Professional Documents
Culture Documents
first machine was introduced in 1996, this being the first of its kind on the market. Its amphibious properties make it the ideal choice for working in and around water. Driven with care and with its minimal ground pressure, damage to river banks and sensitive areas can be minimised making the Truxor ideal for working on golf courses, nature reserves and public parks where larger, heavier machines have difficulty operating. The Truxor is easy to drive and can turn on its own axis in water. The joy stick steering is precise and is ideal for operating in confined spaces such as marinas. The wide range of attachments makes it an ideal tool for a variety of tasks. The quick connection system allows for the easy exchange of most tools. The Truxor can be converted from a reed cutter to a collector in the blink of an eye. Our machines are normally delivered filled with standard hydraulic oil ISO WG 46 or they can be supplied with environmentally friendly biodegradable oil. We are pleased to present two similar looking models whos operating capabilities differ with the size of engine, hydraulic system and optional tools. TRUXOR DM 4700 B is the original which has been continuously up dated and improved since its launch in 1996. We recommend this machine primarily for reed harvesting and the cutting and collecting of aquatic plants TRUXOR DM 5000 is our latest model with a different hydraulic system and a larger engine as the power source for the tool attachments. In addition to its cutting and collecting capabilities this new machine is designed to offer more possibilities for dredging and oil decontamination.
Truxor
More optional tools Standard equipped with work lighting Many hydraulic outlets for operation of tools. Electrically-heated
driver's seat. Adjustable flow for all functions of the hydraulic system
Cutting unit
Doro Cutter 3090/3091
The Doro Cutter 3090 is recommended for cutting of normal aquatic vegetation and is usually the obvious choice in most waters. The cutter is operated hydraulically and is easily connected to Truxors equipment bracket. Cutting depth is 1 m. The knives are exchangeable and the working breadth may be varied from 2.2 to 4 m. The cutter requires water for lubrication during work and is therefore not suitable for use on land. A stone-triggered system protects it from breaking the knives against solid objects. The Doro Cutter 3091 is the same model of cutter, but has an extended cutting depth of 1.4 Both models are delivered as standard with a knife work width of 4 metres.
Accessories:
Kn ife kits
2 (off) Work width 2.2 m Art no. 95-70022 2 (off) Work width 3 m Art no. 95-70030 2 (off) Work width 4 m Art no. 95-70040
Cutting unit
Doro Cutter ESM 2200
Doro Cutter ESM 2200 cuts and gathers at the same time making it the ideal tool for working in marinas and small streams where water is constantly moving. If only the cutting function is required the collection basket can be easily removed. Doro Cutter ESM 2200 has a work width of 2.1 m and a cutting depth of approximately 0.8 m in water. The knives are a Busati double-action model which means that the cutter does not require water for lubrication while working.
Rakes
Reed rake, standard
with collapsible side sections; for gathering and transporting plants after reed cutting. The rake can be complemented with strainer plates for gathering of refuse, algae and absorbers (oil decontamination). Work width: Weight: Art no. 2 or 3.5 m. 60 kg 94-22500
Collection - just as important as cutting Cut water plants left in the water act as a fertiliser. We therefore recommend that cut plants always be collected and removed. By gathering water plants and picking them up, you also help to remove part of the "over-fertilisation" from the lake. For those using their reed cutter in different type of water, we usually recommend cleaning the machine between moves in order to prevent spreading undesired water plants to new water systems.
2 or 3.5 m. 60 kg 94-22500
Springing rake
When the waterside is uneven, the material can be removed from the water using the springing rake and then collected using the standard rake. Work width Weight Art no. 2.5 m 30 kg 94-47600
The grip bucket is used for the removal of silt and submerged objects from canal bottoms or lakes. Using the telescopic arm gives a working depth of 1.7 m. For surface work the standard bracket is used for the bucket or log grab giving a greater lifting power without the telescopic arm.
Dredge pumps
The Doro Pump The Doro Pump is the new addition to our
range of pumps designed specifically for the new TRUXOR DM 5000 running directly from the hydraulic engine. It has a capacity of 10 - 40 m/h. The pump is mounted on a telescopic arm (sold separately). A rotating wheel with horizontal cutters and vertical teeth aerates the sediment and cuts off roots and soft materials to facilitate feeding of material into the pump. The rotating wheel makes the pump easier to maneuveur than its predecessor which had a feeding screw at the pump inlet. The feeding is important to providing an even flow of sediment to the pump; also facilitated by the knives positioned at the inlet of the pump.
Accessories:
Flat tubing 100 mm (Delivered in lengths of 50 m) Art no. 78-102 Splice sleeve 100 mm Art no. 78-18800 Tube clips 100 mm Art no. 01-110D20
Dredge pumps
Technical data: D redge Pump 2500
Engine: Briggs & Stratton 23 hp, electric start, air-cooled. Centrifugal coupling which protects the pump from overloading. Capacity: 10-40 m/hour depending on material, lifting height and the length of the tubing. Dredging depth: 1600 mm Length: 1950 mm Weight: 166 kg Dredge pump 2500 is delivered CE-marked Dredge pump 2500 is delivered with a standard kit Art no. 78-2500
Accessories:
Flat tubing 100 mm (Delivered lengths of 50 m) Joint sleeve 100 mm Tube clamps 110 mm
Excavator
Truxor models. The unit becomes a floating excavator offering unique possibilities. Ideal for clearing inlets and around sluice gates, digging channels and even cable laying. The excavator is operated from the drivers position with the two lever operating consul connected to a central adjustable bracket. The amphibious nature of the Truxor allows excavation work to be carried out in areas inaccessible to conventional equipment
Accessories:
49-litre bucket, work width 0.6 m Art no. 77-11900 Root knife: work depth 0.6 m Art no. 77-13400
Cultivator
The Doro Miller is used as a restoration miller for wetlands, beaches and lake bottoms.
The miller is available in different work widths; they are exchangeable and can be dismounted from the operating unit. The operating unit is mounted on the lifting arm. When water lily roots and other roots are to be removed, a rotary knife is attached using an extension on the lifting arm which gives a work depth of 1.6 m.
Oil decontamination
The new TRUXOR 5000 has been designed to accommodate a new range of products for oil spill clean up. The Doroskimmer 400 can be used with two types of pump for use with heavy or light oil SALA ROLL PUMP can pump heavy sediment or oil without using large volumes of water. This pump can be used independently for dredging or vacuuming oil residue where the skimmer cannot operate. FOILEX is a high capacity pump for use on larger oil spills
Doroskimmer 400
A combi-skimmer used for oil decontamination of heavy or thin oils and algae. The Skimmer is delivered with a brush roller of mixed brush thicknesses which is suitable for decontamination of most type of oils. Combine with Sala or Foilex pumps. Capacity Weight Equipment holder 0.20 m3/h 48 kg Only Truxor DM 5000
Foilex pump
A patented low-speed TDS Pump with "Twin Disc Screw" pump technology with a higher capacity than the conventional screw pump. The inlet has cutting knives and can pump both thick and thin substances. A Foliex pump is mounted on a Doroskimmer 400 and can also be adapted for use separately. Delivered with a 3 m pressure tube 100 mm. Capacity: Weight Equipment carrier: Art no. 18 m3/h at 6 bar 35 kg only for Truxor DM 5000 79-4000
Oil decontamination
Oil decontamination has different prerequisites for dif-ferent environments. During the final phase of work, there are usually smaller areas with pools of oil where it can be more practical to use a mobile tank. The Doro Tank is mounted between the pontoons and has couplings for simple connection to pumps as well as a connection for emptying the tank. The Doro Tank is used in combination with a Doroskimmer 400.
The Trailer LMT 2500 is specifically designed to transport the Truxor. The trailer tip action and ramps allow for easy loading and off loading of the machines. Guide rails are fixed to the bed of the trailer to ensure the Truxor is located centrally and to avoid movement during transportation. The specially designed chassis of highly durable steel and I beams provide a strong, lightweight trailer. Maintenance is minimal due to the design and quality of the materials.
Accessories:
Kit with ramps and clamps Art no. 75-17100
Our lakes and waterways are overgrown due to overfertilization and much discussed climate changes. The lakes are acidified preventing the flow of water. By cutting and clearing inlets and outlets, the lakes can continue to prosper and in many places cutting is performed to improve the flow of water and prevent flooding. Regular reed cutting allows for increased use of lakes and waterways in the form of available, navigable waterways, access to fishing, more beautiful views and well-kept bathing sites.
Dorotea Mekaniska AB
We are a company specialising in the manufacture of machines designed for aquatic weed harvesting, reed cutting and the management of waterways and wetland habitats. We have been developing and producing innovative machines and accessories for 16 years and are today Swedens and possible the worlds largest supplier of amphibious weed harvesters/ tool carriers. We supply a range of products from small dinghy mounted cutters to purpose made excavators, dredgers, weed and reed harvesters. Good quality and reliability are our motto and through time and experience, talking and listening to our customers around the world we now produce a comprehensive range of equipment and accessories for water management. As well as manufacturing in Dorotea we also have a comprehensive spare parts facility and sales office. We have retailers and suppliers around the world and spare parts are also available from our partners Rajo in Belgium. www.rajo.be
At our web site you will always find the latest news! Image galleries, films, brochures, etc.
RETAILER: MANUFACTURING/SALES: Dor otea Mekaniska AB str a Polar vgen 10 917 32 Dor otea