Professional Documents
Culture Documents
BASIC COMPUTER
NETWORKING
LESSON 9. SETTING-UP COMPUTER NETWORKS (SUCN)
LO 1 Install network cables
1.1 Plan cable routes in accordance with network design
and actual installation site
UTP Assembly
EGMIS CSS 11
UTP Assembly
EGMIS CSS 11
Steps
1. Pull the cable off the to the
desired length and cut.
EGMIS CSS 11
2. Strip one end of the cable with the
stripper. If you are using the stripper,
place the cable in the groove on the blade
(left) side of the stripper and align the end
of the cable with the right side of the
stripper. This is about right to strip a little
over 1/2" of the jacket off the cable. Turn
the stripper about one turn or so. If you
turn it much more, you will probably nick
the wires.
EGMIS CSS 11
Thank You!!!