Professional Documents
Culture Documents
Brochure Liebherr HS885 HD
Brochure Liebherr HS885 HD
ÑÑÑ
Ñ
Dimensions
Basic machine with undercarriage
Ñ
Ñ
ÑÑ Ñ
Ñ
Ñ
3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.)
Total weight approx. 106.8 t must be deducted from the gross lifting capacity to obtain a net lifting
value.
Ground pressure 4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must
Ground bearing pressure 0.98 kg/cm2 be deducted to get the net lifting capacity.
5. For max. wind speed please refer to lift chart in operator’s cab or
Equipment manual.
Main boom max. length 74 m 6. Working radii are measured from centre of swing and under load.
Fixed jib (No. 0806.xx) 11 m – 32 m
Universal boom head with interchangeable rope pulleys. 7. The lifting capacities are valid for 360 degrees of swing.
Modular designed equipment for operation as crane, with dragline or 8. Calculation of stability under load is based on ISO 4305 Table 1 + 2,
clamshell. tipping angle 4º.
For dragline operation, a rotating fairlead is fitted into the boom foot.
This minimizes the rope angle to drum, which results in lower rope 9. The structures are calculated according to F.E.M. 1.001 – 1998
wear. (EN 13001–2 / 2004).
2 HS 885 HD
Transport dimensions and weights
Basic machine and boom (No. 1515.xx)
Basic machine
ÑÑÑ
with HD undercarriage, V–8–Liebherr diesel engine, 2 x 300 kN winches
with change gear box, without counterweight, boom foot and A–frame
Double grouser track shoes mm 800 900 1000
Width mm 3720 3820 3920
Weight kg 68500 69300 70200
Ñ A-frame
Ñ Width
Weight
mm
kg
600
2195
Boom foot
Ñ Width
Weight*
mm
kg
1660
2070
Boom section 3m
Width mm 1660
Weight* kg 770
Boom section 6m
Width mm 1660
Weight* kg 1240
Boom section 12 m
Width mm 1660
Weight* kg 2130
Boom head B A
Width mm 780 1070
Weight* kg 1500 1800
L - boom head
Width mm 1660
Weight* kg 1170
*) Including pendant ropes
HS 885 HD 3
Transport dimensions and weights
Fixed jib (No. 0806.xx)
Counterweight
Add. counterweight 1x
Width mm 660
Weight kg 4500
Add. counterweight II
Add. counterweight II 2x
Add. counterweight III
Width mm 340
Weight kg 2600
Hooks
Ñ
Width mm 320
Weight kg 1400
30 t single hook
Width mm 400
Weight kg 400
4 HS 885 HD
Technical description
Control
Swing The control system – developed and manufactured by Liebherr – is
designed to withstand extreme temperature changes and the rough heavy
Consists of rollerbearing with external teeth for lower tooth flank pressure, duty tasks common in the construction industry. Complete machine
fixed axial piston hydraulic motor, spring loaded and hydraulically released operating data are shown on a high resolution display. The crane is
multi–disc holding brake, planetary gearbox and pinion. equipped with proportional control for all movements, which can be carried
Swing speed from 0 – 3.5 rpm continuously variable, selector for 3 speed out simultaneously.
ranges to increase swing precision. Dragline operation: A special ”Interlock” control system is an option
Standard: available. It is designed for power lifting of the dragline bucket without
Second swing drive using the drag winch brake.
On request, Liebherr also offers special custom designed control systems
for free fall winches.
Operation: Left joy stick for boom winch and swing, right two directional
levers for winch I and II. Crawler control is actuated with the two central foot
pedals. Additionally, hand levers can be attached to the pedals.
Options:
Noise emission F Special demolition control system
F MDE: Machine data recording
Noise emissions correspond with 2000/14/EC directive on noise emission F PDE: Process data recording
by equipment used outdoors. F GSM modem
HS 885 HD 5
Dragline equipment
32.5 t counterweight
Working diagram
C = Radius / dumping radius
J = Height of boom head sheave centre
above ground level
ÑÑÑ
Ñ
6 HS 885 HD
Clamshell equipment
32.5 t counterweight
Working diagram
C = Radius / dumping radius
J = Height of boom head sheave centre
above ground level
K = Length of clamshell (depending on type
and capacity of bucket)
Ñ Ñ
HS 885 HD 7
Equipment
Casing oscillator and slurry wall grab
Ñ Ñ
Ñ Ñ ÑÑÑ
ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ
Ñ
ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ
Casing oscillator Slurry wall grab
Winch options 2 x 250 kN 2 x 300 kN Winch options 2 x 250 kN 2 x 300 kN
Line speed 1st gear (m/min) 0–69 0–55 Line speed 1st gear (m/min) 0–69 0–55
Line speed 2nd gear (m/min) 0–123 0–119 Line speed 2nd gear (m/min) 0–123 0–119
Drilling diameter 2500 mm 3000 mm Max. chisel weight 20 t 25 t
Maximum allowable weight in Maximum allowable weight in
two rope operation 28 t 31.3 t two rope operation 28 t 31.3 t
8 HS 885 HD
Equipment
Dynamic soil compaction
Ñ
ÑÑ
HS 885 HD 9
Working range - main boom 82° - 15°
32.5 t counterweight
Ñ
Auxiliary jib 30 t
Ñ
The maximum capacity of
the auxiliary jib is 30 t.
Ñ
Ñ
ÑÑ
10 HS 885 HD
Lift chart for main boom (No. 1515.xx)
32.5 t counterweight
Capacities in metric tons for boom lengths (11 m – 74 m) – with 300 kN winches
Boom length in (m)
Standard boom head L – boom head
Radius 11 14 17 20 23 26 29 32 35 41 47 50 56 59 62 68 74 Radius
(m) t t t t t t t t t t t t t t t t t (m)
3.8 120.0 3.8
4 120.0 120.0 4
5 108.9 107.5 104.4 5
6 80.4 80.5 80.5 78.9 77.2 75.1 6
7 63.4 63.5 63.6 63.6 62.8 61.6 60.3 58.8 7
8 52.1 52.2 52.3 52.2 52.2 51.8 50.8 49.8 48.9 46.6 8
9 44.0 44.2 44.2 44.2 44.1 44.0 43.8 42.9 42.1 40.5 38.5 9
10 37.9 38.1 38.2 38.1 38.0 37.9 37.8 37.6 36.9 35.5 34.0 33.2 10
12 29.3 29.6 29.7 29.7 29.6 29.5 29.3 29.2 29.0 28.1 26.9 26.3 25.1 16.5 14.4 10.5 12
14 23.9 24.0 24.0 23.9 23.8 23.7 23.5 23.3 23.0 22.0 21.5 20.4 14.4 13.0 9.5 4.7 14
16 20.0 20.0 19.9 19.8 19.6 19.5 19.3 18.9 18.4 17.9 16.9 12.9 11.4 8.3 3.9 16
18 16.8 16.9 16.8 16.7 16.6 16.4 16.3 15.9 15.5 15.1 14.3 11.6 10.2 7.4 3.2 18
20 14.5 14.5 14.4 14.2 14.1 13.9 13.5 13.1 12.9 12.1 10.4 9.2 6.5 2.5 20
22 12.5 12.5 12.3 12.2 12.0 11.6 11.2 11.0 10.4 9.7 8.2 5.6 1.8 22
24 10.9 10.9 10.8 10.6 10.4 10.1 9.7 9.5 9.0 8.5 7.2 4.6 1.1 24
26 9.5 9.5 9.3 9.1 8.8 8.4 8.1 7.7 7.3 6.5 3.7 26
28 8.3 8.2 8.0 7.7 7.3 7.0 6.6 6.2 5.7 2.8 28
30 7.3 7.2 7.1 6.7 6.3 6.1 5.7 5.3 4.9 30
32 6.4 6.2 5.9 5.5 5.3 4.9 4.5 4.1 32
34 5.5 5.2 4.8 4.6 4.1 3.8 3.3 34
36 4.5 4.1 3.9 3.5 3.2 2.6 36
38 3.9 3.6 3.3 2.9 2.6 1.5 38
40 3.4 3.0 2.8 2.4 2.1 40
42 2.6 2.4 2.0 1.7 42
44 2.1 1.9 1.5 1.3 44
46 1.7 1.6 1.1 46
48 1.2 48
Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator’s cab or manual.
L - boom configuration
Configuration for boom lengths (59 m – 74 m)
Length Amount of boom extensions
Boom foot 4.0 m 1 1 1 1 1 1
Boom extension 3.0 m 1 1 1
Boom extension 6.0 m 1 1
Boom extension 12.0 m 4 4 4 4 5 5
L – boom head 7.0 m 1 1 1 1 1 1
L – boom length in (m) 59 62 65 68 71 74
HS 885 HD 11
Working range - fixed jib (No. 0806.xx) 15° and 30°
Main boom 80° - 30°
Ñ
Ñ
Ñ
Ñ
Ñ
12 HS 885 HD
Lift chart - fixed jib (No. 0806.xx)
Offset 15°
Capacities in metric tons with fixed jib (No. 0806.xx) 32.5 t counterweight. Above lift chart is for reference only. For actual lift duty please refer to lift chart
in operator’s cab or manual.
HS 885 HD 13
Lift chart - fixed jib (No. 0806.xx)
Offset 30°
Capacities in metric tons with fixed jib (No. 0806.xx) 32.5 t counterweight. Above lift chart is for reference only. For actual lift duty please refer to lift chart
in operator’s cab or manual.
14 HS 885 HD
Notice
HS 885 HD 15
HS 885 HD – 10099246 – 10/2007 Subject to change without notice.