Professional Documents
Culture Documents
Objective:
This document contains the OC common ProE setting. This is to enable the CAD be efficiently
review/reused.
For:
All OC ProE user
Instruction:
Sentences in bold red are compulsory requirements for all projects, unless approved by the
project supervisor.
ProE Setting and Common Practice
The ProE folder Storing external Data like ID master, PCBA,
Mechanism etc
Feature
tool bar
Model tree
(orca-tree.cfg
setting)
Filter
ProE Setting and Common Practice
The Default part and OSD project part
Changing accuracy will cause feature fail. The default part and assembly
template need to set correctly from the start.
ProE Setting and Common Practice
Top Down Design
XXXX_case_top
XXXX_id_master me
rge
rge
e
XXXX_layout m
For complex assembly, use id master and layout to merge to the case part. The layout file should
have important datum like the datum plane “PCB”, which will be the bottom surface of the PCB.
For simple assembly without mechanism, the feature in layout can be build in id master, and part
only need to merge the id master.
The id master and layout should have specific layer control. Unnecessary layer should be
avoided because all layer will be inherited by the part and crowd the layer window.
ProE Setting and Common Practice
The file structure
XXXX_main_assy.asm
XXXX_PCB.asm
XXXX_PCB.prt
XXXX_case_top.prt
XXXX_case_bottom.prt
XXXX_screw_mc_M2x6.prt
XXXX_screw_st_M2x6.prt
XXXX_bracket_pcb.prt
XXXX_printmech.asm
1. The external CAD should be converted and named properly before assembled into main assy.
2. The external CAD should be placed in folder with date code e.g. PROE\EXT\DUPLEXER\091117
3. The config.pro should add the search path.
4. When there is updated external CAD, it should be named properly and placed into folder with new
date code.
5. The config.pro search path should be change accordingly. Make sure that the old search path is
deleted to avoid data mixed up.
Main assy
091117_saipan_duplexer. Assembly
created to import external data.
Assembled default or using TFR
H0
ProE Setting and Common Practice
The View Manager – Simp Rep
and Style
Simp Rep:
1. Unit – have only the component
in shipping condition
2. Case_part – have only case part
3. Interference - For global
interference checking
Style:
Select “SolidGeom”
1. Do not create relation in the assembly. Part must only refer to id master and layout.
Exception is PCB which refer to component and case part to create holes and keep out area
2. Do not mirror feature. Mirror of surface is permitted.
3. Do not use “hole”, “rib” and advanced feature like “lip” and “slot”. The normal protrusion is
more flexible and robust.
4. Put “draft”, “round” and “chamfer” at the end of the model tree. Do not scatter around.
5. If a new datum is needed for sketch plan, it should be created “on the fly”. The sketch also
should be embedded into the feature whenever possible
ProE Setting and Common Practice
Modeling Best Practice (sketch)
The1orca_dtl.dtl
tol_display yes To display tolerance in drawing
2 gtol_datums std_asme Datum display according to ASME
3 projection_type third_angle Change to first_angle for some Europe drawing