Thank you for purchasing the Torbridge Cull Last Hearth Inn
General Information The Last Hearth Inn is a five story inn
complete with a large tavern, multiple rooms Prints: 25 + 22 doors and hallways, exterior balconies, and even a hidden attic. The inn is designed to be used Dimensions: with the other buildings in the Last Hearth With facades = 14 ½ ” wide x 10 ½ ” deep x Inn core set (the Hotel and the Guest House), 15” high but it can be used on its own by placing an Without facades = 12 ½ ” wide x 9” deep x optional facade on the side of the inn. The set 15” high also comes with an optional front entranceway that can be used to change the Printer Requirement: FDM Printer with an look of the front of the inn. 8”x8” (200mm x 200mm) bed 100% is set to 28mm (1/60) There are 8 door types in all and they are identifiable by circular or square marks on Preparation the bottom of the door. For details on how to clean and prop your Please refer to the guide at the end of this model please watch our YouTube video. document to determine which door fits into which doorway.
Printing Tips If you follow the proper designation
matching each door to its proper frame then If you are having bed adhesion issues we you should have no trouble imstalling doors. recommend printing with a brim of at least 4mm. Alternatively, we have had great For this model you will need to print the results using a product called Magigoo. following doors:
Every printer is different but in general here S1 x 8
are the main settings to pay attention to: S2 x 1 ● Turn support material OFF (all our S3 x 10 parts have built in support). S4 x 1 ● Layer Height of .2mm or less ● Retraction amount and speed LVL_DR ● Acceleration and jerk settings LV2_Dr ● Overall Print speed All doors use our Filalock system to secure the door to the hinge and allow it to rotate Notes freely. Simply clean the mini-supports from the door Scaling down: To print at 15mm scale reduce frame, slide your door into place, cut an all pieces by 50% * appropriate length of 1.75mm filament from * Please note that some functions such as your spool and insert it through the door doors will not work at this scale. Also some frame and the door hinges to secure the door details may not come out and will need to be in place. cleaned. Refer to our sample video to see this in Assembling: According to the accuracy of action. your printer some pieces might need to be trimmed with a hobby knife or filed down after printing. Battlegrip locking system: Many parts of this model use our Battlegrip A Note about doors: system to attach to one another. These Battlegrip pieces have been designed so that The models that make up the Last Hearth Inn you can fit the various parts of the model (Inn, Hotel and Guesthouse) all share the together prior to gluing. Learn more about same types of doors. BattleGrip here. Prints and Filenames # Print Designation Filename