Professional Documents
Culture Documents
CHBE 446
February 13, 2015
Group: 8
Cesar Castro
Jacky Tsai
Dung Phan
Vivi He
Outline/Agenda
Types of Distillation Columns in ChemCAD
Steps for doing distillation in ChemCAD
1 set up workspace
2 choose component
3 thermodynamic setting
4 feed stream data
5 distillation column data
6 RUN and report streams
Plots
Types of Distillation Column in
ChemCAD
There are three rigorous steady state distillation models in
CHEMCAD:
scds (simultaneous correction distillation)
tower (Inside-out method)
tower+ (tower unit with additional in/out connections).
The shor column is not a rigorous column. The shor
column uses the Fenske-Underwood-Giliand model to
calculate separations.
There is also one Batch column
Which to choose?
scds column: activity coefficient K values
tower column: equations of state.
tower+ column: petroleum models.
shor column: generally used only in
education, and should not be used to
model an actual column.
Recommendations
Step one: set up in
Workspace
3
2
Step two cont.
Step two cont.
Step three: Thermodynamic setting
http://www.chemstations.com/c
ontent/documents/Technical_Ar
ticles/thermo.pdf
2 Choose two to
enter
Data shown
after Flash
1
Step five: distillation column
data
Step five cont.
Step six: RUN and report