Professional Documents
Culture Documents
Synopsis Presentation: Submitted by Engr M Ikhlaq Submitted To DR Zeeshan Khan SB
Synopsis Presentation: Submitted by Engr M Ikhlaq Submitted To DR Zeeshan Khan SB
Submitted by
Engr M ikhlaq
Submitted to
Dr Zeeshan khan sb
Objective:
• It has a low initial viscosity. For processing a sample using this epoxy
resin and hardener, 100 parts by weight of the CY1300 resin is mixed
homogenously with 25 parts by weight of the HY956 hardener.
Fillers types
• As for the fillers, highly pure grades of commercially
available uncoated particles of :
• TiO2 [nano-filler size ≈ 50 nm, micron filler size ≈ 0.5 μm],
• Al2O3 [nano-filler size ≈ 45 nm, micron filler size ≈ 50-60
μm]
• ZnO [nano-filler size ≈ 45- 70 nm] are procured from Sigma
Aldrich and used for the experiments.
EPOXY NANOCOMPOSITE SYNTHESIS AND
SAMPLE PREPARATION
• A processing method involving combination of two different techniques is used to
prepare the nanocomposite samples with different fillers
• high shear mechanical mixing at 700 rpm for 60 s followed by ultrasonication for
1 hour.
• An important parameter during the experiments is the need for vacuum evacuation
during polymer processing. The presence of air bubbles, moisture or other
unintended matter in the polymer matrix can act as defects,
DSC MEASUREMENTS