Vent pipes allow foul gases to escape from drainage systems into the atmosphere. They must be made of approved materials like cast iron or PVC, with galvanized steel pipes requiring an above-ground portion. Drainage pipes in homes must be the correct size and angle to allow waste and water to flow together toward the soil stack and out of the building. Vent pipes placed strategically inside the drainage system allow air in to help drainage flow and vent sewer gases. Traps, cleanouts, backwater valves, and properly terminating vent pipes are also required parts of a drainage system.
Vent pipes allow foul gases to escape from drainage systems into the atmosphere. They must be made of approved materials like cast iron or PVC, with galvanized steel pipes requiring an above-ground portion. Drainage pipes in homes must be the correct size and angle to allow waste and water to flow together toward the soil stack and out of the building. Vent pipes placed strategically inside the drainage system allow air in to help drainage flow and vent sewer gases. Traps, cleanouts, backwater valves, and properly terminating vent pipes are also required parts of a drainage system.
Vent pipes allow foul gases to escape from drainage systems into the atmosphere. They must be made of approved materials like cast iron or PVC, with galvanized steel pipes requiring an above-ground portion. Drainage pipes in homes must be the correct size and angle to allow waste and water to flow together toward the soil stack and out of the building. Vent pipes placed strategically inside the drainage system allow air in to help drainage flow and vent sewer gases. Traps, cleanouts, backwater valves, and properly terminating vent pipes are also required parts of a drainage system.
ventilation is known as vent pipe through which foul gases escape into atmosphere. Ventpipe shall be of cast iron, galvanized steel, galvanized wrought iron, Schedule 401 ABS DWV, Schedule 40 PVC DWV, or other approved materials having a smooth and uniform bore except that: Galvanized iron or steel pipe shall not be installed underground and shall be 6 inch above ground. When we flush a toilet, empty a bath tub or sink, wash clothes, etc. we run water and waste through a system of pipes in our homes out to a waste system of some sort. Drainpipes in our homes/buildings have to be the correct size.
Ventpipe shall be of cast iron, galvanized
steel, galvanized wrought iron, Schedule 401 ABS DWV, Schedule 40 PVC DWV, or other approved materials having a smooth and uniform bore except that: Galvanized iron or steel pipe shall not be installed underground and shall be 6 inch above ground. From our sinks, toilets, etc. the waste runs into pipes. These pipes have to be at the correct angle in order for the waste and water to flow together. Thewater and waste then move to a larger pipe called the soil stack. Inside the pipe system of the building there needs to be vents strategically placed. These vents allow air into the system so that the pipes can run correctly and also to vent the gases that build up from the septic waste. A trap blocks sewer/septic gases. Without one, sewer gases can flow up the stack, drain pipes and come out wherever there's a drain. A trap looks like a "U" and is installed below the drain. In the pipeline there needs to be installed special areas: Cleanouts are put at different spots to allow access to the pipes if there is a blockage. These are Tees or Wyes placed in the system. Backwater valves are placed in the system as well. These valves do not let waste and water back into the system once it leaves the house/building. This has a one way flap the allows things to flow only one way. A plugged vent can trap dangerous gases and inhibits drainage; similar to plugging a drinking straw with your thumb to hold liquid. Make sure the vent doesn't terminate in the attic. Trapped sewer gases can be dangerous, stink and cause serious structural problems.