Professional Documents
Culture Documents
Hole Tools
10 Golden Rules
for setting
Down Hole Tools
10 Golden Rules for setting Down
Hole
1-Job Preparation
Tools
Find out Casing Size and weight (Tool Dressing)
Depth and Temperature (Rubbers & O-rings)
Tubing Size, Weight & Thread type (X-over & Drill
Collars)
Type of Job
Fishing Diagram
Back up (Spare elements, O-rings, Slips, …) – Best
is to have a second tool ready to go
Function Test
Pop Joints (Avoid long stick ups)
Physical Check (X-over)
Scraper run, Perforations blur will damage the
elements
10 Golden Rules for setting Down
Hole Tools
2- Never hang a String with a loose
connection
Specially while hanging a heavy string down-
hole (Hurricane/ DLT jobs)
10 Golden Rules for setting Down
Hole Tools
3- Minimum Left Hand Turns
Never exceed 3 left hand turns
While unlatching RBP start with 1 turn and
proceed with 1/4 turns
If failed after 3 left hand turns do 5 right hand
turns and repeat
Exception: Storm Valve
10 Golden Rules for setting Down
Hole Tools
4- Surface Handling
Never put slips around packer body
Connect a 5’ Pop Joint on top of the tool
10 Golden Rules for setting Down
Hole Tools
5- Signals At The Tool
Signals at surface may differ from signals the
tool receives down-hole
Send Big Signals specially in deep/ deviated
wells
To make sure Positrieve safety position pick
up as much as derrick lets
10 Golden Rules for setting Down
Hole Tools
6- Up Weight & Down Weight
Record and mark up weight and down weight
of the string and the distance between them
before trying to set the tool
10 Golden Rules for setting Down
Hole Tools
7- Don’t Rely On Your Memory
Write down all steps of the job in a tally book
and take it during the job
Mark setting depth and other important points
on the tubing
record all job data
10 Golden Rules for setting Down
Hole Tools
8- Have Your Eyes On the Weight
Indicator
M/D is the only indicator in setting a tool
Notice and record all changes on M/D during
the job
10 Golden Rules for setting Down
Hole Tools
9- Tight Top To Down
Tightening a connection on the rig floor may
unscrew upper connections
While tightening a string mark and have your
eyes on upper joints
10 Golden Rules for setting Down
Hole Tools
10- Let the elements relax
As soon as the tool is unset before pulling up
let the rubber elements relax for 5 to 10
minutes.