Professional Documents
Culture Documents
Problem 6
Problem 6
Introduction
The problem will test your knowledge of sweeps and blends.
Problem Statement 1. Create the pipe shown in Figure P6-1 using a sweep. Create the trajectory with three straight lines. The outer diameter 2.
of the pipe should be 20 inches, and the inner diameter should be 15 inches. Create the part shown in Figure P6-2 using a blend. Hint: All of the cross-sections should be square.
[Figure P6-1]
Dr. S.A.Shah
Page 1
[Figure P6-2]
Dr. S.A.Shah
Page 2