Professional Documents
Culture Documents
EPE/XFE/HPE/HXPE 300-2S
EPE/XFE/HPE/HXPE 350-2S
EPE/XFE/HPE/HXPE 400-2S
EPE/XFE/HPE/HXPE 450-2S
EPE/XFE/HPE/HXPE 500-2S
PARTS LIST
RECOMMENDED SPARES
Limitation of Liability
The remedies of the Purchaser set forth herein are exclusive, and the total liability of the Company with respect to
this contract or the Equipment and services furnished hereunder, in connection with the performance or breach
thereof, or from the manufacture, sale, delivery, installation, repair or technical direction covered by or furnished
under this contract, whether passed on contract, warranty negligence, indemnity, strict liability or otherwise, shall not
exceed the purchase price of the unit of Equipment upon which such liability is based.
The Company and its suppliers shall in no event be liable to the Purchaser, any successors in interest or any ben-
eficiary or assignee of this contract for any consequential, incidental, indirect, special or punitive damages arising
out of this contract or any breach thereof, or any defect in, or failure of, or malfunction of the Equipment hereunder,
whether based upon loss of use, lost profits or revenue, interest, lost goodwill, work stoppage, impairment of other
goods, loss by reason of shutdown or non-operation, increased expenses of operation, cost of purchase of replace-
ment power or claims of Purchaser or customers of Purchaser for service interruption whether or not such loss or
damage is based on contract, warranty, negligence, indemnity, strict liability or otherwise.
50-500 HP
50-500 HP
©INGERSOLL-RAND COMPANY
TABLE OF CONTENTS
Safety and Warnings........................................................... 2 ROTARY SCREW AIR COMPRESSOR
Introduction......................................................................... 3
Intellisys Controller & Starter Box Assembly............... 4-5 This unit was purchased from
No Starter Assembly........................................................6-7
Starter (Star Delta) B180-B110........................................8-9 ___________________________________________
Starter (Star Delta) B250-B180....................................10-11
Starter (Star Delta) B300-B180....................................12-13 ___________________________________________
Starter (Star Delta) B300-B250....................................14-15
Major Components 250-300 HP.................................. 16-17 ___________________________________________
Major Components 350-500 HP.................................. 18-19
Drive Train Assembly 250-500 HP.............................. 20-21 Ingersoll-Rand Company reserves the right to make
Airend 250-450 HP-With Oil Pump............................. 22-23 changes or add improvements without notice and without
8”Inlet Valve With Air Filter - 250-500 HP ................. 24-25 incurring any obligation to make such changes or add such
8”Inlet Valve/Stepper Motor - 250-500 HP................. 26-27 improvements to products sold previously.
Separator Tank 250-300 HP......................................... 28-29
Model:_________________________________________
Separator Tank 350-500 HP......................................... 30-31
Aircooled Cooler 250-300 HP ..................................... 32-33 No.of units on order:_____________________________
Air Discharge Assembly 250-300 HP ........................ 34-35
No Aftercooler Customer Order No:______________________________
Aircooled Cooler 350-500 HP ..................................... 36-37
Air Discharge Assembly 350-500 HP......................... 38-39 Ingersoll-Rand Co.Order No:______________________
No Aftercooler
Watercooled Assembly 250-300 HP ...........................40-41 For ready reference:
Record the serial number and model number of your unit
Watercooled Assembly Options 250-300 HP ........... 42-45
here.
Watercooled Assembly 350-500 HP - 90°.................. 46-47
Watercooled Assembly Options 350-500 HP - 90° ... 48-49 Serial Number:___________________________________
Watercooled Assembly 350-500 HP - ........................ 50-51
Stainless Steel
Watercooled Assembly 350-500 HP - 115°.................52-53
Watercooled Assembly Options 350-500 HP - 115° . 54-55
Aircooled Intake 250-300 HP ...................................... 56-57
Aircooled Intake 350-500 HP ...................................... 58-59
Enclosure 250-300 HP................................................. 60-63
Enclosure 350-500 HP................................................. 64-67
Enclosure 250-300 HP Extended Package................ 68-71
Low Ambient Assembly 250-300 HP.......................... 72-73
Low Ambient Extended Package Enclosure -........... 74-77
250-300 HP
Outdoor Modification Enclosure 250-300 HP ........... 78-81
Low Ambient Assembly 350-500 HP.......................... 82-83
Extended Package 350-500 HP................................... 84-85
Outdoor Modification Enclosure 350-500 HP ........... 86-89
O-Rings.............................................................................. 90
Recommended Spare Parts List................................ 92-95
NOTE: HP is Horsepower
1
! WARNING
Failure to adhere to these recommendations can result in mechanical fa i l u r e, property damage and serious injury or death.
All air and water inlet, and air and water discharge pipewo rk to and from the inlet and discharge port connections must take
into account vibration, pulsations, tempera t u r e, maximum pressure applied, corrosion and chemical resistance.In addition, it
should be noted that lubricated compressors will discharge some oil into the air stream;t h e r e fo r e, compatibility betwe e n
discharge piping, system accessories and software must be assured.
For the foregoing reasons, the use of plastic piping, soldered copper fittings and ru bber hose as discharge piping is not rec-
o m m e n d e d .In addition, flex i ble joints and/or flex lines can only be considered for such purposes if their specifications fit the
o p e rating parameters of the system.
It is the responsibility of the installer and owner to provide the appropriate service pipewo rk to and from the machine.
! WARNING
“Ingersoll-Rand air compressors are not designed, intended, or approved for breathing air.Ingersoll-Rand does not approve
s p e c i a l i zed equipment for breathing air application and assumes no responsibility or liability for compressors used fo r
breathing air serv i c e s.”
2
PARTS LIST parts in the illustration. Each part
on an illustration is referenced with
By using the last (6) digits of the
serial number, as outlined below,
INTRODUCTION a number.The number, description this change is recorded in the parts
and quantity needed per assembly list.
GENERAL is listed in numerical order on the
following pages. > U92240 indicates part is used
This manual, which contains an on units up to and including serial
illustrated parts breakdown, has OPTIONAL EQUIPMENT number ending in U92240.
been prepared as an aid in identify-
ing and ordering parts in the SSR Several optional accessories/items U92241 > indicates part is used
compressor. All of the compressor are available for convenience or on units with serial number ending
parts listed in the parts breakdown special application.These acces- in U92241 or higher.
are manufactured with the same sories have been selected as being
precision as the original equipment. particularly suitable for use on the HOWTO ORDER PARTS
SSR compressor.
Ingersoll-Rand Company service In order that all avoidable errors be
facilities and parts are available For complete details on Optional eliminated when ordering parts,
worldwide.There are Ingersoll- Equipment, contact your Sales please specify the following:
Rand company Branch Offices and Representative.
authorized distributors located in 1.The model number of the unit as
the principle cities of the United HOW TO USE THIS PARTS shown on the Compressor Data
States. In Canada, our customers MANUAL Plate.
are serviced by the Canadian 1. Turn to the Parts Section to
Ingersoll-Rand Company, Limited. 2.The serial number of the unit as
locate the desired illustrations. shown on the Compressor Data
There are also Ingersoll-Rand
Company subsidiaries and autho- Plate.
2. Locate the part on the illustration
rized distributors located in the by visual identification and the ref-
principle cities throughout the 3.The form number of this manual
erence number. (shown on front cover).
world.
3. Find the referenced number on 4.The reference number, part num-
DESCRIPTION the Tabulated page, along with the ber, description and quantity need-
The illustrated parts breakdown Part Number and Description. ed exactly as listed.
illustrates the various assemblies,
sub-assemblies and detailed parts SERIAL NUMBER BREAK 5.The motor data code shown on
which make up this particular SSR When a part is changed and it the motor data plate.
compressor. A series of illustrations doesn’t supersede the previous
show each part clearly and in it’s part, this change must be docu-
correct location relative to the other mented by a serial number break.
* 0000 U 92 240
MANUFACTURED IN U.S.
YEAR OF MANUFACTURE
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
O-RINGS
Part Size/ Tube
No. Thread ID Width Size
90
NOTE:
91
SSR 250-300 HP SPARE PA RT S
QTY. LOCATION
PART PER OR
COMPRESSOR PART NO. UNIT USE
92
SSR 250-300 HP SPARE PARTS (Continued)
QTY. LOCATION
PART PER OR
COMPRESSOR PART NO. UNIT USE
B300-B180 Starter
Coil 39251376 2 In 300 Amp Contactor
Contact Kit 39251384 2 In 300 Amp Contactor
Coil 39251368 1 In 180 Amp Contactor
Contact Kit 39251400 1 In 180 Amp Contactor
93
SSR 350-500 HP SPARE PARTS
QTY. LOCATION
PART PER OR
COMPRESSOR PART NO. UNIT USE
94
SSR 350-500 HP SPARE PARTS (Continued)
QTY. LOCATION
PART PER OR
COMPRESSOR PART NO. UNIT USE
95