Professional Documents
Culture Documents
If the you can read this If the you can read this
Click on the icon to Click on the icon to
choose a picture or choose a picture or
Reset the slide. Reset the slide.
To Reset: Right click on the slide To Reset: Right click on the slide
thumbnail and select ‘reset slide’ or thumbnail and select ‘reset slide’ or
choose the ‘Reset’ button on the choose the ‘Reset’ button on the
‘Home’ ribbon (next to the font choice ‘Home’ ribbon (next to the font choice
box) box)
2
1
100mm lifted
Model
1.MOTOR: 10 Kg
2.CONTROLLER BOX: 7.0 Kg
3.HEX: 11Kg
4.COMP. WEIGHT ZPV038DE-4X9: 20.8Kg
Mesh model
Results
Displacement
89.4mm
Stress 204MPa
Plastic strain 0.02
Stress 295MPa
Plastic strain 0.02
Stress 175MPa
Results Plastic strain 0.001
Stress 207MPa
Stress 192MPa Plastic strain 0.03
Plastic strain 0.007
Results
Stress 171.5MPa
Plastic strain 0.009
Stress 183.5MPa
Plastic strain 0.03
Results
Conclusion :
In many cases stress value is very low and below 184 MPa,on the other side
stress value is higher is only near screw and edges highlighted in all slides
In slide 6 stress value is low but stress is distributed in higher area and the part is
displaced a bit from the position so need to add screw near highlighted area