5 (sand notless than FAM =12) and miimam
thickness of 12 rem, fling the interstices with mortar and making Bond with connecting wale
‘rams nelidieg necessary scaffolding and curng for meurum 3 (twee) days on mortar
Jains by ute forash in we, flowed by impervious /wet covering for anather 4 (fur) days
firing etal completed by contactor and accepted by the Engineer-i-charge [PWD 30.4]
aioe
Ground fear [PWD 30-4.)
an
T2700
anna
"Rad for each ed Moo" up above around Noor [PWD 304.2)
an
3500
Bans
7A0 mm tick Exterior Wall with Concrete Fallow Block having minimum compressive srenath
Of 15 Ma of size (390 x 190 x 240) mm thickness of individual Block Shell shold not be less
than 32mm, water absorption not mare than 73%, laying wth species mocar of cement and
sand ina rato 1:4 (Sand not less than fF. =1.2) and minimum thickness of 15 ren (9 mm for
Shall porson and 6 mm for side hollow parton, fling th interstices with mortar and making
bond with connecting wal frames including necessary scafflding and curing for minimum 3
(Ghree) days on mortar joints by jute brush in wat fellowed by impervious wet eoverng for
another $ (fou) days cating fe al completes by contractor and accepted bythe Engineer-n-
charged 30.5),
Eee
(Groune foor [PWD 30.5.1)
san
7898.00
eaL0sa
"hd foreach ad Haar up above ground Roor [PAD 306]
wan
36.00
Eesara
T12 mm Shek Parton Wall with Coneeta Haliow Sok having munimum compressive avenath
of 15 MPa of size (390 x 190 x 112) mm thickness of wdviual Block Shall shou not be less
than 25mm, water absorption nat mere than 73, laying with spedied mortar of coment and
sand ina ratio 1 (san not lss than FM =1.2) minimum thickxess of 15 mm (9 mm for shell
potion and 6 mm for nse haw potion), ili the interstices wth mortar and making bond
with connecting walls rames inlcing necessary scaffolding and curing for minimum 3
(three) days on mortar jt by jute /orush in net, followed by merous /wet covering for
another 4 (fou) days curing teal completed by contractor and accepted by te Engineer-in-
frarge [PWD 30.6
sai06a
(Ground floor [PWD 30.6.1)
an
397.00
eaTnee
TRA Tor each od Moo" up above around Noor [PWD 3062
an
3500
e2na7
7a0 ram tick Exterior Wall vith 3 Holes Concrete Hollow Bloc having minmom compress
Strength of 15 MPa and water absorption net great than 7% of sl (240 x 114 70-34)
rm, layna with speiied mortar of cement and sand in 2 rato 1:5 (sand nat less han FM
2) and minim thickness of 12 rm, filing the nerstces with mortar ard makng bond
with connecting walls /rames nding necessary scafflding and curing for mir 3
(three) days on mortar joints by jute /orush in wet, followed by imperious /wet covering for
another 4 (fou) days ering tt al completed by contractor and accepted by the Enginer-in-
trarge [PD 30,7,
eaLo7
Ground floor [PWD 30.7.1)
77a
anor
"Rad Tor each ed Moo" up above around Noor [PWD 307.2)
735]
e208
714 mim Hck Parton Wall with 3 Holes Concrete Hallow Block having minum compressive
strength of 15 MPa and wate absorption not greate than 7% of siz (240 x 114 X 70-34)
nm, lay with spied mertar of cement and sand in rato 1:5 (Sand nat ess than FM
) and minimum thickness of 12 mm, ling the interstices with martar and making bond
Tote Rae ofl ee seul be wehisve oa supp and aa,‘Schedule of Rates, LGED, February 2023
Tom Code
Brio Description of arn
with connecting walls [ames nding necessary scaffolding and Gang Tor minions 3
(Qhree) days on mortar nts by jute brush in wet, followed by imperious /weteoverng for
another 4 (fou) days curing ate all completed by contractor and accepted bythe Engineer-in-
charges PD 30.8
aioe
Groune fear [PWD 30.8.1)
san
709800
ane
"Rd for ach ad oar up above around feor[PWO 3082
a
36.00
anos
"a0 rm tick Boundary Wall wih Concrete SOkd Bloc having minimum compressive srerath
of 15 MPa and water absoaton nt greater than 7% of se (240 x 124 x70) mm, lying with
Spectied mortar of cement and sand in aratio 1:5 (and notless than FaM =1.2) and minimum
thikres of 12 rom, fling the interstices with mortar and making Bond with connecting walls
‘frames ncading necessary scfflaing and cung for minimum 3 (fee) days on mortar
Joints by Jute forash in we, followed by impervious /wet covering for another 4 (fur) days
fing all cmpleted by contactor and accepted by the Engineer-n-charge. [PWD 30°59]
6.
Saito
1 mm hick boundary wall with Concrete Sold blk having minimum compressive tength
of 15 MPa and water absorton not greater than 7% of sze (240 x 124.70) rm, lying with
Spectied mortar of cement and sand ina ratio 1:5 (sand notless than FaM= 1.2) and minimum
thickness of 12 rm, fling the interstices with mortar and making Bond with connecting wale
‘rams neladiog necessary scaffolding and curng fr mcwrum 3 (twee) days on mortar
Sein by Jute forash in we, flowed by impervious /wet covering for another 4 (fur) days
tring all campleted by contactor and accepted by the Eninee-in-charge [PWD 30.10]
an
T2700
ana
7240 me thick Boundary Wall wth Concrete Hallow Slack having manmum compressive
Strength of 15 MPa of se (290 x 190 x 240) mm, thisnessofindwcual Block Shell should not
be less than 32 mm, water absorption not more than 7%, laying with speced mertar af
coment and sand in rato 1:4 (Sand nt less than FM *1.2) and mnimum thidkess of 15,
tim (9m fr shel portion and 6 mm for inside low poreon), lng the interstices with
‘mortar and making bond with connecting wals frames inducing necessary scaffelding and
tring for minimum 3 (thee) days on mavtar jens by je bruh n wet, flowed by
Impervious wet covering fr another 4 four) days curing ec all completed by contactor and
accepted by the Engineer ivcharge [PWD 30.11]
an
1998500
Baia
712 mim tek Boundary Wall wth Concete Hollow Block having minimum conpresave
strength of 10 MPa of size (290 x 190 x 112) my thickness of india Block Shell should not
be less than 25 mm, water absorption not more than 7%, laying with specified mortar of
‘cument and sand na vaio I°4 (sand ot less than FM =1.2)micimum thceness of 15 mm (3
rim fr shel parton and 6 mm fer inside Follow portion), fling the interstices wth mertar and
‘making bond wth connecting wals ames including necessary scaffolding and curing for
minimum 3 (tree) cays on mortar jt by jute rush in wet, flowed by imperis /wet
‘verng for another 4 (our Says curing et all completed by contractor and accepted by the
Engineern-charge(PWID 30.12}
sam
387.00
Corry
740 re thick Boundary Wall wth 3 Holes Concrete Hollow Block having minimum compresive
Strength of 15 MPa of size (240 x 114 x 70 -3H) mm, thickness of individual lock Shel should
ot Beles than 32 mm, water absorpion not more than 7%, lying wih specified mortar of
{Cement and sand in ato 1:4 (Sand nt less han FM =1,2) ard morimum duces of 15,
tr (9 mm for shell potion and 6 mm for inside hollow porton), fllng the interstices with
‘mortar nd making bood with connecting wal frames induding necessary scafading and
{ring for minimum 3 (three) day on marta joints by je /bruh in wet, fllowed by
Impervious /wet covering for another 4 four) days curing ec all cmpleced by contractor and
accepted by the Enginer-ivcharge,PWD 30.13]
coe
714 mm thik Boundary Wall with 3 Poles Concrete Hallow Black having minum compressive
strength of 10 MPa of size (240 x 114 x 70~3H) mm, thickness of indivdual Block Shel should
ot Beles than 25 mm water absorption not more than 7%, laying wih specified mortar of
fement a sand in 3 vatioT4 (Send not less than FM 1,2) mmm theeness of 15 mm (3
rm for shel portion and 6 mm fo inside Pollow portion) fling the interstices wth mortar and
making bond with connecing wals frames including necessary scafoding and curing for
minimum 3 (roe) cays on mortar jit by Jute rush in wet, flowed by imperious fet
{overng for anether 4 (our) cays curing et. all completed by contractor and accepted by the
Engineern-charge(PWD 30.14)
Tam
T0980
Ents
T12 mm tek partion wall wit send cement hollow bled wal (SCH) having compressive
strength of not es than 20 Mp, size (380 x 190 x 112) mm, thickness of ndvdua Block
shell should not be les than 25 nm, water absorption not mere than 73, lying with specfid
‘mortar (wh admire) of cement and sand ina ratio oft less than 115 (sand not less than
Fin = 1.2), filing the mesic wth mortar and making bond wih conecing walls inducing
‘necessary saffoldng and curing for min 14 days on mortar ints by Sate /orush in wet,
followed by impervious /wet covering for another 7 ays cluding cost of water, elecricty and
tier charges etc in all completed by the contractor and accepted by the Enineeri=
charge {PWD 30:15
Ground lear [PWD 30.15.1]
an
34.00
"Rad foreach ediional oor above pound floor [PHD 30.152]
ain
36.00
Tirana 10 rm ick coment plaster n coment sand = 15 suace of exeralintemal
wall itn spect externa/ntral plaster mx apple in wo coat (frst coat 6 mm and
Tote Rae ofl ee seul be nehisve oa supp and cara,‘Schedule of Rates, LGED, February 2023
Tom Code
Brief Description of tern
Second coat 4 ran), rstng the come” and edge mdvng washing of sand, leaning the
Surface, scalding and cng for mmun 3 (¥ree) cays on mortar joints by jue/orush in
wet, followed by impervous/wet covering for another 4 (our days ee. all complete et.al
‘complete and accepted by the Engines-n-charge, (Rate Is excluding the cost of routing and
Feipforcerment) [PHD 30.16]
EE
‘Ground oor (PWD 30.16.)
san
7A)
eaii62
‘hd foreach sdional floor above ground foor (PHD 30.162]
aan
605]
ana?
‘Supplying and placing of erey engraved cement concrete Bes (250 mmx 250 mmin ze)
having mirimum tckness of 24 mm over 12 mn sand cement mortar (4:1) each at a stance
(of 6 mm apart an flog the joints with cement sand mortar (1:4) indding raking cut joints
land cutting the tes to required sizes wherever necessary with nigh cles recessed pointing,
‘earing anc washing of sand, curing for mirimun 3 (Bree) days on mertar Joints by Ae
rush in wey, fllonee by impervious [wet caverng for another (fur) days et.al complete
and accepted by te Engineein-charge PWD 30.35.
Ear
Ground oar [PWD 3035.1]
oD
354.00
pair
‘hd foreach aditional oor above ground Noor [PWD 3035.2]
an
70.05]
Sante
‘Supplying and plbcng of coloured engraved cement concrete Wes (50 mm x 250 rm ih 58)
having miimum thisiness of 24 mm over 12 mm sand cement mortar (41) each ata stance
{of Gm apart and flog the fonts wth cement sand mortar (1:4) nding raking out joints
land cling the testo required szes wherever necessary with high ss recessed pointing,
‘Searing anc wasting of sand, curing for mn 3 (thee) days an marta ants by jte brush In
wet, flowed by impervious fet covering for another 4 (our) days et, all complete and
accepted by the Ergineer-in-harge [PWD 30.35.2]
sande
Ground oor [PWD 30352.1]
a
109800
nie
"hd Yor each wdivonal oor above Ground Noor [PWD 3052.2]
an
T00}
Corry
38 mm thick grey dading workin facng on superstructure wth 200 im x90 men 38 mm
Sze concrete cat peste with 20 mm thick cement mortar (1:4) tobe placed at 6 mm apa,
filing the interstices with same mortar, raking aut ots and cutting te clad ta requred sizes
wherever necessary wth high cass recessed pointing, cleaning and washing of sand,
necessary scaffolng, curing for minimum 3 (thre) days on mortar ont by je brush in
wet, followed by impervious fet covering for anothe 4 (Tour) days et.al complete and
accepted by the Engineer in-charge PWD 30.36.)
Banta
‘Ground Hoor [PWD 30.36.11
san
1568.0
52192
"hdd foreach adtional oar above ground oar [PWD 3036.2]
wan
78.05]
5 2n20
7 mm Tick coloured daddng work is Toca on supersracre wih 200 mmx SZ Fem 38
im size concrete clad peste with 20 mm thick cement mertar (1:4) tobe place at 6 mm
apart, fling the iterstices with same mortar, raking ut joints ad cutting the clad to required
Sires wherever necessary with high clas recessed poting, cleaning and washing of sane,
reoessary satfolin, curing for minimum 3 (Ue) days on mata ont by Ae [BUS
wet, Followed by inpervus /wet covering for another 4 (Tour) days et. alleamplete ard
accepted by the Ergineer-in-charge [PWD 30.36-2)
sanz
CGroune for [PWD 30.362.1]
an
1695.0
enzo
"Rd foreach adtonal oor above Ground Noor [PWD 303622]
san
1805}
‘30 man tek grey dadaing work Tadng on suparsiactre with 400 mx 100 mx 50
Size concrete at peste with 20 mm thick cement morta (1:4) tobe placed at 6 mm apart,
fing the interstices with same morta, aking out ents and cutting te clad to requred sizes
wherever nocessary wih high dass recessed point, clearing and washing of sand,
necessary saffoling, outing for minimum 3 (thee) days on mortar joints By jte brush in
wot, followed by inperveus /wet covering for another 4 (our) days et, all complete and
accepted by the Engineer in-charge [PWD 30.36.3]
anata
‘round for [PWD 30363.1]
sa
14.09]
ara
Thad Tr each adional oor above ground Hoar
EEE
sam
TH]
Baia
50 mm tick coloured daddng work in fecng on supersracare with 400 mm x 100 min x50
rm size concrete clad peste with 20 mm thick cement mertar (1:4) tobe place at 6 mm
par, fling the interstices with sae mortar, raking out jon and cuting the lad to required
Sizes wherever necessary with high clas rectssed pointing, cleaning and washing of san,
necessary scaffolding, curing for minimum 3 (tre) days on mortar ont by je [brush in
te, flowed by inper vous fet covering for another # (our) days et, al complete and
accepted by the Engineer in-charge PWD 30.3644)
sanz
‘Ground oor [PWD 3036471
wan
745900
aia
"hd foreach adtonal oor above ground foar [PWD 3036427]
wan
78.05}
ana
Tm thick ore ccloured dacdng wark hs fadg on superstructure wih 420 men x 330 mm
X15 mim sire concrete ld peste with 20 mm thick cement mata (1:4) to be placed at
Tote Rae ofl ee seul be welisve of al sup and cara,‘Schedule of Rates, LGED, February 2023
Tom Code
Brio Description of arn
Tam apary fling the intetices with same mora, raking oat jonts and cuttng the dad to
Fequred szes wherever necessary wth high class recessed porting, cleaning and washing of
Sang, necessary scaffolding, curing for mivimum 3 (thre) days on mortar nts by jute /orush
in wet, followed by impervious wet covering fr another 4 (fo) days etc, all complete and
accepted by the Engineer in-charge [PWD 30.36.5,
Een
‘Ground floor [PWD 30.365.1]
san
368.00
e272
"hd foreach adional oor above ground Noor (PWD 3036521
aan
1805]
cre
740 ram tick walln sper sucture wth Aitoclaved Aerated Concrete (RAC) Bock of size
(600 x 200 x 240 :L xx W) mm having Compressive Stength not less than 6 MPa, Nominal
Dry Dersity 850 ka/m3 and Drying Srrkage not exceeding 0.02% conforming BNBC-2020,
(ASTM C1386), laying wah specified mara of cement and sendin a ratio 1:4 (snd not less
than Ft =1.2) and minimum thickness of 10 ram, (er ote binding materals which comely
vin BN3C-2026) fling the interstices wth mertar and making bond wih connecting walle
‘rames nciding necessary scarflding and eurng for irvmum 3 (twee) days on mortar
Sein by jute forsh in we, flowed by impervious /wet covering for another 4 (fur) days
{ring et, al completed bythe contracor and aocepted by the Engineer r-charge,[PWD
Soar.)
Baza
(round too (PWD 303711
395200
i282
"Rd foreach aditional oor above ground foor [PWD 3037.12]
73.00
Las
205 re tick wall n super aucture wth Aitoclaved Aerated Concrete (RAC) Bock of size
(600x200 «200 : Lx # x W) mm having Compressive Strength not less than § MPa, Nominal
Dry Density 850 ka/m3 and Drying Shrinkage not excoocing 0.02% conferring BNBC-2020,
(STH C1386), laying wth spaced morar of cement and sand ina ratio 14 (sand not less
than F.M=1.2) and minimum thickness of 10 ram, (er other binding materals wich comply
vith @N9C-2026) fling the interstices wth mertar and making bond wih connecting walle
ames including necessary scaffolding and eung for mrwrum 3 (tree) days on mortar
Saints by ute brash in we, flowed by impervious /wet covering for another 4 (fur) days
{ing etal camplete bythe contrac and aoepted by the Engineer in-charge [PWD
3037.2)
Basa
‘Ground fear PD 30372.)
wi800
ana
"Rd for each adtonal oor above ground Noor [PWD 303722]
73.00
ana
150 mim Uiek wal in super sruclure with Aadaved Aerated Concrete (AAC) Block of sue
(600 x 200 « 150: Lx Hx W) mm having Compressive Strength not less than 6 MPa, Nominal
Dry Denshty 850 kn/3 and Drying Shrinkage not excoeding 0.02% conforming BNBC-2020,
(ASTM C1386), laying wth specified morar af cement and sand in arti 1:4 (and not ess
than F.¥ =1.2) and menimum thickness of 10 mm, (or ater binding mates which comply
vith NBC-2120) fling the inlesices wth mertar and making bone wih connecting walls
Frames inchding necessary scaffolding and curng for misma 3 (thee) days on mortar
Joints by Jute forsh in we, flowed by impervious /wet covering for another 4 (fur) days
{ring et.al completed bythe contracor and accepted by the Engineer n-charge [PWD
5037.31
aise
Ground faar [PWD 303731]
78.00
caer
"hd for each aditonal oor above ground Noor PD 30.37 32]
73.00
ana
"a0 rey tick wall n Super auclure wth Foaved Aerated Concrete (RAC) Bek fare
(600 x 200 «240 : Lx # x W) mm having Compressive Strength not less than 6 MPa, Nominal
Dry Density 850 kg/n3 and Drying Shrinkage not exceeding 0.02% conforming BNBC-2020,
(STM C1386), laying wth approved polymer modified adhesive mortar having water retention
ot ess than 75% & average compressive strength at 28 days, min 5.2 MPa canforming ASTM
270, Spitting Tense Svength nt less than (0.40 ~ 0.43 MPa) conforming ASTM C1660,
mataining Wp ratio 25% - 30% and jointing adhesive mortar layer thickness of (3 mm ~4
mm), (or othe binding materials which como wn BNBC-2020) fing the interstices wath
‘mortar and making bond with connecting wals frames inducing necessary scaffolding, cuting
ane sing AAC blocks ee all completed by the contractor anc secepted by te Encinee=n
charges PWD 30.381),
sana
(Ground foor [PWD 3038.11
W440
nara
"hd foreach aditional oar abave ground Noor [PWD 3038.12]
73.00
Easery
25 re tick wall n super aucture wth Aodaved Aerated Concrete (RAC) Bek of size
{600 x 200 x 200 : Lx # x W) mm having Compressive Stenath not less than 6 MPa, Nominal
Dry Dersty 850 kn/m3 and Drying Srrkage not exceeding 0.02% conforming BNBC-2020
(ASTM C1386), laying wth approved polymer modified adhesive mortar having water retention
otless than 75% 8 average compressive strength at 28 days, min 5.2 MPa conforming ASTM
270, Spitting Tense Strength nt less than (0:40 ~ 049 MPa) conforming ASTM C1660,
rmataining Wip rato 258 ~ 30% and Jing adhesive mortar ayer tckness of (3 mam ~4
mm), (or othe binding materials which comply win BNBC-2020) fing the interstices wth
‘mortar and making bond with cannectng walls ames inducing necessary scaffolding, cutsng
and sirng AAC blocs etc ll completed by the contactor an accepted by te Engineer
Tote Rae ofl ee seul be wehisve oa supp and aa,‘Schedule of Rates, LGED, February 2023
Tom Code
Brief Description of tern
crarge (PWD 303827
sanz
Ground floor [PWD 3038.21]
9200
ange
"hdd Yr each edavonal Toor above Ground Noor [PWD 30822)
73.00
Banas
T5O-nim OHek wal superstructure with Aolaved Aerated Concrete (AAC) Block oF ae
(600 x 200 x 150: Lx xW) mm having Compressive Strength not less than 6 MPa, Nominal
‘ry Density 850 ka/m3 and Oring Shrinkage not exceeding 0.02% conforming BNBC-2020
(@STM C1385), laying wth approved polymer modified adhesive mortar having water retention
ot ess than 75% & average compressive strength at 28 days, min 5.2 MPa canforming ASTM!
C270, Spiting Tense Strength no less than (0.40 ~ 0.49 MP2) conforming ASTM C1660,
mataining Wip ratio 25% ~ 30% and jointing adhesive mortar layer thickness of (3 mm -4
mim), (or othe binging materials which comply wrtn BNBC-2020) fing the interstices wth
‘mortar and making bond with connecting walls /rares induding necessary scafoiing,cuting
ane sing AAC blocks ec all completed by the contractor anc seazpted by te Encineer=
charges PWD 30.383),
1204
Ground tear [PWD 303831]
7a
222
"hd for each adtonal oor above ground Noor [PWD 3038.32]
73.00
\Section 22 : Heat and Water Proofing Works (Roofs)
azo
75 mm tik Terocarent Weabrent wok for water prosfng on root aving rinimum cara
{pte relates to mx rato 1:2 cement conforming to BOS EN-197-1-cEM, 52.5N
(62.5mPa)/ASTN-C 150 type-1, and best quay coarse sand (FM 2.2) induding, te supply
Gf all materials, cutting, binding of one layer of 20 BWG galvanized wire mesh having miriam
eld strenath fy = 450 MPa & having 2 mesh per 25 mm i both way, clear cover 12 mm at
the mile ofthe ferocement lng, wth washing of sand, chipping, caning the surface,
watering, grouting, casting, laying on proper lev of oo top or Naor in panes (1-25 m x 1.25
1m), Compaction including leveling, cing atleast fr 21 days including cost of water,
‘lecricty, inal respect as pr orawing, design and acceptec by the Engnes~-charce. [PWD
W754)
an
1487.00
enn
75 mm thick ferocement treatment work for heat and water proofing on root having minivan
‘ament content relates to mx ratio 1:2 cement conforming to GDS EN-I97-L-CEN-1, 52.5%
(52.56Pa}/ASTN-C 150 type-t, and best quay coarse sand (FM. 2.2) induing, the supply
af ll mates, cutting, binding of one layer of 20 BG galvarizee wire mesh having rarimum
eld strength fy = 450 Mpa & having 2 mesh per 25mm in both ways, clear cover 2mm at
the mile ofthe ferocement lis, applying 62 mm thick ES sheet having densty 15 kg per
‘um, with washing of sand, ping, cleanng the surface, watering, groutg, casting, laying
fon proper level of root top or Roar n panes (1.25 mx 1.25 m). Compaction Including leveling,
firing atleast for 21 doy including cost of water, elect, nal respect as per drawing,
esign and accepted bythe Engineer-ircharge, [PWD 17.5.2)
can
Ta9300
[Section 23:
Pile Works And Pile Test
Baan
‘oring/ dling by wash or pe-cssion method forcast h Sa ple upto the requred depth and
ameter with minimum 6 m long temporary steel casing, tre to vercal, providing bentonite
sluy and maintaining water lve nthe hale, washing the hole for atleast 30 minutes,
‘earing the borehole and making te borehole ready for placing sted cage anc concreting
Including hire charge of rig set wth winch machine, tpod Stand, temie pipe, cast of ue,
ican, mobiaation, demobilization, maintenance, spares stand-byes, insurance coverage,
water elect ar other charges all complet, approved and accepted bythe Engineeni=
‘charge. Before commencing boring opertian, contractor shall submit te method statement of
‘asti-sit pile work induding sequence of boring an casting, disposal of spol to the
Enaincer-n-charge fr approval However, Engines’ approval shall not releve the canractor
of his responsiblites and eblgatins under contrac. . (PWD 03.1)
EEE
200 ram cis. (PHD 9-1)
795.00
EaaOLaE
50 rm dia (ND 3.12)
T0715}
EaROLOE
300 rm da (HD LS
T8600
SaROLOA
350 rm da (AND A)
T1505]
ane
BOO da AND BID)
T5705]
Baan
ThigerBana/Rotary dling Tor castn stu ple up tothe required depth and diameter with
minimum 6 m ong temporary stel casing, tru to vertical, providing bentonite ry and
‘maintaining water level inthe hole, washing the hele for atleast 30 minutes, deaning the bore
hole ane mang te bore- ole reagy for placng steel cage and concreting neuding Ne
charge of ri set , treme pipe, cast offal, lubricant, mobilization, demobization,
maintenance, spate, tand-yes, insurance coverage, bentonite, water electicty and other
charges et. complete approved and accepted by the Engineer-charge, Before commencing
boring operation, contractor shall submit the method statement of cast-in pile work
ineuding sequence of boring and casing, disposal of sols othe Enginer-in-charge fr
approval. However, Engines’ aporval shall ot reve the contractor of his responsiblites
ane eblgaons under contrac, (PWD 09.2)
Tote Rae ofa ee seul be nchsve of alauppand cara,
Pape TSH