Professional Documents
Culture Documents
Electricity 101
Electricity 101
Basics of Electricity 2
Electric Charge
• Some particles have electrical CHARGE; charge can be POSITIVE or
NEGATIVE
3
Structure of Atom
• Two of the tiny particles that make up atoms — protons and electrons —
are the bearers of electric charge.
• Protons have positive charge, electrons have negative charge.
4
Current
• Electric current refers to the flow of the electric charge carried by
electrons as they jump from atom to atom.
• It is the flow of electric charges per unit time.
• It is measured in “Amperes” (A).
5
Basic Electricity
1 Ampere = ?
7
Voltage
• Voltage is the electric potential difference between two points.
• The driving force that causes electrons to move through a conductor is
called voltage or electro- motive force (emf).
• It is measured in “volts” (V)
8
Resistance
• The opposition to the flow of current through the conductor is called
resistance (R) and is similar to friction as shown in fig.
• Like other forms of friction, resistance is responsible for creating heat and
loss of power.
• Resistance is measured in ohms (Ω).
• Resistance could be measured using an Ohmmeter.
9
OHM’s Law
Current in a circuit is directly proportional to the applied voltage and
inversely proportional to the circuit resistance.
V=IR
10
Conductors
• Electrical conductors allow electric current to flow easily because of the
make up of their atoms.
• In a conductor, the outer electrons of the atom are loosely bound and can
freely move through the material when an electric charge is applied.
• Some good Conductors are as follows:
Gold (used for contacts)
Copper (used for cables)
Tungsten (lamp filament)
Steel (conduit and switches)
11
Insulators
• The opposite of a conductor is an insulator.
• An insulator opposes the flow of electricity. Insulators are important to
keep us safe from electricity.
• The wire that carries electricity to your computer or television is covered
with a rubber-like insulator that protects you from getting electrocuted.
• Good insulators include glass, the air, and paper.
12
Basic Electricity
Direct Current
• When a current is constant with time, we say that we have direct current,
abbreviated as DC
Alternating Current
• Alternating current (AC), is an electric current in which the flow of
electric charge periodically reverses direction
13
Single Phase
• Its basically a sine wave AC voltage and current. That is all that is usually
required.
14
Three Phase
• A 3-phase circuit combines three alternating currents of the same
frequency, each 120 degrees out of phase with each other.
15
AC Power Supply Frequencies
16
Sine Wave With Varying Frequency
17
Electric Power
• A watt is the basic unit of electric power.
• One watt is also defined as the amount of work that is accomplished when
a voltage of one volt causes one ampere of current to pass through a
circuit.
18
Real & Reactive Power
Power factor is an energy concept that is related to power flow in
electrical systems.
Real Power
• It is the power that is actually converted into useful work for creating
heat, light and motion.
• Real power is measured in kilowatts (kW).
Reactive Power :
• It is the power used to sustain the electromagnetic field in inductive
and capacitive equipment.
• Reactive power is measured in kilovolt-amperes reactive (KVAR).
19
Power Factor
Apparent power
• It is the combination of real power and reactive power.
• Total power is measured in kilovolt-amperes (KVA)
20
Power Factor
21
Basics of Electricity - Transformer
• Transformer Types of Distribution Transformer
Local in S/S:
– Device used for voltage transformation.
• If placed in Sub Station called Local.
Because of weight restrictions
transformers for pole mounting are not
above 500 KVA
23
Grid Station
• Place where transformer step down the Extra High Tension (132KV) to
High Tension (11KV)
Feeder
– First cable from Grid Station terminating at Sub station/RMU or at PMT is
termed as 11KV Feeder. 24
Substation
Place where HT (11KV) steps down to LT (400V)
25
Substation Layout
26
Switchgear
Combination of electrical disconnect switches, fuses or circuit breakers
used to control, protect and isolate electrical equipment.
27
Basic Electricity
• Circuit Breaker
It is an automatically operated electrical switch designed to protect an
electrical circuit from damage caused by overload or short circuit.
29
Thank You