Professional Documents
Culture Documents
3 : 1 : 1
The Epoxy Primer surfacer – provided in the same
color of topcoat, applied over the ballistic steel
to protect from corrosion and to achieve good
leveling for high quality finishing.
Spray gun: HVLP (1.6 – 2.0mm nozzle) no. of coats: 1-2 spray passes
Drying time: 10 – 12 hours @20 ̊C [30 min @60 ̊C] Pot Life: 5 Hours
1
PAINTING SYSTEM
for Ballistic steel (Armored vehicles)
2
PAINTING SYSTEM
for Ballistic steel (Armored vehicles)
2 : 1 : 10 – 20%
The 2K paint is applied interior of the vehicle and parts as per the
design of the model. The applied parts are allowed to cure before
the assembly
Spray gun: HVLP (1.3 – 1.4mm nozzle) no. of coats: 2 spray passes
Drying time: 6 – 8 hours @20 ̊C [30 min @60 ̊C] Pot Life: 4 Hours
3 : 1 : 10 – 20%
The texture paint is applied on the exterior of the vehicle and
accessories that are assembled on the outside of the vehicle.
Spray gun: schutz gun (4 – 5mm nozzle) no. of coats: 2 spray passes
Drying time: 3 - 4hours @20 ̊C [30 min @60 ̊C] Pot Life: 2 -3 Hours
3
PAINTING SYSTEM
for Ballistic steel (Armored vehicles)
2 : 1 : 10 – 20%
2 : 1 : 10 – 20%
The exterior of the vehicle is applied with semi gloss Clearcoat over
the vehicle body to achieve a uniform gloss level
Spray gun: HVLP (1.3 – 1.4mm nozzle) no. of coats: 2 spray passes
Drying time: 6 – 8 hours @20 ̊C [30 min @60 ̊C] Pot Life: 4 Hours