The document describes relationships between component part numbers for a plummer block assembly. It states that the last three digits of a bearing number are equal to the plummer block number minus 300, and the sleeve number is the last three digits of the bearing number plus 100. An example is provided where a plummer block with number SN 520 would have a bearing number of 22220EK and a sleeve number of H320. It also notes that the last two digits of a bearing number indicate the shaft diameter in millimeters.
The document describes relationships between component part numbers for a plummer block assembly. It states that the last three digits of a bearing number are equal to the plummer block number minus 300, and the sleeve number is the last three digits of the bearing number plus 100. An example is provided where a plummer block with number SN 520 would have a bearing number of 22220EK and a sleeve number of H320. It also notes that the last two digits of a bearing number indicate the shaft diameter in millimeters.
The document describes relationships between component part numbers for a plummer block assembly. It states that the last three digits of a bearing number are equal to the plummer block number minus 300, and the sleeve number is the last three digits of the bearing number plus 100. An example is provided where a plummer block with number SN 520 would have a bearing number of 22220EK and a sleeve number of H320. It also notes that the last two digits of a bearing number indicate the shaft diameter in millimeters.
Relationship between Plummer block No, bearing No, Sleeve No. • Last three digit of bearing is=Plummer block digit-300 • Sleeve No=last three digit of bearing+100 • Sleeve No is denoted by H. Example • If Plummer block no is SN 520 • Last three digit of bearing is=Plummer block digit-300 • Last three digit of bearing is 520-300=220 • Sleeve No=last three digit of bearing+100 • Sleeve No=220+100=H320 Example • If Plummer block no is SN 520 • Bearing no is 22220EK or 22220EK/C3 etc. • Sleeve no is-H320 Relationship between bearing No, Shaft no. • Shaft diameter=last two digit • For below 22214 bearing no sleeve thickness is 5mm • For above 22214 bearing no sleeve thickness becomes 10mm Example • If bearing no is 22220EK/C3 • Shaft diameter=2 • Shaft diameter=(100-25)=90mm • =10mm Example • Bearing no is 22220EK/C3 sleeve thickness is 10mm. • For 60mm shaft both 22213 and 22214 bearing can be fitted. Thanks for watching