Professional Documents
Culture Documents
Eagle 160 BidSpec ENG 72dpi
Eagle 160 BidSpec ENG 72dpi
General Requirements
The thermal imaging camera shall be a hand-held device containing an infrared sensor
and capable of being employed in a walking or crawling posture for firefighting
applications.
Successful bidder shall provide, at the bidderÕs own expense, a factory-trained instructor
for such time as the department head shall require for complete instruction in the
operation and maintenance of the thermal imaging camera. Any exceptions to these
specifications must be detailed in a separate attachment, and failure to do so will
automatically disqualify the bidder. Successful bidder must be a factory-authorized
distributor to sell the equipment specified herein.
The housing shall also include a mounting fixture for a viewing screen and a silicon-rubber glare shield. The exterior of the camera shall
be equipped with reflective hand straps, as well as attachment points for use of a shoulder or neck strap.
The complete camera, with battery installed, shall weigh 4.2 pounds (4.5 pounds with transmitter installed). The overall dimensions of
the camera shall be 5 inches wide; 13.5 inches long; and 9.25 inches high.
LCD
The camera shall include a four-inch diagonal liquid crystal display. The display shall have an exterior protective cover that is mat-finished
to resist glare and shielded for protection against EMI.
Lens and Lens Protection
The core camera shall be equipped with a germanium lens recessed into the camera head housing to minimize damage from heat or
being dropped. The core camera lens shall provide a minimum field of view of 54¡ horizontal and 44¡ vertical. The camera housing shall
also include an exterior germanium lens to provide additional protection to the core camera and interior components of the camera.
The camera shall include on-screen icons to display the temperature indicator (optional); transmitter channel selection (optional); and
the gas-gauge type battery power indicator. Additional icons shall include a ÒLow BatÓ alert, which shall alert the user to a low battery
condition when only 20% of battery life remains, and a high heat warning automatically activated when the internal temperature of the
camera reaches 174¡ F. (79¡ C.).
Camera Handle
The camera shall include a handle permanently attached to the cameraÕs head housing and capable of being set by the user in any one
of three positions: fully-extended, partially extended; and fully retracted. The handle shall be set in place by means of a ball and detent
mechanism that is locked into place with a user operated hand wheel. It shall be possible to manipulate the hand wheel with a gloved
hand.
Optional Features
The thermal imaging camera shall be available with either of the following optional features:
¥ An on-screen, scale-formatted temperature readout of the image being viewed. The temperature scale shall be displayed in
increments of 100¡.
¥ A 2-channel wireless transmitter to enable transmission of the thermal image to a remote receiving station.
Additional requirements
The camera shall be produced by an ISO 9001-certified manufacturing facility. The camera shall be capable of successfully passing the
following testing requirements: MIL-STD-810 F (High/low temperature operating range; temperature shock; sand and dust resistance and
water immersion); ASTM Designation B117-97 (salt fog); IP-67
(one meter drop onto a concrete surface).
Each of the following camera components shall be capable of field level replacement: battery; front and rear bumper guards; hand straps;
protective germanium lens cover. All other parts replacement or service requirements shall be capable of being provided at a factory-
authorized service center.
UK: Finland:
Scott Health & Safety Ltd Scott Health & Safety Oy
Pimbo Road, West Pimbo, P.O.BOX 501
Skelmersdale, Lancashire, WN8 9RA FI-65101 Vaasa
ENGLAND FINLAND
Customer Services: Customer Services:
Tel: +44 (0)1695 711711 Tel.: +358 (0) 6 3244 543, -544
Fax: +44 (0)1695 711772 Fax: +358 (0) 6 3244 591
Email: scottint.uk@tycoint.com Email: fin.sales@tycoint.com
www.scottint.com www.scottsafety.com