Professional Documents
Culture Documents
USING
LOOKUP FUNCTION
• First step
• Then go global well logs under Wells Icon and select the check shot
you have loaded for your well
Figure 1
Figure 2
• Go to the 5th icon as seen in Fig 3 below and click it.
• Click ok and the straight line graph equation will be generated. You will find it
under Input as ‘ Z_vs_TWT_picked’ in most cases.
• You can edit the straight line to pass through most of the points. To do that click
on the 7th icon in Fig 4
• But it is advice that check shot data is a very strong data and should not be
edited unless otherwise.
Figure 3
Figure 4
To Use the function equation for Depth conversion
• Go to your Time map and right click it.
• Choose lookup and use the blue arrow to bring in your lookup equation.
• Click run and ok.