Professional Documents
Culture Documents
45 VQT
45 VQT
416444 FlexĆplate
(Install bronze face
towards rotor)
298147 Bolt (4 Req'd) 922701 Vane kit
Torque 55.2 - 67.8 N.m.
(40 - 50 lb. ft. )
430807 Wear plate S/A
194878 Washer
Shaft (See Table)
131812 Bearing
102949 Retaining Ring
158630 Retaining Ring
588509 Ring
154087 O" Ring
NOTE:
For satisfactory service life of these
components in industrial applications,
use full flow filtration to provide fluid
which meets ISO cleanliness code
16/13 or cleaner. OFP, OFR, and OFRS
series filters are recommended.
Model Code
1 2 3 4 5 6 7 8 9 10 11 12 13 14
NOTE NOTE
To reverse cartridge kit rotation, remove the When ordering spare cartridge parts, it is
two screws and reverse the location of the recommended they be obtained in carĆ
inlet support plate and outlet support plate. tridge kits. Kits are assembled and tested
Re-install the two screws hand tight. Use by Vickers for either right or left hand rotaĆ
pump cover to align all sections of the carĆ tion. If left hand rotation is required, it
tridge. Carefully remove the cover and should be specified on parts order by addĆ
tighten the screws. ing suffix L" to cartridge kit number.
Sharp Edges of Vane Must
Lead in Direction of Rotation
LH RH LH RH
RH LH RH LH