linking Step 1: Double Click on Device, new window will appear Step 2: Right Click on the white screen of device configuration and click “Device Toolbox (X)” new window will appear Step 3: On the Device tools Box, click “Device manager” new window will appear Step 4:Double on click serial port to be added on the device chosen, see next image. Step 4: To add a PLC for device chosen, expand +PLC, expand your specified brand (+siemens), highlight specific model (+S7200PPI) and click add and a pop window will appear see next image Step 5: click Yes. Click OK to save Device Manager settings. See next image Step 6: Double Click first “serial port” and next double click “Siemens_S7200PPI “. serial port and siemen_S7200PPI must appear on device configuration. See next image Step 7: Double Click on serial port and set the following: See next image •serial port to 0 – COM1 •data check mode to 2 - even Step 8: Click OK to accept changes and close device configuration and save it to accept changes HMI now is ready for PLC Linking