Professional Documents
Culture Documents
ICA Chapter-9 - 14 Complete
ICA Chapter-9 - 14 Complete
7. The iron and steel industry in India is guided by following principal environmental act
and rules_______.
a. The water (prevention and control of pollution) Act, 1974.
The water (prevention and control of pollution) Rules, 1975
b. The Air (prevention and control of pollution Act, 1981
The Air (prevention and control of pollution Rules, 1982
c. The environment (protection) Act 1986
The environment (protection) Rules 1986
Noise pollution (Regulation and control) rules, 2000
Environmental Impact Assessment (EIA) Notification, 2006
Hazardous and other wastes (management and trans boundary movement) Rules
2016
Bio-medical waste management rules, 2016
Solid waste management Rules, 2016
plastic waste management rules, 2016
Construction and demolition waste management Rules 2016
E-waste management rules,2022
Batter waste management rules, 2022 d. All
8. What are the air pollution control equipment/ facilities?
a. Bag filters. c. multi cyclones e. de-dusting system
b. Electrostatic precipitators. d. ventury scrubber f. covered conveying system
g. all
9. Through which is emission of SO2 controlled?
ANSWER
1 2 3 4 5 6 7 8 9 10 11 12 13
A B E E B E D G C A C
14 15 16 17 18 19 20 21 22 23 24 25 26
C D A B A B C B C C A B
27 28 29 30 31 32 33 34 35 36 37 38 39
C B A C B A C C B C B
ANSWER :
1 2 3 4 5 6 7 8 9 10 11 12 13
B A A B B B A A C C D B A
Answer :
1 2 3 4 5 6 7 8 9 10 11 12
A B A B E B B C B B B
• adherence to laid down standards and safe working procedures in each department/
shop is DSO & Safety steward
• DSO play an important role by monitoring safety aspects as forefront on daily basis?
zonal safety officers is deployed to monitor safety during various phases of project/
construction work?
• A new safety interaction module was conceived for better communication and
implementation for achieving zero fatality --- SAMPARK.
• SPARSH was new initiative introduced by SSO in the beginning of all training
programmes at MTI, Ranchi with a view to sensitize and orient employees to achieve
the target of “zero fatality” in SAIL?
• DSP was safety operating committee (SOC) was formed for 1st time and first meeting
on the theme” safety during steel making” organized during 12th-13th Oct.23. The
meeting was attended by 73 participants from 19 organizations?
• The executives E-7&below have been assigned one or more of the desk covering all
plants and units of SAIL.
• At SSO, personnel are broadly categorized as non-executive and executives?
Grade Nos
E-9 01
E-8 01
E-7 04
E-6 02
E-5 05
E-3 02
S-11 02
S-9 01
7. The entire safety management system of SAIL hinges around 3 E’s of accident
prevention.
a. Engineering b. Education c. Enforcement d. all
8. Three tiers safety audits are being conducted at plant/ units-
a. Internally by concerned area safety officer of safety engineering deptt. and DSO
b. Safety audit by SAIL safety organization.
c. External safety audit by third parties as per statutory requirements.
d. All
9. To facilitate in development of safety culture across the plants/ units, a safety
consultant of global repute has been deployed at 5 ISPs i.e. _________.
a. Bhilai b. Bokaro c. Raurkela d. IISCO
e. DSP f. asp g. all
10. Who played a key role in preparation of NIT mainly w.r.t. defining the eligibility?
Capability criteria as well as evaluation of suitable bidders?
a. DSP b.SSO c. CCSO d. WSA
11. An e-book of fatal accident case studies is published every year by ______ and
circulated to plants/ units leaving & Implementation.
a. DSO b. CCSO c. SSO d. WSO
12. In accordance with MOS target of covering ______ % employees in training
programmes every year
a. 50% b. 100% c. 90% d. 80%
13. Full form of JCSSI :- joint committee on safety, health and environment in steel
industry.
14. _____ is a unique bipartite forum at national level with representation from major
central trade union and management of major steel producers of the country.
a. SSP b. DSO c. CCSO d. JCSSI
15. Sharing of information among members is also facilitated through ______ website-
wwwjesii.com.
a. SSO b. DSO c. JCSSI d. CCSO
16. Where are National safety day, world steel safety day celebrated by organizing
various competitions for employees of SAIL units and their words school children etc
to generate awareness?
a. Delhi b. Ranchi c. Kolkata d. Dhanbad
17. When was an e-book covering good safety systems and practices of steel industry and
important points of safety consultants compiled by SSO released by director (T.P &
RM), SAIL at MTI, Ranchi?
a. 4 Oct. 2023 b. 22 March 2023 c. 12 Oct 2023
18. When was the book “SAMIKSHA” released by Director (T,P&RM), SAIL at MTI,
Ranchi?
a. 4 Oct-2022 b. 22 March 2023 c. 12Oct. 2023
19. A new initiative titled “_______” was launched to align the thinking and working of
SSO with plants/ units.
a. SUKRITI b. SAMIKSHA c.SURAKSHA MANTHAN
d. SAMPARK
20. A new safety interaction module was conceived for better communication and
implementation for achieving zero fatality
22. Where was safety operating committee (SOC) was formed for 1st time and first
meeting on the theme” safety during steel making” organized during 12th-13th Oct.23.
The meeting was attended by 73 participants from 19 organizations?
a. BSP b. DSP c. RSP d. SSP
23. SSO has _________non-executives and _____ executives as on 1st Jan2024.
a. 3,15 b. 15, 3 c. 4.14 d. 5,13
24. The executives _____ have been assigned one or more of the desk covering all plants
and units of SAIL.
a. E-7&below b. E-5&below c. E-3& below d. E-6 &below
ANSWER :
1 2 3 4 5 6 7 8 9 10 11 12
D D D C A C D D G B C
13 14 15 16 17 18 19 20 21 22 23 24
D C B A B C C A B A A
1. What may be defined as the degree to which a set of inherent characteristics fulfils
requirements ? a. quality b. quantity c. Productivity
2. Max. speed of an aircraft is which type inherent characteristics ?
a. Temporal b. Functional c. Behavioral d. Ergonomic
3. Related to smell, touch, taste, sight, hearing are which type inherent characteristics?
a. Physical b. Sensory c. Temporal d. Ergonomic
4. Physiological characteristic or related to human safety is which type characteristic
? a. Physical b. Sensory c. Tempora d. Ergonomic
5. Punctuality, reliability, availability are which type of characteristics ?
a. Sensory b. Temporal c. Behavioral d. None
6. Courtesy ,honesty, veracity are which type of characteristics ?
a. Temporal b. Behavioral c. Sensory d. None
7. Mechanical, electrical, chemical or biological characteristics are which type of
characteristics ? a. Phsical b. Temporal c. Functional d. None
8. The concept of Total Quality represents the way a company runs its business and
it needs a structure approach embracing. A. Quality improvement b. Quality control
c. Both d. None
9. Just-in-time concept & other business improvement activities to mobilise for
organised creation of beneficial change in the business with outcomes as : a.
Continuous cost reduction b. Elimination of variability c. Reduction in plant
downtime d. Increase in yield e. Just-in-time concept f. Improved human relations
g. All 10. The total quality aims at _____ a. the prevention of defects b. starts at the
beginning of process c. Detection of defects at the end of product line d. All
11. Total quality management includes four major elements ___
a. System b. Pocesses c. Management d. People e. All
12. How many Quality Management Tools ? a. 6 b. 5 c. 7 d. 10
13. Seven Quality Management Tools are ___ a. a. Pareto Analysis/Diagram b.
Cause & Defect Diagram c. Stratification d. Check Sheet e. Histogram f.
Scatter Diagram g. Graph & Control Chart h. ALL
14.Supervisor’sRoleinTQP---
1. Study the existing cultural pattern 2. Identify those aspects, which need change
3. Secure active participation of others involved – including customer participation as
well as his active assistance
4. Start on a small scale and use results to broaden application
5. Make Quality improvement project by project and in no other way
6. Make use of available tools
7. Make studies with application of simple to sophisticated tools of SQC
ANSWER
1 2 3 4 5 6 7 8 9 10 11 12 13
C D G B C B A C D B A C
14 15 16 17 18 19 20 21 22 23 24 25 26
C C D K G D D
27 28 29 30 31 32 33 34 35 36 37 38 39
B A B B C B B C M