Professional Documents
Culture Documents
Autocadd Presentation 2
Autocadd Presentation 2
Introduction
Latest Version
AutoCAD Screen
How it Works
Co-ordinate system.
Draw Toolbars
Line
Polyline
Arc
Spline
Modify Toolbars
Array
Offset
Mirror
Trim
Status Toolbar
Introduction
Rectangular
Array
Polar Array
OffSet
• Offset will make a copy of a line or series of selected
lines by a specified distance in the direction
specified.
Basic Modify Tools
• Erase-Select this button then a drawing
element to erase it permanently from the
drawing.
• Copy - The copy command will copy any
selected drawing elements and reposition where
specified by the user, without affecting the
original elements.
• Move- The move command works exactly the
same as the copy command described above,
except instead of creating a copy of the
selected objects, the second objects are
moved.
Mirror
• The mirror command will create a
mirror image of any selected drawing
elements along any line of symmetry
specified by the user.
• This is the logo of Mirror which can
be
found in modify Toolbar
• Use an object selection method to
select the objects to be mirrored.
Press Enter to finish.
Cont…
• GRID
• ORTHO
• POLAR
• OSNAP
Ortho Mode
You can restrict cursor movement to horizontal and
vertical directions for convenience and precision
when creating and modifying objects.
As you create or move objects, you can use Ortho
mode to restrict the cursor to the horizontal or
vertical directions relative to the user coordinate
system (UCS).
For drawing or editing objects at angles other
than 90 degrees, use Ortho Mode
Object Snap
The Object Snaps (Osnaps for short) are
drawing aids which are used in conjunction
with other commands to help you draw
accurately.
Osnaps allow you to snap onto a specific
object location when you are picking a point
Midpoint
End point
Intersection
Center
Tangent
Perpendicular
Parallel
Some Basic Command With
Shortcut:-
THANK YOU…..