Professional Documents
Culture Documents
Door recentering
wedge.
Monobloc floor standing enclosure made from a ■ Self-centreing of door through specially designed lock
continuous length of sheet steel triple folded. Front catches.
■ Locking system outside gasketed area.
with perforated profile. Back welded onto a flanged
■ Internal handle on left door for 2 doors up to 1400 mm
rear profile for higher protection. Painted internally and
high enclosures.
externally with polyester epoxy powder paint to light ■ 4 point locking on heights 1600 to 2000 mm.
grey RAL-7032 and texturized finish. ■ 2 point locking on heights 1000 to 1400 mm.
■ Foamed polyurethane gasket.
Easy installation:
■ Front frame with u 11×13 mm drillings and 25 mm pitch Configuration:
for fixing of accessories, modular distribution chassis, ■ CMO...PM version includes mounting plate.
19” racks, etc. ■ 4 mounting plate supports.
■ Perforated profiles with 25 mm pitch for depth adjusting ■ Plain front door with reinforcing frame.
of mounting plate and other accessories. ■ 5 mm double bar locking system.
■ Front door, 120º opening to right or left with reinforcing ■ 2 parts cable gland plate supplied with a gasket.
profile which can be used for mounting of equipment.
CMO 186/40 KT
Monobloc floor standing enclosure made from a Height Width Depth No. of
Reference
(A) (B) (C) doors
continuous length of sheet steel triple folded.
1200 800 300 1 CMO 128/30 KT
1400 600 300 1 CMO 146/30 KT
■ Front door, 120° opening to right or left with reinforcing 1400 600 400 1 CMO 146/40 KT
profile which can be used for mounting of equipment. 1400 800 300 1 CMO 148/30 KT
■ Rest of characteristics like those of the CMO standard 1400 800 400 1 CMO 148/40 KT
continuous length of sheet steel triple folded. ■ Plain front door with reinforcing profile and back door
without.
Front and back with perforated profile. Back welded
■ 5 mm double bar locking system.
onto a flanged rear profile for higher protection.
■ 4 mounting plate supports.
■ 2-part cable gland plate with gasket.
■ Front and rear door, 120º opening to right or left with
■ Internal handle on left door for 2 doors enclosure.
reinforcing profile which can be used for mounting of
equipment.
■ Rest of characteristics like those of the CMO standard
enclosure.
Dimensions (mm)
FIG. 1
Min. 105
Max. C - 45
A - 90
A - 90
25 25
B - 90 18 x 18 B - 90
Ø10
Ø5
12.5
A - 150
A - 150
A - 62
A-
A
A
B -150
24
B - 150 B - 150 B/2 - 150 C - 24
C + 6.5
C - 164*
C - 164*
C - 130
C - 130
C - 130
600/800 1200/1600 1000
1200 width models without central adjustement rails.
45
14
D - 68
Reference enclosures D
D
Width - 90
1600/1800
1000/1200
Dimensions (mm)
FIG. 2
CMO...KT enclosures
A - 90
25
B - 205 B - 90
B - 120
B - 164*
B - 280
A - 262
A - 150
A - 66
A-
C - 164*
C - 130
B
24
B - 150 C + 6.5
* Ground or plinth fixing dimensions.
FIG. 3
CMO...PUP enclosures
B - 164*
B/2 - 280
C - 164*
C - 130
1200
ENCLOSURE ASSEMBLY
CMO 20 888/50
Detail of inside of enclosure assembly with mounting plates fitted. Standard flat lock outside the gasketed area.
Various lock transformations are available.
Dimensions (mm)
Enclosure dimensions
Height H Reference 107
(A)
H - 96
H
Mounting plates
Enclosures dimensions
Height (A) Width (B) Reference
A-102
A-150
1000 1000 PMOL 1010
1200 800 PMOL 128
1200 1000 PMOL 1210
1200 1200 PMOL 1212
1400 600 PMOL 146
1400 800 PMOL 148
ø9
1400 1000 PMOL 1410
50
1400 1200 PMOL 1412
25
1600 600 PMOL 166 B-150
B-103
1600 800 PMOL 168
1600 1000 PMOL 1610
1600 1200 PMOL 1612
1800 600 PMOL 186
1800 800 PMOL 188 Ø9
1800 1000 PMOL 1810
1800 1200 PMOL 1812
50
1800 1600 PMOL 1816 Ø22
2000 600 PMOL 206
23
Single plinths
B - 164
B-2
100
200
Canopies
13.5
32.5
13.5
24.5
29
31
9
29
31
24.5
32.5
60
60
Fixing hole Fixing hole
Enclosures assembly