0% found this document useful (0 votes)
52 views4 pages

Chassis LS MAVT Fifth Sequence.

The document is an evaluation paper for the Motor Mechanics Department at Amasia Bilingual Technical School, focusing on chassis systems and transmission for the academic year 2024/2025. It consists of multiple-choice questions related to air conditioning systems, including devices, functions, and operational parameters. The evaluation is designed for the LS-MAVT class and has a time limit of 1.5 minutes.

Uploaded by

Weyih Regan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
52 views4 pages

Chassis LS MAVT Fifth Sequence.

The document is an evaluation paper for the Motor Mechanics Department at Amasia Bilingual Technical School, focusing on chassis systems and transmission for the academic year 2024/2025. It consists of multiple-choice questions related to air conditioning systems, including devices, functions, and operational parameters. The evaluation is designed for the LS-MAVT class and has a time limit of 1.5 minutes.

Uploaded by

Weyih Regan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

REPUBLIC OF CAMEROON Amasia Bilingual Technical School

************** **************
Peace – Work – Fatherland MOTOR MECHANICS DEPARTMENT
************** **************
MINISTRY OF SECONDARY ACADEMIC YEAR 2024/2025
EDUCATION

FIFTH SEQUENCE EVALUATION


SUBJECT CHASSIS SYSTEMS AND TRANSMISSION
CLASS LS-MAVT
TIME 1.5mins
COEFFICIENT 3

INSTRUCTIONS : Answer all of the MCQs.

SECTION A : AIR CONDITIONING SYSTEM


1. What is the device used B Condenser
in air conditioning C Receiver
system? D Expansion valve
3. What is the name of air
conditioning?

A Compressor
B Condenser
C Receiver
D Evaporator
2. What is the name of A Compressor
device in air conditioning B Receiver
system? C Condenser
D Blower
4. What is the name of
device

A Magnetic clutch

Page 1 of 4
doing performance checking
in automobile AC system?
A 4 kg per min
B 6 kg per
C 10kk per min
D 8 kg per min
9 What is the name of device
A Evaporator used in the automobile AC
B Condenser system?
C Blower
D Expansion valve
5. What is the name of
device?

A Thermostatic switch
B Expansion valve
C Ambient temperature sensor
D Evaporator
A Condenser 10 Which is not the part of
B Evaporator servo motor assembly?
C Receiver A Gear reduction unit
D Expansion valve B Normal DC motor
6. What is the name of C Position sensor
device? D Expansion valve
11 How much DC supply
voltage required for servo
motor?
A 4 V to 8 V
B 4.8 V to 6 V
A Ambient temperature sensor C 3.5 V to 8 V
B Thermostatic switch D 5 V to 7.5 V
C Expansion valve 12 Which wire of servo motor
D Servo motor connected to power supply?
7. What is the boiling point A White
of refrigerant R- 134a? B Yellow
A 20.5°C C Black
B 22.0°C D Red
C 26.5°C 13 What is the type of heat
D 27.8°C control system?
8 What should be the high
air flow rate permitted while

Page 2 of 4
C Receiver
D Blower
18. Which type of flow mode
is selected if outside is dusty
and contaminated in car AC
A Ventilation system system?
B Air blending heating system A Recirculation mode
C Water valve heating system B Fresh mode
D Automatic climate control C Heating mode
system D Defroster mode
14. What is the function of 19. Which device acts as an
magnetic clutch in air evaporator temperature
conditioning system? sensing switch?
A Cool the hot refrigerant A Thermostatic switch
B Connect and disconnect B Blower switch
drive to compressor C Heater switch
C Absorbs moisture in the D Defroster switch
system 20. Where the ambient
D Control the refrigerant flow temperature sensor is
to evaporator located in the vehicle?
15. What is the function of A Behind the grill
condenser? B Rear side of engine
A Control the refrigerant flow C Front axle
B Absorbs moisture in the D Top of servo motor
system 21. What is the function
C Cool the hot refrigerant ambient temperature sensor
D Convert refrigerant to in the air conditioning
vapour system?
A Monitor air temperature
16. Which part of air inside vehicle
conditioning system absorbs B Monitor air temperature
moisture in the system? outside vehicle
A Expansion valve C Monitor air temperature in
B Receiver driver cabin
C Condenser D Monitor air temperature at
D Evaporator the exhaust
17. Which part of air 22. What is the advantage of
conditioning system using servo motor in air
removes heat from air and conditioning system?
transfer to the refrigerant? A High speed operation
A Evaporator possible
B Condenser

Page 3 of 4
B Suitable for precision
control of rotation
C Low cost of maintenance
D Suitable to prevent
vibration
23. Which sensor measures
the actual body temperature
of passengers?
A Smog sensor
B Sun load sensor
C Infrared sensor
D Interior temperature sensor

24. Which sensor causes off


the outside air inlet or other
odours?
A Infrared sensor
B Smog sensor
C Unloader sensor
D Temperature sensor

Page 4 of 4

You might also like