Professional Documents
Culture Documents
Hardware introductions
Jaka TAURUS
U-Mobile project support document
1 © Nokia 2016
Work Period Standard Site Activity Resource Assigned REMARK
Day 0 Survey done and all additional requirements captured Team Leader
Day 1 Hoisting antenna MW together with ODU, and install the antenna based on TSSR approved. Team2
Day 1 Install DC circuit breaker at Rectifier Power System and feed to MSS4/8. Team1
Day 1 Connection cable RG45/coaxial to ODU and to IDU following data fill MW Team1
Day 2 Hoisting antenna MW together with ODU, and install the antenna based on TSSR approved. Team1 and 2
Day 2 Install DC circuit breaker at Rectifier Power System and feed to MSS4/8. Team2
Day 2 connection cable RG45/coaxial to ODU and to IDU following data fill MW Team1
Align the antenna based on TSSR and meet the RSL as required, and clear from any
Day 3 Team1
interference issues (NE and FE)
Day 3 NMS integrations Team leader & NMS team
Day 3 Measure data (BER Test, Snapshot commissioning, Test interference) Team1
Day 3 Labeling IDU, ODU, Antenna and all cables based on Umobile guideline Team1 and 2
2 © Nokia 2016
Indoor Unit
3 © Nokia 2016
Indoor unit - Shelf
Part Descriptions
Shelf name MSS-8
Slot 8 slot
Power 2 port
supply
Slot info Slot 1 - 2 dedicate for CorEvo
Slot 3 – 8 for Access card (EAC, EAC10G,
EASV2)
Slot 9 - Fan unit
Part Descriptions
Shelf name MSS-4
Slot 4 slot
Power 1 port
supply
Slot info Slot 1 - 2 dedicate for CorEvo
Slot 3 – 4 for Access card (EAC, EAC10G,
EASV2)
Slot 5 - Fan unit
4 © Nokia 2016
Indoor unit – card_CorEvo
Object Descriptions
Port 1 - 8 traffic
Port 1 - 4 Electrical (RJ45), GE
Port 5 – 8 SFP port. Port 5 - 6 up to 10Gbps
Management port LCT
R button Reset
S LED Card Status
A LED Alarm inside
Slot allocations Slot 1
5 © Nokia 2016
Indoor unit – card_CorEvo Top View & Micro SD
6 © Nokia 2016
Indoor unit – card_EAC10G
ODU Status
EAC10G
Status
Object Descriptions
Port 1 – 5 ODU
Port 1 - 2 Electrical (RJ45), PfOE
Port 3 - 4 SFP port. Up to 2,5Gbps
Port 5 SFP port. Up to 10Gbps
QMA ODU power Supply
S LED Card Status
Slot allocations Slot 3 – 8 for MSS-8 & Slot 3 – 4 for MSS-4 (Refer to
design)
7 © Nokia 2016
Indoor unit – card_EASV2
1-4 5-8
Object Descriptions
Port 1 – 8 ODU
Port 1 - 4 Electrical (RJ45), PfOE
Port 5 - 8 SFP port. GE
S LED Card Status
Slot allocations Slot 3 – 8 for MSS-8 & Slot 3 – 4 for MSS-4 (Refer to
design)
8 © Nokia 2016
Indoor unit – Fan unit
9 © Nokia 2016
Outdoor Unit
10 © Nokia 2016
Outdoor unit – Basic
ANTENN
ANTENN ANTENN
ANTENN COUPLE
COUPLE
AIM UBT AIM UBT
A
A A
A R
R // OMT
OMT
Object Descriptions
ODU Name UBT (Ultra Broadband Transceiver)
ODU Type UBT-S, UBT-T
AIM Antenna Interface Module
AIM Type AIM-S (UBT-S)
AIM-T (UBT-T)
AIM-T-D (UBT-T 4+0 XPIC)
AIM-T-O (UBT-T 2+0 XPIC)
Coupler / OMT Combine 2 ODU
11 © Nokia 2016
Outdoor unit – UBT -T
12 © Nokia 2016
Outdoor unit – UBT -S
13 © Nokia 2016
Outdoor unit – UBT 3+0 / 4+0
14 © Nokia 2016
Outdoor unit – UBT
DC power connector
-48 V (-30V to -57V), bifilar or coaxial
15 © Nokia 2016
Outdoor unit – UBT
Electrical
(GE/PFoE)
DC power
Optical
(1 / 2.5 / 10SFP)
16 © Nokia 2016
Outdoor unit – UBT Visual check
1 port TX & RX
Single Allignment port UBT -
(AGC)
S
17 © Nokia 2016
Outdoor unit – AIM
RFID
AIM- DO
S NOT
REMOV
E RFID
RFID
AIM-T
AIM-T-D AIM-T-C / O ODU
18 © Nokia 2016
Side
Outdoor unit – Preasure windows
DO NOT
REMOVE the
yellow plastic
(preasure
windows)
At ODU, AIM,
Coupler, Nose
adapter &
antenna (if any)
19 © Nokia 2016
OCTIS connector
DC power
Electrical
(GE/PFoE)
Optical
(1 / 2.5 / 10SFP)
20 © Nokia 2016
OCTIS connector_ODU Connection
21 © Nokia 2016
OCTIS connector_1+0_UBT-S
UBT-Single
22 © Nokia 2016
OCTIS connector_2+0_UBT-T
23 © Nokia 2016
OCTIS connector_4+0_UBT-T
UBT-Twin
Flextwist
AIM-T-C
4+0 RLAG
600-4000Mbps UBT-Twin
Flextwist
AIM-T-C
24 © Nokia 2016