Professional Documents
Culture Documents
Propak BRO ENG A3 72dpi
Propak BRO ENG A3 72dpi
P R O PA K Information System).
Trusted and proven high performance Easy adjust parachute style buckles
pneumatics • Quick pull forward action allows easy in-transit
• Supplies exceptionally high airflow, simple to adjustment
maintain and fully user serviceable • Large buckles allow for easy operation with
gloved hands and fast donning and doffing
T O TA L C A R E – T O TA L C O N F I D E N C E
DIMENSIONS
First stage pressure reducing valve featuring non-adjustable, spring
loaded piston mechanism and outlet supply protected by pressure relief
valve. Valve body and cap machined from nickel plated brass with
P R O PA K
stainless steel spring and hose retainer U-clips.
Length 600mm OUTLET PRESSURE P R O F E S S I O N A L F I R E F I G H T I N G B R E AT H I N G A P PA R AT U S
Width 278mm
Depth (with 6.0 litre 200 bar Cylinder) 200mm 200 bar inlet 5.5 to 9.5 bar
300 bar inlet 6.0 to 11.0 bar
PACKING SPECIFICATIONS Pressure relief valve protected approx 13.5 bar
Single 69x41x28cm 5kg Flow restrictor to gauge supply hose <25 litres minute
Duo 69x41x28cm 6kg PRESSURE INDICATOR & WARNING WHISTLE
APPROVALS Bourdon tube type dial indicator
PrEN137:2002 Class II Fire Fighting sets Heat and Impact resistant polycarbonate lens
EN139 where appropriate Safety blow-out vent in rear of gauge
Accuracy: +/- 10 bar between 40-300 bar
MAJOR COMPONENTS HOSES
TEMPEST DEMAND VALVE Stainless steel swivel hose fittings
Compact positive pressure demand valve featuring servo-assisted, tilting Medium pressure hose
diaphragm mechanism with low inspiratory resistance and responsive Maximum working pressure 16 bar
dynamic performance, automatic first breath actuation and hands free Minimum burst pressure 80 bar
bypass facility. Components injection moulded from polyamide and High pressure hose
acetyl with rubber seals and diaphragms. Maximum working pressure 450 bar
First breath activation –20 to –30 mbar Minimum burst pressure 800 bar
Peak flow performance in excess of 500 litres/minute
Bypass flow 150 litres/minute nominal
Static positive pressure 1.0 to 4.0 mbar
C O M M U N I C AT I O N S
Designed for use with Propak and all other Scott SCBA, the Sabre-Com is
a unique radio communications interface that fully integrates with your
existing radio and preferred choice of Scott facemask. Sabre-Com is
intrinsically safe and approved to EN136 Class 3.
VISION 3 PROMASK PP
Tel: +44 (0)1695 711711 Tel: +358 (0)6 3244 543 and -544
Fax: +44 (0)1695 711772 Fax: +358 (0)6 3244 591 In accordance with our
policy of continual product
scottint.uk@tycoint.com fin-sales@tycoint.com improvement, equipment
supplied may differ from the
www.scottint.com www.scottsafety.com specification detailed herein.
ISO 9001:2000
Certificate No.
FM 00932 0086