Professional Documents
Culture Documents
PtxMaxHSDPA
0..50; 0.1; 43 dBm PtxMax 43 dBm
PtxTarget PtxHighHSDPAPwr
-10..50; 0.1; 41 dBm
PtxTotal
PtxTargetPSMax
-10..50; 0.1; 40 dBm
PtxTargetPS PtxTargetPSMin
-10..50; 0.1; 36 dBm
Optimum
load target PtxNonHSDPA PtxNRT
Optimum load target calculated by RNC in dependence on
• Maximum cell power
• Non controllable power PtxNC
• Weights of the NRT users
PtxHighHSDPAPwr
-10..50; 0.1; 41 dBm
PtxTotal
PtxTargetPSMax
-10..50; 0.1; 40 dBm
PtxTargetPS PtxTargetPSMin
-10..50; 0.1; 36 dBm
Optimum
load target PtxNonHSDPA PtxNRT
PtxNC
PtxMaxHSDPA: Parameter defines the maximum allowed HSDPA transmission power. RNC sends the value to the BTS in HS-
PDSCH, HS-SCCH, E-AGCH, E-RGCH and E-HICH Total Power IE of the NBAP: PHYSICAL SHARED CHANNEL
RECONFIGURATION REQUEST message (TS 25.433)
PtxHighHSDPAPwr: This parameter defines the threshold of the PtxTotal measurement that indicates high usage of HSDPA
power. Indication is used as a trigger for the adjustment of the dynamic target level for DCH packet scheduling when one or
more HS-DSCH MAC-d flows is set up in the cell.
PtxTargetPSMax: This parameter defines the maximum allowed target level for DCH packet scheduling when one or more
HS-DSCH MAC-d flows is set up in the cell. The target level is determined by the dynamically adjusted PtxTargetPS threshold.
PtxTargetPSMin: This parameter defines the minimum allowed target level for DCH packet scheduling when one or more HS-
DSCH MAC-d flows is set up in the cell. The target level is determined by the dynamically adjusted PtxTargetPS threshold.
PtxTarget: This is the target value for total transmitted power in a cell. A real-time Radio Access Bearer is not admitted, if the
estimated non-controllable power exceeds this threshold.
Default value should be 3dB below the Cell maximum transmission power.
• MaxDlPowerCapability Vs PtxCellMax
• Identificación de celdas donde MaxDlPowerCapability < PtxCellMax
• PtxCellMax Y PtxPrimaryCPICH
• Normalización de PtxCellMax en 4 valores únicos de acuerdo a MaxDlPowerCapability
• Asignación de valor único de PtxPrimaryCPICH por cada valor de PtxCellMax