Professional Documents
Culture Documents
Hsifls Trial On Tripoli Site: Slide Subtitle
Hsifls Trial On Tripoli Site: Slide Subtitle
Site
outline
› Introduction
› Conclusion
Introduction
› In P7 inter-frequency load sharing feature has the following
properties:
– Feature : FAJ 121 435
– Triggered at RRC connection setup
– Applies to all calls (R99 and HS)
– Does not take into account UE and cell capabilities
– Triggered only by “non-HSDPA and the HSDPA required power”
– Triggered only when downlink transmitted power is above 50%
(fixed) of the pwradm (configurable).
– Activation at RNC level by setting loadSharingRrcEnabled=1
Introduction
› In W10 two new load sharing features are introduced (in
addition to the existing ones) to balance more efficiently
the traffic between cells:
– HSDPA Inter-frequency loadsharing
– Non-HSPA Inter-frequency loadsharing
Please
refer to
next slides
for param
definition
HSIFLS-Parameter
› coverageRelation Used to define a coverage related candidate cell, that
can be used as a target for load sharing. Applies to both HSDPA and Non-
HSPA load sharing, and is also used by HS cell selection. The following
attributes can be configured:
– hsLoadsharing. If this attribute is set to ON, this coverage relation applies for
HSDPA Inter-frequency load sharing.
– dchLoadsharing. If this attribute is set to ON, this coverage relation applies for Non-
HSPA Inter-frequency load sharing.
– hsCellSelection. Can be set to ON in only one coverage relation out from the same
cell. Defines that this coverage relation applies for HS cell selection.
RNC Feature/Param
hsLoadSharing ON
iflsHyst 5