The hydraulic motor has been placed tightly onto the
4.3 SYSTEM DESCRIPTION mechanism therefore there is no need for an extra drive machinery base. Between the electric motor Feeder consists of the following main components. and the mechanism there is a cardan shaft which is connected by flexible couplings. feeder structure with its wearing plates and grizzly bars if required. The speed of rotation i.o.w. stroke intensity can be vibrating mechanism adjusted by a frequency converter or a hydraulic unit. drive unit and supporting structures. The direction of the stroke can be adjusted by changing the position of the tooth-wheels. The side 1 Feeder structure for the drive of the feeder can be freely chosen.
The feeder structure is welded steel/profile steel 4 Grizzly bars
construction with wearing plates fastened by bolting, vibrating mechanism, spring support and grizzly bars The grizzly bars are made of wear resistant steel. when required. They are fastened by bolting to the feeder structure and the space between them is adjustable. 2 Vibrating mechanism 6 Springs The vibrating mechanism has been fastened by bolting it to the under edge of the side plates. The spring supports are bolted to the feeder body, Eccentric shafts rotate in the opposite direction thus allowing the feeder assembly to have any inclination causing a directional stroke. Eccentric masses have angle. been placed to the heads of the mechanism and onto the shafts and their magnitude can be varied by The coil springs are made of steel. adding or reducing counterweights thus allowing the stroke length to be adjusted accordingly.
Special bearings are used in the feeders to
guarantee a long lifetime. The shafts are oil lubricated.
3 Drive machinery
An electric or a hydraulic motor can be used in the
feeder. The opposite rotation movement of the drive shafts is caused by tooth-wheels in the shaft.