Types of suspension system, 1. Mechanical or standard suspension, 2. Mono suspension, 3.Telescopic suspension. Parts in telescopic suspension. Working of oil filled or telescopic shock absorbers. SUSPENSION Suspension is a assembly of springs, shock absorbers and linkages which connect the motor cycle to its wheel. The motor cycle has a front suspension and rear suspension. Working of suspension system: Suspension system consists of two basic components spring and shock absorber it works on the basis on the basis principle of spring energy. Telescopic suspension system: Telescopic suspension is mainly used for front suspension system. The bottom of the forks is connected to the front axle around which the front wheel spins. Parts: 1. Fork tube 2. Spring 3. Fork seal 4. Slider 5. Damper valve 6. Fork oil 7. Damper bolt 8. Drain. Standard coil suspension: Standard coil suspension is generally used for rear suspension system in motor cycle. It has two sets of shock absorbers. It is connected to chassis on the upper end and swing arm at lower end. This standard coil suspension system works by hydraulic system. It bears the heavy loads. Mono-cross suspension system: This mono cross suspension system used mostly for rear suspension system. Mono-shock are said to eliminate torque to the swing arm and provides more consistent handling and braking.