Professional Documents
Culture Documents
System Data Sheet inductar ONH cube_EN
System Data Sheet inductar ONH cube_EN
Sample Introduction
Construction Integrated, auto-aligned sample feeder on top of the analyzer
System Data Sheet
Furnace
Fusion furnace Programmable, high-performance solid-state induction furnace
Oxidation furnace Vertical, tilting, temperature controlled resistance heater
High temperature reactor Quartz glass tube, internal water cooling
Carrier gas Helium or argon or nitrogen (for H analysis via TCD) 1)
Carrier gas flow 0.5 - 0.75 l/min (depending on measurement mode) 1)
Carrier gas pre-pressure 3.0 bar
Connections Bayonet connector and quick swap clamp connections
1)
depending on chosen instrument configuration
inductar® ONH cube
Detectors / Electronics
Types Wide-range NDIR detector (IR), thermal conductivity detector (TCD),
electronic hydrogen sensor (EHS)
Calibration Single-point or multi-point calibration, calibrations and templates storable
Electronics Fully digital, fully integrated in unit
Security norms CE-mark, EN 61010-1
Software
Operating systems Windows® 10, Windows® 8, Windows® 7, other systems upon request
Features Automatic leak finding software
Intelligent error indicator
Auto sleep and wake-up
Statistical calculations
Automatic monitoring and indication of service cycle
LIMS integration
21 CFR part 11 compliant 2)
Data storage Non manipulated storage of experimental raw data and peak graphics
Balance Automatic data transfer from balance to computer 2)
2)
optional
Technical Specifications
depending on sample type, sample matrix, sample homogeneity and sample mass