Professional Documents
Culture Documents
Flowchart - RL Failure
Flowchart - RL Failure
T_L1_Sync_ReEstab_Wait –
timer started in RNC = 2s RRC_ConnRe-estabTmr – RRC: CELL Next
Next
Timer T_RLFAILURE started timer expired UPDATE received slide
slide
NRT
Timer T313 started Radio Link Failure If
If T315
T315 >> 0,
0, the
the waiting
waiting of
of
RT T315 value is checked RRC connection re-
“out of sync” indicators RT establishment is initiated
NRT RNC
RNC receives
receives If T315 = 0, then all NRT
NBAP:RADIO
NBAP:RADIO
Re-establishment LINK FAILURE
FAILURE ––
radio bearers (also the RT
RB(s), if existing) are released
All the RT radio bearers
are released and Iu
N313 amount of “out of timer T315 started message form BTS
with a cause value
locally and the Iu release request release request with a
sync” indicators When the criteria for radio link with a cause value ‘Radio cause value ‘Failure in
"Synchronization
"Synchronization Connection
failure are fulfilled. Failure" Connection With
With UE
UE Lost’
Lost’ is
is sent
sent Radio Interface
Cell Reselection Failure" to the PS CN(s)
The timer is started only if radio Procedure’ is sent to the
bearer(s) that are associated with CS-CN
Next
Next T315 exist. NRT radio bearers are
slide
slide associated with T315 T315 expired
T302 running => continue
to wait response to cell T302 not running =>
update, according to T302
enter idle mode