‘Schedule of Rates, LGED, February 2023
Tom Code
Brio Description of arn
cage. [Pwo
anda
600 mm creulr da (PWD 21.140
1047000
anrae
"5 ram Greer do (PWD ALTA)
T5600
Bans
Tarafactrina, sopping, fttng end thing tel aril ending n boundary wal wih 38 mm da
MS Pipe with thickness 6 mm placed @ 150 rm cle vertically and mending geod the
damages wth C.c (1:2:4),feshng wih twe coats of panting with synthetic enamel paint
‘vera coat ofant-corosive pant et. complete as per crawing and design and accepted by
the Engineerin-charge, (Rates exuding te cost f pant) [PWD 21.15]
san
728405]
e206
‘Svpolyng iting and Ming of wooden wedge (12 mm base x 12 mm height instead of putty
for fing glass panes with wooden frame by nals r by any ether approved methad inlucing
the cost of necessary wood (Garan Jany Loca a), nal etc, all complete and accepted by
the Engineerinecharge. (Rate is exdding the cst of wenden frame, pang and 8 mam thick
ass panes) [PWD 22.1
75300]
ana
‘Supplying ting and fing of best quly of differant da foreen made aluminium pipe carta
ral for door and window induding cting and ftng-faing as per required measurement and
Supplying necessary screws SS clamp, electric dl and rowel plug nung charge of
locrcty etal complete and accepted by the Engneerin-charge [PWD 22.2],
20a
20 mm da Aluminium pipe curtain rail [PWD 22.2.1)
708.00
s20ara
25 mm da Aluminium pipe curtain rll [PWD 22.2.2)
788.00
S208
‘Sepplvng ting and Thing ferent dia best quality Staless steal (SS) pipe a5 curtain ral
for door and windows inducing cutng and ting fing as per required measurement and
Suopling heavy type SS Clamps & 2 nos SS End Caps, necessary screws, electre del and
rowel plug including charge of elect ec all complete and accepte by the Engineer
charge PWD 22.3
20084
20 mm da Staness steel (5) pipe with wall ickness 1.00 im [PWD 22.3.1)
3.00
2082
75 mim da Sales seal (5) pipe with wal hieaness 1.20 mm [PWD 2232
385.00
ante
32 mim da Staness seal (55) pipe wih wall Wiemness 120 wm [PWD 2233
5.00
ans
‘Supplying iting and Ting spedl qaly 10 mm tick car tempered glass doo: cuding al
accessors, 1 Set Noor mounted auto door closure, 2 nos. camping devies, 1 set locking
eve, top hinge and mandi et. complete inal respect as per erawing ard direction ofthe
Engineersn-charge (PWD 224]
san
T5760
2020
Supplying ting and fing best quality of diferent Wick cer glass parton with 44 rm, 48
rm, 1.5 hm aluminium box, protector bt (inal), protector bi (double), lan Including all
accessories etc. all complete and as per drawing and drecton of te Engineeri-charge (PWD
225)
20204
1 mm tek clear sass partion with aluminum Box [PWD 22.54)
sam
7942.00
20302
Tm Tick clear Gbss patton with laraniom box (PWD 2252]
sain
310600
2007
“Supplying iting and Ting of Chatiogram Teak wood Sip (62 mim x 2 mmx ZO man) for
fain of aluminium curtain vals as per design and drawing, ting and fing coat of pr ming
eal complete and accopted by the Engincerin-charge (Rate is excluding the cst of
polishing etc) (PWD 22.6}
wa.
nz
‘Sunayng iting and fining verkal venetian binds made with glass fer fares (erign
made) wth supply ofa the best qualty matenas(fregn made) such as head ral
(aluminium), end cap-set, rod Ut, sigger (stopper), runner, spacer (ink), hancling cord ball
‘han nk chain, coré-weight wghtalate laste washer, alas Aber fabrics, and head cap-st
all complete and accepted by the Enginee-n-charge, [PWD 22.7)
an
7208.5
20a
Supplying ting and fing horantal venetian Bods of 25mm wieth made with aluranium
fol sips (oregn made) with suply ofall materials (foreign made) sucr as head ral,
bottom al roe tit, ead cap, batlom cap, gear ba, stick, support and cap, caré drum ard
Suppor, bracket, core lock, cord equalizer, top holder, ladder, cord, handling cord and
aluniium fos ee all complete and accepted by the Enginesr=r-charge, [PWD 2.8)
can
1567.00
2034
‘Supplying ting snd Thing of Poizonta ebra Blind made with palester fabrics, synthetic net
vith 3 inch vnglupre coated sips (orign made) with supply fal materials (foreign mode)
Such a head ral, botom ral, rod tt, head cap, bottom cap, gearbox, stck, support and cap,
Cord drum and stpport, bracket, cord lock, cord equazer, top elder, ladder, coe, handling
{ord and aluminium Pls et all complete and accepted by the Engineerincharge, [PWD 22.9]
sam
3555]
2025
‘Supalyng ting and fing of lockout Wanslucent roller lind of PVC wn laminated
fperalass fabrics (orion made) with supply of al materials (foreign made) such 2s head ral
(aluminium), end cap-set, rod tit, siger (stopper), runnes, spacer (nk), handing cord ball
han nk chain, cord-weight we'ghtlate paste washer, las ber fabrics, and head capset
eal complete and accepted by the Engineerir-charge [PWD 22.10]
san
726075
78.05
Tote Rae ofa ee seu be weliove oa aupp and cara,eof |
Tom Goak
Brio Description of arn
Isaior
a0 re tick Concrete Sad Block wall works Paving mnmnum compressive erenath of 15
‘MPa and water absorption not greater than 79% of size (240 x 114 x 70) mm laying th
specfied morta” of cement ard sand in arti 1:5 (sand notless than FM = 1.2) ang
minimum thickness of 12 mm in foundation an pint, fling the joints interstices uly with
‘mortar, racking out the joint and curing fer minimum 3 (thre) days en mertar ont by jute
‘Totus in wet, allowed by impervious wet covering for another 4 (our) days curing ete. ll
completed by the contractor and accepted by the Engineer-in-charge. [PWD 30.1]
5785]
Sana
‘he layer of Concrete Sol Block Song having minima compressive strenath of 15 MPa and
water absorption not greater than 7% of size (240 x 114 x70) mm in ground fer! foundation
Inciudingpreparaton of bed and ilg the interstices with ne sand (FM. = 0.8), leveling et.
all completed by the contractor and accepted by the Engineern-charge. (PWD 30.2)
an
00
lsauae
7240 mm thick Exterior Wall wth Conerete Sod Block having minimum compresive strength of
15 MPa and water absorstion not greater than 7% of sze (240 x 114 x70) rm, baying with
spectied mortar of cement and sand in arti 1:5 (sand notless than .M =12) and imum
thickness of 12 re ling the interstices with mortar and making bond with cannectng walls
‘rames including necessary scaflding and curng for minimum 3 (Gree) days on mortar
Jains by ute forush in wey, flowed by impervious /wet covering for another 4 (fur) days
{ring et.al completed by contractor and accepted by the Engineern-carge, [PWD 30.3]
cere
(Groun floor [PWD 30.3.1],
3036.00
Eau
"hd foreach ad oar above ground Roar [PWD 303.2]
73.00
Loe
THA mam ick Parton Wall with Conereta Sod lock having minimum compressive rength oF
15 MPa and water absorstion not greater than 7% of sze (240x 114 x70) mm, ly with
spectied mortar of cement and sand ina ratio 1:5 (sand notes than FM =1.2) and minimum
thickness of 12 rom, fling the interstices with mortar and making Bond with connecting wal
‘rams neladieg necessary scaffolding and curng for mnirum 3 (Gree) days on mortar
Saints by Jute forash in we, flowed by impervious /wet covering for another 4 (fur) days
{ring et.al completed by contractor and accepted by the Engineer-i-charge [PWD 30.4]
aioe
Ground fear [PWD 30-4.)
an
T2700
anne
"Rad Tor each ed Moo" up above around Noor [PWD 304.2)
an
3500
sans
7240 rm tick Exterior Wall wth Concrete Rollo Block having minimum compressive srenath
Of 15 Ma of size (390 x 190 x240) mm thickness of individual Block Shell should not be less
‘than 32 men, water absorption nat more than 7%, laying with speciee mortar of coment and
sand ina rato 1:4 (sand not less than FM =1.2) and minimum thickness of 15 men (9 mm for
Shell porson and 6 mm for side hollow parton, filing th interstices with mortar and making
bond with connecting wal frames including necessary scafflding and curing for minimum 3
(Ghee) days on mortar joints by jute brush in wet, fllowed by impervious /wet covering for
another 4 (fou) days curing ete all completes by contractor and accepted bythe Engineer
hargesPD 30.5),
Eee
(Groun foor [PWD 30.5.1)
san
7898.00
anos
"hd for each ad Haar up above ground Roor [PAD 306]
an
36.00
cer
T12 mim Shek Parton Wall with Coneeta Haliow Sock having munimum compresive avenath
of 15 Ma of size (390 x 190 x 112) mm, thickness of wdvial Block Stall shou not be less
than 25 mm, water absorption nat mere than 73, laying with spedied mortar of cament and
Sand ina ratio 1 (san not lss than FM =1.2) minimum thickxess of 15 ram (9 mm for shell
potion and 6 mm for nie halo potion), ila the interstices wth mortar and making bond
with connecting walls /rames inducing necessary scaffolding and curing for minimum 3
(three) days on mortar jt by jute orush in wet, followed by imperious /wet covering for
another 4 (fou) days ering teal completed by contractor and accepted by the Enginer-in-
barge PWD 30.5)
sai06a
Ground floor [PWD 30.6.1)
an
397.00
an n6e
TRA foreach ed Moo" up above around Noor [PWD 3062
an
3500
lsano7
7A0 ra Wick Exterior Wall vith 3 Holes Concrete Hollow Bloc having ainmum compresave
Strength of 15 MPa and water absorption net great than 7% of siz (240 x 114 70-3H)
nm, lay with speed mrtar of cement and sand in 2 rato 1:5 (Sand nat less than FM
2) and minim thickness of 12 rm, filing the interstices with mortar ard maka bond
with connecting walls /rames inducing necessary scaffolding and curing for mir 3
(three) days on mortar joints by Jute orush in wet followed by imperious /wet covering for
another 4 (fou) days curing teal completed by contractor and accepted by the Enginer-in-
brarge [PWD 30.7)
eaLo7
Ground floor [PWD 30.7.1)
77a
Lara
"Rad foreach ed Moo" up above around Noor [PWD 307.2)
7a}
[sane
14 mam Hck Parton Wall with 3 Hols Concrete Hallow Block having maimum compressive
strength of 15 MPa and wate absorption not greater than 7% of siz (240 x 114 x 70-34)
nm, lyin wih spied marta of cement and sand in a rato 1:5 (Sand nat ess than FM
) and minimum thickness of 12 mm, fling the nerstices with mtar and making bond
Tote Rae ofl ee seul be wehisve oa supp and aa,eof |
Tom Goak
Brio Description of arn
with connecting walls [ames nding necessary scaffolding and canng for mininam 3
(@hree) days on mortar jnts by jute brush in wet, followed by imperious /wetcoverng for
another 4 (fou) days curing ate all completed by contractor and accepted by the Engineer
charges PWD 30.8).
aioe
Groune fear [PWD 30.8.1)
san
709800
a0
"Rd for each ad fear up above around feor [PWD 30.82
a
36.00
aay
"a0 mm thick Bovadary Wall with Concrete Sold Bloc having minimum compressive srenath
of 15 mPa and water absoraton not greater than 7% of sze (240 x 114 x70) mm, lying with
Specfed mortar of cement and sand ina rato 1:5 (sand notless than FM =1.2) and minimum
thicknes of 12 re, fling the interstices with mortar and making Bond with connecting walls
‘frames ncading necessary scaffelaing and cung for minimum 3 (tee) days on mortar
Joints by jute rush in wet, flowed by imperious /wet covering for another 4 (our) days
{ring tall camplete by contractor and accepted by the Engineer-n-charge. [PWD 30°]
‘36.5
santo
1 mim thick boundary wall with Concrete Sold block having minimum compressive length
of 15 mPa and water ebsorgton not greater than 7% of se (240 x 124 x70) rm, lying with
Spectied mortar of cement and sand ina ratio 1:5 (sand notless than F.M= 1.2) and minimum
thickness of 12 rom, fling the interstices with mortar and making Bond with connecting wale
‘Mrames neludieg necessary scaffolding and curng fr mrirum 3 (twee) days on mort
Sein by ute forash in we, flowed by impervious /wet covering for another 4 (fur) days
ting all campleted by contactor and accepted by the Eninee-in-charge[PWD 30.10}
a
T2700
EErary
7240 me thick Boundary Wall wth Concrete Hallow Block having mannum compressive
Srrength of 15 MPa of se (290 x 190 x 240) mm, thisness of indical Block Shell should not
be ess than 32 mm, water absorption not more than 7%, laying with speced mortar af
‘cement and sand in rato 1:4 (Sand nt less than FM =1.2) and mnimum thickness of 15
tim (9mm fr shel portion and 6 mm for inside low norton), fllng the interstices with
‘mortar and making bond with connecting wals frames induing necessary scaffelding and
tring for minimum 3 (thee) days on marta jens by je brush n wet, followed by
Impervious wet covering fr another 4 feu) days curing ec al completed by contactor and
accepted by the Engineer ivcharge [PWD 30.11]
a
199800
aia
712 mm tek Boundary Wall with Concete Hollow Block having minimum conpresave
strength of 10 MPa of sie (290 x 190 x 112) my thickness of india Block Shell should not
be less than 25 mm water absorption not more than 7%, laying with specified mortar of
Cument and sand in aio 14 (Sand not less than FM =1.2) micimum thickness of 15 mm (3
frm for shel peréon and 6 mm fer inside Follow portion) fling the interstices wth mertar and
‘making bond wth connecting wals ames including necessary scaffolding and curing for
‘minimum 3 (tree) cays on mortar jats by jute rush n wet, flowed by imperius /wet
‘verng for another 4 (our Says curing et all completed by contractor and accepted by the
Engineern-charge(PWD 30.12),
san
387.00
Isai
240 re thick Boundary Wall with 3 Holes Concrete Hollow Block having minimum compressive
Strength of 15 MPa of size (240 x 114 x 70 -3H) mm, thickness of individual lock Shel should
ot Beles than 32 mm, water absorption not more than 7%, lying wih specified mortar of
{ement and sand in ato 1:4 (sand nt less than FM =1,2) ard morimum duces of 15,
tn (9 men for shell potion and 6 mm for inside hollow porton), fllng the interstices with
‘mortar 3nd making bond with connecting wal frames induding necessary scalding and
{ring for minimum 3 (three) days on marta joints by je /bruh in wet, followed by
Impervious /wet covering for another 4 four) days curing ec all completed by contractor and
accepted by the Engineer-ivcharge,PWD 30.13)
77300
sana
714 mm thick Boundary Wall with 3 Poles Concrete Ralow Black having minimum compressive
strength of 10 MPa of size (240 x 114 x 70~3H) mi, thickness of indivdual Block Shell should
ot Beles than 25 mm water absorption not more than 7%, lying wih specified mortar of
fement an sand in 9 vatioT4 (Send not less than FM =1,2) mmm theeness of 15 mm (3
‘nm for shel portion and 6 mm for inside hollow portion) fling the interstices wth mortar and
‘aking bond with connecing wals frames including necessary scaffolding and curing for
‘minimum 3 (roe) cays on mortar jit by Jute rush in wet, flowed by imperious /wet
‘overng for aneter 4 (our) cays curing et. all completed by contractor and accepted by the
Engineern-charge(PWD 30.14]
wan
709800
lsanas
T12 mm tek partion wall with sand cement hollow bloc wal (SCH) Raving compressve
strength of not es than 10 Mp, size (380 x 190 x 112) mm, thickness of individual Block
shell should not be les than 25 rm, water absorption not mere than 73, lying with specified
‘mortar (with admire) of cement and sand ina ratio of nt less than 115 (sand not less than
FM = 1.2) fling the ntestices wth mortar and making bond wih connecing walls inducing
recessary saffoling and curing for minimun 14 days on mortar joints by Sue /orush in wet,
followed by impervious /wet covering for another 7 Gays cluding cost of water, elecricty and
other charges etc in all completed by the contractor and accepted by the Enineerin-
rarge {PWD 30.15)
Ground Floor [PWD 30.15.)
an
34.00
"Rad foreach ediional oor above pound floor [PHD 30.152]
ain
36.00
Tirana 10 rm ick coment plaster n coment sand = 15 suace of exeralintemal
wall itn spect externa/ntral plaster mx apple in wo coat (frst coat 6 mm and
Tote Rae ofl ee seul be nehisve oa supp and cara,‘Schedule of Rates, LGED, February 2023
Tom Code
Brief Description of tern
Second coat 4 ran), rstng the come” and edge mdvng washing of sand, leaning the
Surface, scalding and cng for mmun 3 (¥ree) cays on mortar joints by jue/orush in
wet, followed by impervous/wet covering for another 4 (our days ee. all complete et.al
‘complete and accepted by the Engines-n-charge, (Rate Is excluding the cost of routing and
Feipforcerment) [PHD 30.16]
EE
‘Ground oor (PWD 30.16.)
san
7A)
eaii62
‘hd foreach sdional floor above ground foor (PHD 30.162]
aan
605]
ana?
‘Supplying and placing of erey engraved cement concrete Bes (250 mmx 250 mmin ze)
having mirimum tckness of 24 mm over 12 mn sand cement mortar (4:1) each at a stance
(of 6 mm apart an flog the joints with cement sand mortar (1:4) indding raking cut joints
land cutting the tes to required sizes wherever necessary with nigh cles recessed pointing,
‘earing anc washing of sand, curing for mirimun 3 (Bree) days on mertar Joints by Ae
rush in wey, fllonee by impervious [wet caverng for another (fur) days et.al complete
and accepted by te Engineein-charge PWD 30.35.
Ear
Ground oar [PWD 3035.1]
oD
354.00
pair
‘hd foreach aditional oor above ground Noor [PWD 3035.2]
an
70.05]
Sante
‘Supplying and plbcng of coloured engraved cement concrete Wes (50 mm x 250 rm ih 58)
having miimum thisiness of 24 mm over 12 mm sand cement mortar (41) each ata stance
{of Gm apart and flog the fonts wth cement sand mortar (1:4) nding raking out joints
land cling the testo required szes wherever necessary with high ss recessed pointing,
‘Searing anc wasting of sand, curing for mn 3 (thee) days an marta ants by jte brush In
wet, flowed by impervious fet covering for another 4 (our) days et, all complete and
accepted by the Ergineer-in-harge [PWD 30.35.2]
sande
Ground oor [PWD 30352.1]
a
109800
nie
"hd Yor each wdivonal oor above Ground Noor [PWD 3052.2]
an
T00}
Corry
38 mm thick grey dading workin facng on superstructure wth 200 im x90 men 38 mm
Sze concrete cat peste with 20 mm thick cement mortar (1:4) tobe placed at 6 mm apa,
filing the interstices with same mortar, raking aut ots and cutting te clad ta requred sizes
wherever necessary wth high cass recessed pointing, cleaning and washing of sand,
necessary scaffolng, curing for minimum 3 (thre) days on mortar ont by je brush in
wet, followed by impervious fet covering for anothe 4 (Tour) days et.al complete and
accepted by the Engineer in-charge PWD 30.36.)
Banta
‘Ground Hoor [PWD 30.36.11
san
1568.0
52192
"hdd foreach adtional oar above ground oar [PWD 3036.2]
wan
78.05]
5 2n20
7 mm Tick coloured daddng work is Toca on supersracre wih 200 mmx SZ Fem 38
im size concrete clad peste with 20 mm thick cement mertar (1:4) tobe place at 6 mm
apart, fling the iterstices with same mortar, raking ut joints ad cutting the clad to required
Sires wherever necessary with high clas recessed poting, cleaning and washing of sane,
reoessary satfolin, curing for minimum 3 (Ue) days on mata ont by Ae [BUS
wet, Followed by inpervus /wet covering for another 4 (Tour) days et. alleamplete ard
accepted by the Ergineer-in-charge [PWD 30.36-2)
sanz
CGroune for [PWD 30.362.1]
an
1695.0
enzo
"Rd foreach adtonal oor above Ground Noor [PWD 303622]
san
1805}
‘30 man tek grey dadaing work Tadng on suparsiactre with 400 mx 100 mx 50
Size concrete at peste with 20 mm thick cement morta (1:4) tobe placed at 6 mm apart,
fing the interstices with same morta, aking out ents and cutting te clad to requred sizes
wherever nocessary wih high dass recessed point, clearing and washing of sand,
necessary saffoling, outing for minimum 3 (thee) days on mortar joints By jte brush in
wot, followed by inperveus /wet covering for another 4 (our) days et, all complete and
accepted by the Engineer in-charge [PWD 30.36.3]
anata
‘round for [PWD 30363.1]
sa
14.09]
ara
Thad Tr each adional oor above ground Hoar
EEE
sam
TH]
Baia
50 mm tick coloured daddng work in fecng on supersracare with 400 mm x 100 min x50
rm size concrete clad peste with 20 mm thick cement mertar (1:4) tobe place at 6 mm
par, fling the interstices with sae mortar, raking out jon and cuting the lad to required
Sizes wherever necessary with high clas rectssed pointing, cleaning and washing of san,
necessary scaffolding, curing for minimum 3 (tre) days on mortar ont by je [brush in
te, flowed by inper vous fet covering for another # (our) days et, al complete and
accepted by the Engineer in-charge PWD 30.3644)
sanz
‘Ground oor [PWD 3036471
wan
745900
aia
"hd foreach adtonal oor above ground foar [PWD 3036427]
wan
78.05}
ana
Tm thick ore ccloured dacdng wark hs fadg on superstructure wih 420 men x 330 mm
X15 mim sire concrete ld peste with 20 mm thick cement mata (1:4) to be placed at
Tote Rae ofl ee seul be welisve of al sup and cara,eof |
Tom Goak
Brio Description of arn
Tam apary fling the intetices with same mora, raking oat jonts and cuttng the dad to
Fequred szes wherever necessary wth high class recessed porting, cleaning and washing of
Sang, necessary scaffolding, curing for mivimum 3 (thre) days on mortar nts by jute /orush
in wet, followed by impervious wet covering fr another 4 (fou) days etc, al complete and
accepted by the Engineer in-charge [PWD 30.365],
Een
‘Ground floor [PWD 30.365.1]
=a
e2n732
‘hdd foreach sdiional oor above ground Noor (PWD 3036521
aan
1805]
Isai
740 rm tick wall n super structure wth Aitoclaved Aerated Concrete (RAC) Bock of size
(600 x 200 «240 : xx W) mm having Compressive Stenath not less than 6 MPa, Nominal
Dry Dersity 850 ka/m3 and Drying Srrkage not exceeding 0.02% conforming BNBC-2020,
(ASTM C1386), laying wth specified mara of cement and sendin a ratio 1:4 (sand not ess
than. =1.2) and minimum thickness of 10 ran, (or ober binding materiale which comely
vith BN3C-2020) fling the interstices wth mertar and making bond wh connecting wall
‘Mrames ncuding necessary scafolding and eurng for mirvmum 3 (twee) days on mortar
Sein by jute foash in wet, flowed by impervious /wet covering for another 4 (fur) days
{ring et, all completed bythe contracor and accepted by the Engineer n-charge,[PWD
Soar
Baza
(round too (PWD 303711
395200
i282
"Rd foreach adtonal oar above ground foor [PWD 3037.12]
73.00
sana
205 mm tick wall n super aucture wth Aadlaved Aerated Concrete (RAC) Bock of size
{600 x 200 «200 : Lx # x W) mm having Compressive Strength not less than 6 MPa, Nominal
Dry Deasity 850 ka/n3 and Drying Shrinkage not excseding 0.02% conforming BNBC-2020,
(ASTM C1386), laying weh specfied morar of cement and sand in arto 1:4 (sand not ess
than F. =1.2) and mnimum thickness of 10 ram, (or ober binding materas which comply
vith 8N9C-2026) fling the interstices wth mertar and making bond wih connecting wall
‘ames ncidig necessary scaffolding and eurng for mrwrum 3 (twee) days on mortar
Jains by Jute /orash in we, flowed by impervious /wet covering for another 4 (fur) days
{ring et. all completed by the contractor and aocepted by the Engineer n-charge [PWD
soa721
Basa
(Ground fear PD 30.372 1)
wi800
cEeE
"Rd for ach adtonal oor above ground Noor [PWD 303722]
73.00
Banas
150 mim Uvek wal in Super sruclure with Aocaved Aerated Concrete (AAC) Block of sue
(600x200 « 150: Lx Hx W) mm having Compressive Strength not less than 6 MPa, Nominal
Dry Denslty 850 kg/m3 and Drying Shrinkage not excoeding 0.02% conforming BNBC-2020,
(ASTM C1386), laying wth specified morar of cement and sand ina ratio 1:4 (sand not ess
than F.6 =1.2) and menimum thickness of 10 mm, (or ater binding mates which comply
vith BNBC-2020) fling the inlesices wth mertar and making bone wih connecting walls
[frames inching necessary scaffolding and curng for misimum 3 (thee) days on mortar
Jonts by jute brush in wet, followed by imperious /wet covering for another 4 (our) days
{ring et.al completed bythe contracor and accented by the Engineer n-charge [PWD
5037.31
aise
Ground foar [PWD 303731]
77a
nz62
"hd foreach aditional oor above Ground Noor PD 30.37 32]
73.00
ana
"a0 rey tick wall n super druclure wth Rodaved Aerated Concrete (RAC) Bek of are
(600 x 200 «240 : Lx Hx W) mm having Compressive Strength not less than 6 MPa, Nominal
Dry Density 850 kg/m and Drying Shrinkage not exceeding 0.02% conforming BNBC-2020
(STH C1386), laying wth approved polymer medified adhesive mortar having water retention
ot ess than 75% & average compressive strength at 28 days, min 5-2 MPa cenforming ASTM
270, Spitting Tense Svength not less than (0.40 ~ 0.49 MPa) conforming ASTM C1660,
mataining Wp ratio 25% - 30% and jointing adhesive mortar ayer thickness of (3 mm -4
mm), (or othe binding materials which comply wrth ENEC-2020) fling the interstices wth
‘mortar and making bond with connecting wals frames inducing necessary scaffolding, cuting
ane sing AAC blocs ec all completed by the conractor and scaepted by te Engineer
charged PWD 30.381),
sana
(Ground foor [PWD 3038.71
W440
Lara
"hd foreach adtional oar abave ground Noor [PWD 3038.17]
73.00
Sahae
7 re tick wall n super aucture wth Aodlaved Aerated Concrete (RAC) Boek of size
(600 x 200 «200 : Lx # x W) mm having Compressive Stenath not less than 6 MPa, Nominal
Dry Dersty 850 kn/m3 and Drying Srrkage not exceeding 0.02% conforming BNBC-2020
(ASTM C1386), laying wth approved polymer modified adhesive mortar having water retention
otless than 75% 8 average compressive strength at 28 days, min 5.2 MPa conforming ASTM!
270, Spitting Tense Strength not iss than (0:40 - 049 MPa) conforming ASTM C1660,
‘mataining Wip ratio 258 ~ 30% and Jlting adhesive mortar ayer tckness of (3 mam -4
mm), (or othe binding materials which comply wth ENEC-2020) fling the interstices wth
‘mortar and making bond with cannectng walls ames inducing necessary scaffolding, cuting
and sirng AAC blocs etc all completed by the contactor and accepted by te Engineer
Tote Rae ofl ee seul be wehisve oa supp and aa,eof |
Tom Goak
Brief Description of tern
Grarge (PND 3038.2],
sanz
Ground floor [PWD 3038.21]
9200
"hdd Yr each edavonal Toor above Ground Noor [PWD 30822)
73.00
EEE
"50 my tick walln Super sucture with RuRodaved Aerated Concrete (RAC) Blak o are
(600 x 200 x 150: Lx Hx W) mm having Compressive Strength not less than 6 MPa, Nominal
Dry Density 850 ka/3 and Oring Shrinkage not exceeding 0.02% conforming BNBC-2020
(STM C1386), laying wth aporoved polymer modified adhesive mortar having water retention
fot ess than 75% & average compressive strength at 28 days, min 5.2 MPa conforming ASTM
C27 Spitting Tense Strength not less than (0:40 = 049 MPa) conforming ASTM C1660,
maitaning Wip ratio 25% - 30% and joining adhesive mortar ayer thickness of (3 mm ~4
mim), (or othe binging materials which comply wrtn BNBC-2020) fing the interstices wth
‘mortar and making bond with connecting wals/rares induding necessary seafoliing,cuting
and sing AAC blocs etc. all completed by the contractor and accepted by te Engineer
charges PWD 30.383),
1204
Ground fear [PWD 303831]
7a
222
"hd for each adtonal oor above ground Noor [PWD 3038.32]
73.00
ISection 22
+ Heat and Water Proofing Works (Roofs)
azo
75 mm tk Terrocarien eaten wrk or wator proofing on rot aving unum cariane
{pte relates to mx rato 1:2 cement conforming to BOS EN-197-1-cEM, 52.5N
(62.5mPa)/ASTN-C 150 type-1, and best quay coarse sand (FM 2.2) induding, te supply
Gf all materials, cutting, binding of one layer of 20 BWG galvanized wire mesh having miriam
eld strenath fy = 450 MPa & having 2 mesh per 25 mm i both way, clear cover 12 mm at
the mile ofthe ferocement lng, wth washing of sand, chipping, caning the surface,
watering, grouting, casting, laying on proper lev of oo top or Naor in panes (1-25 m x 1.25
1m), Compaction including leveling, cing atleast fr 21 days including cost of water,
‘lecricty, inal respect as pr orawing, design and acceptec by the Engnes~-charce. [PWD
W754)
an
1487.00
enn
75 mm thick ferocement treatment work for heat and water proofing on root having minivan
‘ament content relates to mx ratio 1:2 cement conforming to GDS EN-I97-L-CEN-1, 52.5%
(52.56Pa}/ASTN-C 150 type-t, and best quay coarse sand (FM. 2.2) induing, the supply
af ll mates, cutting, binding of one layer of 20 BG galvarizee wire mesh having rarimum
eld strength fy = 450 Mpa & having 2 mesh per 25mm in both ways, clear cover 2mm at
the mile ofthe ferocement lis, applying 62 mm thick ES sheet having densty 15 kg per
‘um, with washing of sand, ping, cleanng the surface, watering, groutg, casting, laying
fon proper level of root top or Roar n panes (1.25 mx 1.25 m). Compaction Including leveling,
firing atleast for 21 doy including cost of water, elect, nal respect as per drawing,
esi and accepted bythe Engineer-ircharge. [PWD 17.9.2)
can
Ta9300
[Section 23:
Pile Works And Pile Test
Baan
‘oring/ dling by wash or pe-cssion method forcast h Sa ple upto the requred depth and
ameter with minimum 6 m long temporary steel casing, tre to vercal, providing bentonite
sluy and maintaining water lve nthe hale, washing the hole for atleast 30 minutes,
‘earing the borehole and making te borehole ready for placing sted cage anc concreting
Including hire charge of rig set wth winch machine, tpod Stand, temie pipe, cast of ue,
ican, mobiaation, demobilization, maintenance, spares stand-byes, insurance coverage,
water elect ar other charges all complet, approved and accepted bythe Engineeni=
‘charge. Before commencing boring opertian, contractor shall submit te method statement of
‘asti-sit pile work induding sequence of boring an casting, disposal of spol to the
Enaincer-n-charge fr approval However, Engines’ approval shall not releve the canractor
of his responsiblites and eblgatins under contrac. . (PWD 03.1)
EEE
00 ram cia (PHD OS.)
795.00
EaaOLaE
or
DAD)
T0715}
EaROLOE
D0 en ia (PWD 0.1.3
T8600
SaROLOA
350 rm da (AND A)
T1505]
ane
BOO da AND BID)
T5705]
Baan
ThigerBana/Rotary dling Tor castn stu ple up tothe required depth and diameter with
minimum 6 m ong temporary stel casing, tru to vertical, providing bentonite ry and
‘maintaining water level inthe hole, washing the hele for atleast 30 minutes, deaning the bore
hole ane mang te bore- ole reagy for placng steel cage and concreting neuding Ne
charge of ri set , treme pipe, cast offal, lubricant, mobilization, demobization,
maintenance, spate, tand-yes, insurance coverage, bentonite, water electicty and other
charges et. complete approved and accepted by the Engineer-charge, Before commencing
boring operation, contractor shall submit the method statement of cast-in pile work
ineuding sequence of boring and casing, disposal of sols othe Enginer-in-charge fr
approval. However, Engines’ aporval shall ot reve the contractor of his responsiblites
ane eblgaons under contrac, (PWD 09.2)
Tote Rae ofa ee seul be nchsve of alauppand cara,
Pape TSH