The LM35 temperature sensor can measure temperatures between -55°C to 150°C and provides an analog output voltage proportional to the measured temperature without needing external calibration. It has 3 pins - VCC for 4-30V power, Out for the analog temperature output voltage, and GND. The ESP8266 WiFi module is a low-cost standalone wireless transceiver that enables internet connectivity for embedded applications using TCP/UDP protocols to connect to servers and clients.
The LM35 temperature sensor can measure temperatures between -55°C to 150°C and provides an analog output voltage proportional to the measured temperature without needing external calibration. It has 3 pins - VCC for 4-30V power, Out for the analog temperature output voltage, and GND. The ESP8266 WiFi module is a low-cost standalone wireless transceiver that enables internet connectivity for embedded applications using TCP/UDP protocols to connect to servers and clients.
The LM35 temperature sensor can measure temperatures between -55°C to 150°C and provides an analog output voltage proportional to the measured temperature without needing external calibration. It has 3 pins - VCC for 4-30V power, Out for the analog temperature output voltage, and GND. The ESP8266 WiFi module is a low-cost standalone wireless transceiver that enables internet connectivity for embedded applications using TCP/UDP protocols to connect to servers and clients.
LM35 IS A TEMPERATURE SENSOR WHICH CAN MEASURE TEMPERATURE IN THE RANGE OF -
55°C TO 150°C
IT IS A 3-TERMINAL DEVICE THAT PROVIDES ANALOG VOLTAGE PROPORTIONAL TO THE
TEMPERATURE. HIGHER THE TEMPERATURE, HIGHER IS THE OUTPUT VOLTAGE.
IT PROVIDES OUTPUT VOLTAGE IN CENTIGRADE (CELSIUS). IT DOES NOT REQUIRE ANY
EXTERNAL CALIBRATION CIRCUITRY. PIN DESCRIPTION
VCC: Supply Voltage (4V – 30V)
Out: It gives analog output voltage
which is proportional to the temperature (in degree Celsius).
GND: Ground APPLICATION SETUP INTERFACING DIAGRAM WITH ATMEGA-16 PROGRAM TO INTERFACE ESP8266 WI-FI MODULE
ESP8266 WI-FI MODULE IS LOW COST STANDALONE WIRELESS TRANSCEIVER THAT
CAN BE USED FOR END-POINT IOT DEVELOPMENTS.
ESP8266 WIFI MODULE ENABLES INTERNET CONNECTIVITY TO EMBEDDED
APPLICATIONS. IT USES TCP/UDP COMMUNICATION PROTOCOL TO CONNECT WITH SERVER/CLIENT. INTERFACE DIAGRAM WORKING
The ESP8266 WiFi Module is a self contained SOC with
integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.