Professional Documents
Culture Documents
Cosonic (SMD) V Series
Cosonic (SMD) V Series
TYPE V
SURFACE MOUNT TYPE, 85℃ 2000 HOURS
SPECIFICATIONS:
Item Characteristic
Operating Temperature
-40℃ to +85℃
Range
Capacitance tolerance ±20% at 120 Hz, 20℃
Leakage Current I≦0.01CV or 3μA , whichever is greater, measured after 2 minutes application of
(I=DC Current in μA max.) rated working voltage. Where, C =Rated Capacitance (μF)
V =Rated Working Voltage (V DC)
Dissipation Factor ( tanδ) W. V. 6.3V 10V 16V 25V 35V 50V 63V 100V
max at 120 Hz, 20℃ Tanδ(max) 0.28 0.24 0.20 014 0.12 0.10 0.10 0.10
Impedance Ratio at W.V. 6.3V 10V 16V 25V 35V 50V 63V 100V
Low Temperature at 120 Hz Z@ -25℃ / Z@ +20℃ 4 3 2 2 2 2 2 2
Z@ -40℃ / Z@ +20℃ 8 5 4 3 3 3 3 3
Load Life Test The capacitor shall meet following limits:
(restored to 20℃, after 2000 Capacitance Change ≦±20% of initial value
hours application of the rated Leakage Current ≦ specified maximum value
voltage at 85℃) Dissipation Factor ≦ 200% of specified maximum value
Shelf Life Test
(after 1000 hours exposing
Same test results as of load life test
at 85℃ without voltage
applied)
w.v. Freq 50 Hz 120 Hz 1KHz 10KHz up
Under 16V 0.8 1.0 1.15 1.25
Ripple Current &
Frequency Multipliers 25V~ 35V 0.8 1.0 1.25 1.40
50V ~ 63V 0.8 1.0 1.35 1.50
100V 0.7 1.0 1.35 1.50
Standards Satisfies Characteristic of JIS C 5101-1, -18
EC-48
ALUMINUM ELECTROLYTIC CAPACITOR
TYPE V
SURFACE MOUNT TYPE, 85℃ 2000 HOURS
Unit: mm
ψD L A B C W P±0.2
8 6.5±0.3 8.4 8.4 3.0 0.5 TO 0.8 2.3
8 10±0.5 8.4 8.4 3.0 0.7 TO 1.1 3.1
10 10±0.5 10.4 10.4 3.3 0.7 TO 1.1 4.7
CASE SIZE (DxL mm) AND PERMISSIBLE RIPPLE CURRENT (mA rms, at 85℃ 120 Hz):
W.V. 6.3V 10V 16V 25V 35V 50V 63V 100V
μF DxL R.C. DxL R.C. DxL R.C. DxL R.C. DxL R.C. DxL R.C. DxL R.C. DxL R.C.
10 8X6.5 75 8x10 94
22 8x6.5 155 8x10 139 10x10 189
33 8x6.5 155 8x6.5 155 8x10 139 10x10 189
47 8x6.5 155 8x6.5 155 8x10 252 10x10 226
68 10x10 226
100 8x6.5 155 8x6.5 155 8x6.5 155 8x10 252 10x10 458
220 8x6.5 155 8x6.5 155 8x10 252 8x10 252 10x10 458
330 8x6.5 155 8x10 252 8x10 252 10x10 458
470 8x10 252 10x10 458 10x10 458
1000 10x10 458 10X10 458
EC-49