Professional Documents
Culture Documents
Security Level:
Contents
1. Introduction of MDT
2. Download MDT and Register
3. Hardware Ready and Connect WiFi
4. Configure the NE
a. One-Click Configuration
b. Manual Configuration
4. XPD Test
1. Introduction of MDT
MDT is a Mobile Apps developed by Huawei, to support link commissioning and basic
test with a hand phone only.
It supports configuration by both the script and manual way, and also supports basic
link test such as RSL and XPD test.
It supports multiple way to connect to RTN, including WiFi, AP, and USB direct
connect(on new version RTN900).
2. Download MDT and Register
Two ways to download MDT App:
https://app.huawei.com/mdt/resource/apk/mdt.apk
Note:
For the time being, the MDT App may be
upgraded to newer versions.
User Name:
• Suggest use the same user name for all your involved
projects.
Project Code:
• Zain Sophia: 56A088T
• Mobily: 563069D
After get approval from Huawei, restart the App, and you
will see this page.
Tips:
Q: How to distinguish V and H RTN WiFi?
A: Power on V and H one by one, and search the newly
appeared Wifi after each RTN on.
4. Configure the NE
Manual Configuration
As the WiFi module of RTN380AX works well within a range of less than 20m, if
your antenna height is high, it’s recommended to connect the power of RTN on
the ground, do configuration, and then power off, raise and install the antenna on
tower.
4. Configure the NE
Manual Configuration
Note:
The scripts on server are prepared by Huawei Designers.
If you can’t find your link, contact Huawei Designers as
below:
• Zain: Mohammad Kamran 0591313611
• Mobily: Ahmad T Soboh 0551656977
One-Click Configuration
4. Configure the NE
Manual Configuration
WiFi Password:
Modify_123
a. One-Click Configuration - Connect and Log in to NE
4. Configure the NE
Manual Configuration
4. Configure the NE
Manual Configuration
4. Configure the NE
Manual Configuration
b. Manual Configuration
4. Configure the NE
Manual Configuration
4. Configure the NE
Manual Configuration
4. Configure the NE
Manual Configuration
Choose the Aggregation port between V and H RTN, and change the Port Name to “PLA”
One-Click Configuration
4. Configure the NE
Manual Configuration
4. Configure the NE
Manual Configuration
4. Configure the NE
Manual Configuration
4. Configure the NE
Manual Configuration