Professional Documents
Culture Documents
Presented by
B.Uzma Kousar[18F21A04F2]
K.S.Sarfaraz Hussaini [18F21A04C8] P.Varalakshmi[18F21A04F3]
B.Sai Kumar Reddy[18F21A0409] K.Vinay Kumar[18F21A0437]
Supervisor :
Dr.S.Kannappan, Ph.D.,
Professor
Dept of E.C.E
GATES Institute of Technology
Gooty.
03/23/2022 2
Introduction
03/23/2022 3
Problem Statement
03/23/2022 4
Objective
Our solution to this issue is a Social Distancing Sensor, a
system that alerts users when they are within 6 feet of
someone else.
This system consists of multiple devices that communicate
with each other through ultrasonic (US) signals and radio
frequency (RF) signals.
The devices are programmed with the use of arduino so that
when any two units come within 6 feet of each other, both
units begin beeping, hence notifying both users wearing
these devices to step away from each other.
03/23/2022 5
Circuit Diagram
03/23/2022 6
COMPONENTS
ARDUINO UNO
ULTRASONIC SENSOR(HC-SR04)
BUZZER
BATTERY WITH CAP
RESISTOR(200 Ω/220 Ω)
LED LIGHT(RED)
JUMPER WIRES/MALE TO FEMALE WIRES
03/23/2022 7
CONSTRUCTION
03/23/2022 8
Result
03/23/2022 9
Working
03/23/2022 11
Advantages
Disadvantages
If the battery does not work properly, then we may not get any remainder
from the device
It is short ranged.
It is very sensitive in nature.
If any one of the component does not work properly, then it does not respond
properly
03/23/2022 12
Conclusion
03/23/2022 13
Thank
You
03/23/2022 14